Replacement U-Bolt for 1-1/2" Wide, Square Trailer Axles - 1/2" Diameter - Raw Finish
(82 reviews)
Price: $15.60
In Stock
Replacement U-Bolt for 1-1/2" Wide, Square Trailer Axles - 1/2" Diameter - Raw Finish
Item # 1753223
Our Price: $15.60
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (82)
- Q & A (0)
- Videos (1)
- Photos
Redline Trailer Suspension Parts - 1753223
- U-Bolts
- Camper
- Car Hauler
- Utility Trailer
- Square Axle - 1-1/2 Inch
- 5 Inch Long
- 1/2 Inch Diameter
- 3500 lbs
- Redline
5" Long U-bolt works with a U-bolt plate and another U-bolt to help secure your 1-1/2" wide, square trailer axle to its leaf springs. Raw finish.
Features:
- Replacement U-bolt acts as part of a trailer suspension system
- Used with another U-bolt (sold separately) and a U-bolt plate (not included) to secure one side of your axle to a leaf spring, which is mounted to your trailer's frame
- Square bolt fits square axle beams
- Raw finish
Specs:
- Application: 1-1/2" wide axles
- For 3,500-lb axles only
- Bolt size: 1/2"-13
- Length: 5"
- Inner width: 1-1/2"
- Distance between bolt ends (on center): 2"
- Quantity: 1 U-bolt
Replacement U-Bolt for 1-1/2" Wide, Square Trailer Axles - 1/2" Diameter
Replaces 1753223 U-Bolt for 1-1/2" Wide Square Trailer Axles
Video of Replacement U-Bolt for 1-1/2" Wide, Square Trailer Axles - 1/2" Diameter - Raw Finish
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redline Trailer Suspension 1753223 Review
Today, we're going to be taking a look at a replacement U-bolt with nuts for 1 1/2" wide square trailer axles. You would use the U-bolt with a U-bolt plate and an additional U-bolt with the same dimensions to secure an axle to the leaf springs, which are mounted to the trailer frame. This is going to feature a threaded portion on each end. That threaded portion measures about 2" on each side. If we put a ruler on that, you can see that the threaded portion, from the bottom of the post to the top of the thread, measures 2" long. This is designed to fit a square 1 1/2" wide trailer axle. It is for 3500 pound axles only.
It's going to come with the included nuts. The opening is going to measure about 1 1/2", so that's how we can tell it's for 1 1/2" wide trailer axles. The bolt diameter is 1/2". The length from the bottom of that portion, there, to the end of the threaded area is going to measure 5" long. Then, again, that opening is going to give us an inside width measurement of 1 1/2". That's going to do it for today's look at the replacement U-bolt..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Replacement U-Bolt for 1-1/2" Wide, Square Trailer Axles - 1/2" Diameter - Raw Finish - 1753223
Average Customer Rating: 4.9 out of 5 stars (82 Customer Reviews)
5" Long U-bolt works with a U-bolt plate and another U-bolt to help secure your 1-1/2" wide, square trailer axle to its leaf springs. Raw finish.by: Gerald 11/16/2022
Nice quality and length to replace on tent trailer square axle u bolt
by: BD09/23/2017
I looked all over for a u-bolt to replace one that broke on my 70's era horse trailer. I was about to give up when I found an exact match on etrailer.com. These shipped fast, were packaged well, and are just what I needed!
by: Scott 04/28/2023
Dependable fast service, fast delivery quality parts
by: s.Graham 09/11/2016
Purchased these for a vintage camper trailer repair for a customers camper . The u bolts where not available to me locally anywhere , I found your store online and saw the dimensions chart giving an exact description of what I was ordering . The u bolts arrived quickly and was just what I needed , these bolts where good grade bolts and nuts and not cheep junk .Thank you for being a seller of quality I WILL PURCHASE FROM THESE GUYS AGAIN ...
Steven G.
9/11/2017
Working great ,,no complaints. ....
by: Robert11/22/2021
I ordered 4 square u-bolts and 2 plates as part of replacing the axel on a 1977 small boat trailer. Needed longer u-bolts than I fond any place else, but trailer had ones that could work. Ideally would have preferred stainless or at least galvanized for use in salt water, but at least could get trailer back on the road. 1 of the 4 u-bolts I ordered was narrower than the rest, had to be forced on at risk of damaging the threads. The center hole in the plate was too small to fit over the top bolt head on the leaf spring; so had to resort to under slung install - which was not the original trailer setup.
Jenny N.
11/23/2021
I will have our customer service team reach out to you. I would recommend using a corrosion resistant spray with the u bolts and plate. When using in salt water then rinsing off the u bolts and plates with freshwater will help to length the life of the parts.
by: Haley05/31/2020
Excellent product and hard to find. The shipping was super fast which allowed me to finish my project fast!
by: Eric 08/06/2020
Very happy with the great product, great price, as well as fast, fair-priced shipping. Will definitely use etrailer again when the need arises.
Eric
8/30/2021
I sold the trailer that this part was installed, but the installation went smoothly, and I was happy with my purchase.
by: Marc C.03/02/2019
My etrailer.com parts fit exactly to the specifications needed for the little green trailer I was restoring. Thanks etrailer.com for having some difficult to find parts available for my project. Shipping and communication was excellent as well.
by: Kenneth 11/08/2019
I have a1962 camp trailer that I wanted to reverse the axle
I searched through my city, and was not able to find square U bolts
I went to our”Trailer” expert business and was told they not linger carried 1 1/2 bolts, they referred me to a speciality spring shop only to find he did not have the capability
I finally look online and found that Etrailer had in stock
I will now go to Lori at Etrailer 1st
by: Julio 11/08/2019
Haven't installed them yet but they look perfect—the videos on you site are extremely helpful, but it would be even better if you suggested this product any time someone browses or buys a set of 1.5" wide leaf springs (ideally you'd suggest both this product and the U-bolt equivalent to cover both folks with square and cylindrical axles).
Thanks again for your excellent service!
by: Joshua P09/12/2020
Used this to mount tail light brackets on my old M101-A2 trailer. Fit like a glove around the framework.
by: Marlene 09/20/2020
We are working on a vintage Shasta travel trailer. We were thrilled to find a very necessary part . 2 U-bolts ..the RIGHT size. E-Trailer were very helpful in filling our order. Clear, concise and prompt delivery. We will use them again.
by: Darrell10/29/2014
My experiance in dealing with etrailer could not have been beter. they were frendly, new there products and got me the right kit for the trailer I was working on. The quality is very good.
by: Robin R08/12/2018
Quality Bolt. I will use Etrailer again. I could not find these bolts locally mainly because I work six days a week and the parts suppliers in the area only work five.
This made Etrailer a awesome option. Price was the same as the local suppliers and I had the parts in four days allowing me to finish my trailer without having to take time off from work to chase parts, another added savings. Thank you Etrailer.
by: David 04/14/2020
Exactly what I needed to fabricate two mounting brackets to attach the canopy I built for my Kubota.
Thanks!
by: Kevin 09/20/2019
Fit perfect for an older trailer with 1.5 in axle and 1.75 leaf springs. Exactly what I was looking for. Thank you etrailer!
by: Darrell08/01/2019
I sent for 4 ubolts for my horse trailer because etrailer was the only one who had the right size . I ordered them overnight and they came at 12 so o had time to put them on the next day .
I put them on they fit they were the ones I ordered so o saved $680 by using my own trailer and not needing to hire a hauler .
I’m extremely happy with my purchase and the speed it got here so I give 5 stars because you guys earned them .
Thank you
I’d do business with you again in a New York City second !
by: 88inNH10/01/2020
Exactly what I needed.
Arrived quickly.
Trailer still in use.
Should outlast the old trailer I put them on.
by: Joe J07/18/2019
I couldn't find the proper size at any stores near me, found them at "etrailer" at a great price with reasonable shipping and received them a day earlier than expected, they fit perfectly, definitely will keep "etrailer" in mind for future projects
by: Lea05/09/2020
product is very high quality and will more than likely last the life of my boat trailer. i'm very pleased with product,thank you.
by: Joe M.09/18/2013
It is hard to find U-bolts to fit older camp trailers (1969) But these U-bolts from etrailer were well made and fit perfectly-thanks.
by: Patrick F10/07/2019
Product is high quality and as described on etrailer.com. Extremely happy with purchase. Will definitely visit site again.
by: Val Jeter03/08/2012
U-bolts and plates will be used to fabricate guide posts for my boat trailer. Great product !
by: Dennis 09/25/2020
This went very well. The parts were exactly what I needed and I received them when promised. In addition, the web site detail for the parts was great as I was able to order the parts to 3 critical dimensions as clearly displayed on the web site. Thank you so much.
by: Nick07/19/2011
First off, the bolts fit a 1/12 axle with the kind of snugness that promotes confidence..
They are accurately made, and fit my suspension well.
25
82
Show More Reviews
See what our Experts say about this Redline Trailer Suspension Parts
- How to Determine Axle Weight Capacities on a TrailerThe axle capacity should be stamped on the frame of the trailer near the coupler of the trailer. It also could be listed somewhere on the axle. I wish there was an industry standard weight capacity for the 1.5 inch by 1.5 inch square solid steel axles but there is not. If you do not see a weight capacity listed in either of those places you can remove the hubs on your trailer and give me the bearing numbers that are listed on the spindles. I will be able to tell which hubs and spindles...
view full answer... - What is the Torque Requirement for 1/2 Inch U-Bolts for Trailer SuspensionAccording to our FAQ on slipper springs, linked for referenced, the torque specs are as follows: Torque Ratings 1/2 inch Bolts: 45 ft/lbs - 70 ft/lbs 9/16 inch Bolts: 65 ft/lbs - 95 ft/lbs 5/8 inch Bolts: 100 ft/lbs - 120 ft/lbs The Replacement U-Bolt, # 1753223, uses a 1/2 inch nut so it would fall into the 45 to 70 foot pound category.
view full answer... - Should Trailer Leaf Springs Be Easy to Move Up and DownIf the slipper springs on your trailer have a lower capacity like # WIC2 at 500 pounds apiece, then it would be possible to physically compress them with the trailer empty but it should not be all that easy. With a load on the trailer it will be easier. If you find that you can move the springs then it is probably time for some new ones. On higher capacity springs you probably would not be able to move them at all without a load on the trailer. I have included a link to our slipper spring...
view full answer... - Replacing Grease National 6362 Seals On A 1962 Circle J Horse TrailerFinding parts for a trailer that old can certainly be tricky. According to what I can find online, the national 6362 seal has an ID of 1.687" and an OD of 2.627". It looks like they are still out there in circulation, but unfortunately we do not carry an equivalent of the national 6362 seal. Since the trailer is over 60 years old, it may prove very difficult to find replacement parts. In this case we recommend replacing the entire axle with something more standard. If you want to go that...
view full answer... - Recommended U-Bolts And Plate For A 1-1/2" Wide Square AxleHey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part # CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square Trailer U-Bolts # SP01-120 and two of the U-Bolt Plate # 115983 to mount your axle to the leaf springs # SP-210275.
view full answer... - What is the Weight Capacity of a Trailer Axle with # L44643 Inner and Outer Trailer BearingsIf both the inner and outer bearing are # L44643 bearings, that means it can fit on a BT8 spindle. One BT8 spindle, like # TRU94FR, has a capacity of 1,000 pounds. So on a single axle with 2 spindles, it would have a 2,000 pound capacity. The axle and/or trailer capacity should be on a sticker or plate on the trailer tongue.
view full answer... - Does the Replacement U-Bolt for 1-1/2 Wide Square Trailer Axles Come with the NutsYes. The Replacement U-Bolt for 1-1/2" Wide, Square Trailer Axles - 1/2" Diameter # 1753223 does come with the matching nuts to secure these U-bolts to your axle to the leaf spring with a U-bolt plate. I've linked the review video of these U-bolts that shows the nuts that are included with these, they're just not included in the product photos currently, so I can see why this might be confusing.
view full answer... - What is the Axle Capacity for an Old Trailer with Hub # 22834The bearing numbers you have provided indicate that you have hub 22834. This hub is no longer made but there are parts for it such as the bearings # 2788 and # 1779 an the races # 2729 and # 1729. The hub is rated for 2,600 pounds which means it fits a 5,200 pound axle.
view full answer... - Replacement U-Bolts Compatible with CE Smith U-Bolt Kit for 1-1/2 Inch Square AxleThe CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc # CE23102 unfortunately doesn't have direct replacement parts outside of the kit. The Replacement U-Bolt with Nuts for 1-1/2" Wide, Square Trailer Axles - 1/2" Diameter # 1753223 is the closest we have to what you are seeking but it is not zinc plated and is 5 inches long.
view full answer... - Securing Axle U-Bolts With LoctiteThough it is not completely necessary to use something like Loctite's Threadlocker # LT37420, there wouldn't be any adverse affects either. Most U-Bolt kits do come with lock nuts making them more secure than standard nuts, but you can definitely apply # LT37420 to completely secure their purchase on the U-Bolts.
view full answer... - Need Replacement Square U-Bolt for 1-1/2 Inch AxleFor a replacement U-Bolt closest to your measurements, I have the Replacement U-Bolt with Nuts, part # 1753223, which is for 1-1/2 inch wide, square axles. We also sell these U-Bolts in a pair, part # SP01-120. The Replacement U-Bolt, part # 1753223, will work great with your 1-1/2 Inch, 1800 pound capacity axle. U-Bolts do not typically carry a weight rating.
view full answer... - Replacement For Square U-Bolt 1-5/8" x 3/8" x 4" LongThe closest U-Bolts we have are the following. 1-1/2" x 1/2" x 5" # 1753223 1-3/4" x 9/16" x 5" # 175130 If neither of these will work for your application you can check your local hardware store.
view full answer... - Determine Square Axle CapacitySquare axle capacities are pretty hard to determine. Unlike round axles, they do not have set capacities based on their dimensions. We have no information for the bearing numbers you listed. But what you can do is give me some exact measurements of your spindle and we should be able to see if there is a hub we carry that would fit so that you could at least get a ballpark on your capacity. I need the dimensions of where the bearings and seal ride. You might be able to contact the original...
view full answer...
- U-Bolt Mounting Plate to Use with 1-1/2 inch U-Bolts # 1753223The u-bolt plate part # 115983 is the correct size for use with the 1-1/2 inch u-bolts part # 1753223.
view full answer... - U-Bolt Dimension Measured on Bolt CentersI pulled a Replacement U-Bolt with Nuts # 1753223 from our warehouse to measure the distance between the U-bolts measured on center and found that dimension to be right at 2 inches. Check out the video I attached that shows me taking this measurement with a dial caliper.
view full answer...
Do you have a question about this Trailer Suspension Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Installed by:
Cole B
Updated by:
Mike S
Updated by:
Eric H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Gerald
11/24/2023
Trailer still holding up.