Summer Starts Here - Save up to 70%
Exterior evacuation drain trap allows you to drain your sink or shower directly to the exterior of your RV. Standard 3/4" MPT water hose connection and 1-3/4" standard strainer connection.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everyone. I'm Ellen here at etrailer.com. Today we're taking a look at the exterior evacuation drain trap. This is designed to let you drain your sink or your shower to an external tank, or just outside to a hose on your RV. If you don't want to have your water draining into an onboard water tank, or you've not set up for that, this is going to be that part that you need to get everything drained out to an external location.So it's going to have our fitting here. This is going to be a barb fitting that measures three quarters of an inch in diameter, and then our standard strainer connection fits a one and three quarter inch diameter, that's going to be the inside measurement of those threads there.
There are two mounting locations on either side, or one mounting location on either side. It's got these little nodes coming off of it, and this is also going to be sort of a check valve to make sure that water doesn't come back up.As far as the overall length is about 3 1/2" Long. The top here is about 2 3/4" in diameter. Our fitting comes off by about a 1/2", so it's going to be, or it's going to be 3/4", so it's about 3 1/2" long overall. Now you're seeing our fitting about 3/8" there.
That's pretty much going to do it for our look at the exterior evacuation drain trap. If you need any other replacement parts or accessories for your RV, you can find those right here at etrailer.com so definitely check those out. Thanks for watching and we'll see you next time.
Average Customer Rating: 5.0 out of 5 stars (9 Customer Reviews)
Exterior evacuation drain trap allows you to drain your sink or shower directly to the exterior of your RV. Standard 3/4" MPT water hose connection and 1-3/4" standard strainer connection.
I used this drain trap to replace the identical trap on my new popup camper sink as the original unit leaked. The actual problem was that the original hose clamp was tightened too tight and deformed the discharge tube. I also have an additional trap for backup.
It's exactly the part i needed, and many thanks to your crew for helping me get the correct part.
Prompt delivery and priced below any other websites.
Oder shipped and arrived in a timely ma nner.
Love it!
Do you have a question about this RV Sewer Hose Fitting?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.