Deep V Keel Roller Assembly for Boat Trailers

Question:

Hello, I have a 2008 Parker 2320 that is sitting on a loadmaster trailer. The trailer only has two bunks and the keel of the boat sits on a plastic support on one of the middle cross members. I would like to add two keel bunks to help lift up the boat off the frame and stop damaging the keel. Could you guide me through which parts I would need to get this done? Thanks in advance.

asked by: Jose A

Expert Reply:

I would be happy to help you it sounds like you need another keel roller assembly for your loadmaster trailer and a couple of bunk boards. I recommend the CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 10" item # CE10404G. This has a 10-inch, black rubber keel roller and a galvanized steel panel bracket with slotted mounting holes for adjustability. You will also need a pair of CE Smith Carpeted Bunk Boards for Boat Trailers item # CE27845. These are 7' long and can be cut down to size depending on what size trailer you have.

I have linked our entire selection of bunk boards if you would like a smaller size.

expert reply by: Jerred H