Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This "Y" fitting is perfect for an RV with two separate holding tanks or for connecting 2 hoses to the same dump station. Slide each end into a sewer hose or another adapter and secure with a clamp (sold separately) for leak-proof results.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Camco RV sewer hose Y fitting, part number CAM39272. This why fitting in design, if your camper has 2 waste tanks, you'll take a hose from one waste tank to go into one section and the other hose of your waste tank to go in the other section. This is going to allow both tanks to come together and drain out of one hose into the dump station. It's made of a heavy duty plastic construction. It's going to withstand use over the years. We'll just go ahead and hook up a hose to it. We have the Camco Twist-It hose clamps and then we're going to be using the Rhino Extreme sewer house. We just attach one end to one part of the Y. You can see we have one hose coming from one of our waste tanks and we have other other hose coming from our second waste tank.
Again, we're going to be using the Camco Twist-It sewer house clamps . Which we'll take the other hose and insert it onto the other section of the Y adapter. We'll use the thumb tabs, tighten them down. These Twist-it clamps are really nice because you don't need a screwdriver to tighten them down; no tools needed. Now with both of our hoses attached, we have one hose coming from each of our waste tanks coming together to come out of one house which should attach here, allowing you to drain both tanks at the same time directly into the dump station or into a Camco Tote-N-Stor. With that, that will complete today's review of the Camco RV sewer hose Y fitting, part number CAM39272. .
Average Customer Rating: 4.8 out of 5 stars (10 Customer Reviews)
This "Y" fitting is perfect for an RV with two separate holding tanks or for connecting 2 hoses to the same dump station. Slide each end into a sewer hose or another adapter and secure with a clamp (sold separately) for leak-proof results.Searched on the internet and found this to be the best price with etrailer so gave them a try. Best choice I made.....super fast shipping...delivered right on time...and product exactly as described!!!
The "Y " ends need to be tapered slightly for fitting into hoses. Not yo much where it would be lose but enough for smooth fitting.Had to cut slits on my hose for this to work.
Have two 3" outlets on this camper, so this "y" will work just fine. Thank you!
Bob L.
8/11/2017
Did not use it!
EVERYTHING WAS GREAT !!!!!!!!!!!!!!!! THANK YOU E-TRAILER
Product was as described good material. ..
Got the part fast so I could get project done.
On time and worked great for I used it for
Worked perfectly
Outstanding service.
Do you have a question about this RV Sewer Hose Fitting?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Don C.
2/13/2019
It perfect with no issues