Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 10-inch, black rubber keel roller and a galvanized steel panel bracket with slotted mounting holes for adjustability.
Features:
Specs:
Typically installed upright on the rear and middle crossmembers of a boat trailer, keel roller panel bracket assemblies to keep the boat moving while it is being loaded and to stabilize the keel.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (83 Customer Reviews)
This roller assembly supports your boat's keel for easy loading and safe transport on your trailer. It features a 10-inch, black rubber keel roller and a galvanized steel panel bracket with slotted mounting holes for adjustability.Combined bunk rollers and a keel roller (along with winch and lumber) to create a way to lift and store our 22' kayak. Works like a dream!
I have ordered products from eTrailer over many years
Their website, product selection, and service have always been excellent!
Quality rollers for the trailer. Perfect description so I got the right parts.
it took a week for it to go across the river, it was sent usps, not good
I use this on a pickup truck bed extender for loading and unloading a heavy kayak. It works great. I am impressed with the quality of construction and sturdiness of the entire unit. I expect many years of use.
great product. worked perfectly.
Etrailer has become my go-too place for anything trailer related. I have three boats and always seem to be upgrading my trailers after much repeated saltwater use and long distance towing. I used these grooved rollers on my 18 ft CC replacing some small, weak non-tapered type. I always had issues with those narrow rollers especially loading in any kind of cross wind conditions. These rollers center you out and keep you in much better alignment. They're a good buy especially when paired with the galvanized mounting plate. I would recommend these to anyone that has had problems keeping a boat on track while loading.
I’m very satisfied with this product. I found the videos describing this product and how to install it most helpful. I already installed it on my sailboat trailer. etrailer.com also responded to my questions that I sent via email about the weight distribution between the keel rollers and bunks. This product is a great value for the price and it was shipped to me within a few days after I placed my order online. I would highly recommend it to others.
Good quality construction - nice and rugged. Installed easily onto a new trailer. Seems to be holding up fine. The black roller is leaving a mark on the white keel of my boat. Not a big issue but it would be nice to have the roller not leaving a mark. I don't recall there being an option on this item with a non-marring roller. Overall satisfied. Thanks.
looks like it will work. however I purchased the wrong size. Should have ordered a 12 roller instead
Heather A.
4/5/2022
If you need a 12 inch roller you can use CE Smith Deep V Keel Roller part # CE10405G which is 12 inches wide. The mounting slot distance is 10 inches apart.
Worked great - I personally don't like those " press on " cap ends to hold roller pin in so got threaded bolt on both ends and put " no loosen nuts" on end. Other than that well built roller and etrailer is the bomb for parts - fast shipping and great folks on the phone.
CE Smith rollers have a well galvanized base plate and are robust. They will last a long time in the salt environment!
The shipment came fast and the quality was great. Apparently i needed a 13 1/4" roller shaft - the 13" was just a hair short. I was very pleased w/ the service.
Went to get boat and lost rubber roller off empty trailer. Poor clips holding the roller in the mount.
I needed a number of things and found EXACTLY what I needed as my winter garage project is modifying an old trailer to safely accommodate a vintage runabout. Amazing array of products, always top notch quality, great communication, reasonable prices and quick delivery, etrailer.com is the one-stop of trailer parts and many other essential products. I'm a fan.
I received delivery very fast, great company! I am using the rollers on a dock to make it easier to pull in my sunfish and 14 foot aluminum boat. They are perfect for this application! I highly recommend the rollers for any similar application.
Heavy weight frame-well built. I always use CE Smith products when available.
Excellent Quality of all three roller assembly. Replacing the old rollers with these will help me guide the boat on the trailer much easier.
Replaced rusted out roller bracket with new and is working fine.
Absolutely great. Was a replacement for a worn out roller. Fit perfectly. Good quality.
rubber - Quality, Sturdy, industrial strength.
galvanized bracket - strong, heavy also industrial strength takes 1/2''bolt
Overall excellent experience. Shipment arrived ahead of schedule and was exactly what I ordered. Etrailer.com is now on my favorite bookmarks!
Excellent product. I use it to easily roll my small fishing boat up onto a lift.
Perfect for it intended application
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Joe
6/16/2021
After a year of use I am still very satisfied.