LaSalle Bristol Adapter for RV Sink Strainer - ABS Plastic - 1-1/2"

Video Transcript for Review of LaSalle Bristol RV Sink Parts - Drain to Pipe Adapter 1-1/2 Inch - 3446332117

Hey everyone. I'm Ellen here at etrailer.com and today we're going to be taking a look at the LaSalle Bristol adapter for your RV sink. So this is going to let you connect to your RV sink drain and then also connect into your actual drainage system. So it goes from a threaded connection to just that straight pipe connection so you can get everything melded together. So you can have your new drain system for your RV sink.This is just going to be a PVC construction, should be strong enough to be up to the task for use in your RV. It connects to a one and a half inch hub, so it's going to slide onto your drain pipe.

So that's going to be a one and a half inch diameter there. And then the threaded side will fit into the FPT end of your drain. It is designed to work with a couple of LaSalle Bristol drains, like this one here. It's going to be one of the drains that's listed on the product page here at etrailer.com, so that just threads in there and provides that connection. So normally your drains have that threaded end, so this is that place for those to attach into.

And then that connection actually goes into the pipe. Again, one and a half inch inner diameter on that pipe, so it'll fit over your one and a half inch pipes.Pretty simple to use, not a bad idea to get some abs solvent cement to connect this and make sure that everything's nice and tight. You can find that again as a related product on the product page here at etrailer.com. So if you don't already have some, that's going to help to make sure that everything welds together and stays connected even while you're out on the road. That's going to do it for our look at the LaSalle Bristol adapter for your RV sink.

Thanks for watching.