Universal Wiring Adapter for Curt Trailer Brake Controllers
(435 reviews)
Price: $8.90
In Stock
Universal Wiring Adapter for Curt Trailer Brake Controllers
Item # C51515
Retail:$25.91
Our Price: $8.90
You Save: 66%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (435)
- Q & A (0)
- Photos
CURT Accessories and Parts - C51515
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- CURT
- Universal
This wiring adapter is designed for vehicles that do not come equipped with a factory brake control wiring harness port. One end plugs into your Curt trailer brake controller while the other end splices into your vehicle's wiring.
Features:
- Universal wiring adapter eases installation of your electric trailer brake controller
- No need to wire brake controller directly to your vehicle
- Wire end splices into your vehicle's wiring
- Use on a vehicle that does not have a factory tow package or on one that has a brake control harness but is not equipped with a plug-in port
- Connector end joins with the plug on your electric brake controller
- Compatible with time-delayed and proportional brake controllers from Curt
- Simple to plug and unplug control for removal
- 2' Long, 12-gauge wires have protective covering to deter damage
- Limited 1-year warranty
Installation of Curt Brake Controller Adapter
To install your Curt electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. Usually when this is done, a port is installed at your dash so that you can easily plug in a brake controller. However, if no port is present, you will have to splice into your wiring.
With this universal adapter, you can install your Curt brake controller without having to wire the controller directly to your vehicle. If your vehicle has a factory tow package, just splice the pigtail end of the adapter into your vehicle's factory brake control harness wiring, and then plug the other end of the adapter into the controller. If your vehicle doesn't have a factory tow package, you'll have to hardwire the pigtail end of the adapter into your vehicle's wiring. Because only the adapter is hardwired to your vehicle, you can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
If your vehicle is not equipped with a factory tow package, you will need to purchase additional equipment to ensure that the signals from your brake controller are sent to your trailer's brakes. We recommend etrailer.com's exclusive 7- and 4-way brake control installation kit (ETBC7 - sold separately).
51515 Curt Universal Quick Plug Brake Control Adaptor Harness with Pigtail
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Universal Wiring Adapter for Curt Trailer Brake Controllers - C51515
Average Customer Rating: 4.7 out of 5 stars (435 Customer Reviews)
This wiring adapter is designed for vehicles that do not come equipped with a factory brake control wiring harness port. One end plugs into your Curt trailer brake controller while the other end splices into your vehicle's wiring.by: Chris 04/25/2024
I needed a trailer brake wire wire harness and connector. David verified the correct parts and I received it in a few days. Thanks
by: RenCan7302/09/2024
Not too difficult to install, but I would recommend using a car lift so you don't have to work from your back (review includes wiring harness and 4-7 Pole Adapter)
by: Tom C.03/10/2014
I have the Dodge Ram Truck 94 model with factory wire 7 connector plug. This is the truck that many people can't find the blue wire under the dash. 94 model didn't come with a factory wire plug under the dash like later models have. I found the wire tape to the main wiring harness about two inches from the fire wall to the right of the emergency brake paddle. This harness worked great
by: Frank S02/14/2014
this went into my VW Touareg which requires the relay modification described in the Technical Bulletin. Because ground and +12V is already present in the harness, instead of running additional cables, I soldered the relay right into the cable, making it a clean plug and play setup which is 100% removable. I also bought the VW housing and wire kit to complete the install
by: Mike10/14/2022
Worked perfectly with the Curt Spectrum.
by: Kent E.06/05/2016
Wiring up a brake controller can be tricky. Routing the wire from the hitch to the firewall and finding the right wire on the brake are the hardest part, but etrailer will do their best to help.
Consider running the wire inside the car along the door bottom just under the carpet. This avoids problems with the tie-wraps under the car -- there just isn't anywhere to tie wrap under the middle of the car. Use "loom clamps" ordered separately to solve this problem, if you go under the car.
To find the right brake wire without cutting insulation, use the fish wire from the hitch install to contact the end of the wire inside the connector (from the back). Then touch the fish wire with the continuity tester and apply the brake pedal. My brake had a four wire connector and I found the right one on the second try.
If you find a hole in the firewall with a rubber plug in it, don't discard the plug. Make a short slice in it with a razor blade and push the wires through. You may have to work the wires around to get them through the carpet. Be patient.
Be sure to watch all the videos and allow plenty of time, taking a break before you tackle the hard parts. Rest assured that doing it yourself is better than allowing UHaul to cut corners and charge you labor. :-)
If you are doing the hitch install and four-wire harness, those are much easier. If you are installing the hitch alone, be sure to have a magnet wand for when you push the bolt up into the frame rail. If I had it to do again, I would use a little electrical tape to hold the bolts down so a slight bump wouldn't knock them up.
by: BiscuitsNGravy10/21/2013
I own a 2008 Chevy Silverado. I ordered the brake controller - C51515 and the universal wiring adapter on Friday and received it on Tuesday. My friend who is a mechanic installed it in about an hour on Wednesday. I towed my camper trailer to Lincoln, NE (about a 5 hour trip) on Thursday and returned on Sunday. After reading the settings instructions, all stops were made smooth and firm. Etrailer.com was great and the Curt Trailer Brake Controller is excellent!
Biscuitsngravy
10/21/2014
I have enjoyed the use of the electric brake controller. The stops are always safe and smooth. Im glad I got it for my truck and Ive never had a problem with it. I just need to get out and use my camper more! The initial contact with etrailer.com was very favorable and I will do business with them again when I need something for my trailers or tow vehicles.
by: Howard S.04/06/2017
I bought a 7 pin trailer wiring/brake connection for my Dodge pickup. I installed it myself, the instructions were absolutely clear and correct. It was an easy installation. In the year since, I've pulled my trailer (tandem axle, 16') many times. The brakes continue to work perfectly as well as the lights. The connectors are solid, all work just like new. I recommend Etrailer parts and their people 100%!
Howard S.
4/6/2018
Still working great. Not any problems. A great product
by: Peter 06/22/2021
This is a "must have" if your vehicle did not come with a "tow package". If your vehicle does have a tow package try to get the correct wiring adapter and you can just plug it in without having to make wiring connections.
Peter
6/23/2022
So far, so good!
by: Kenneth03/21/2024
Worked like they said it would
by: John 10/11/2022
This was a quick and simple installation. The flat connector cover does not stay on and needs to be redesigned. Does not have enough friction. Generous squirts of Fluid Film keep it from corroding,
The round connector cover is fine.
by: Richard 12/02/2022
I can't tell you how much time you saved me. I need a clean wiring no junk connection you hit it out of the park plug and play wires I love it. And the price was cheaper than the local trailer shop that tried to they would have done it
better I seen their work thank you again for the great service and fast shipping.
by: Anna09/29/2022
I had this professionally installed at the trailer rental place so I can't comment on installation but the technician indicated it was fairly simple. It works great!
by: Michael11/04/2021
The Curt Spectrum Brake Controller works great for my 2008 Toyota Highlander. I mounted it on the front of the console armrest compartment behind the cup holders (facing forward). I was easily able to route the wiring out the bottom of the console and access the module under the drivers seat (be very careful installing the pins into the clip, they are very fragile). Then I ran the wires under the bottom edge of the console and out through the fire wall (Be very careful drilling your hole through the firewall. I caused some damage I had to have repaired}.
Also, the help I had from Yolanda, making sure the kits I needed were compatible, was extremely important because I was leaving for a cross country trip later that week. She was wonderful and everything worked great for my trip.
Thank you etrailer. I'm a regular customer and will remain so.
by: Tyrone 02/12/2024
Worked great
by: Lamar11/29/2023
Part functioned as required
by: Earnest 09/15/2023
Easy installation.
by: Rick03/25/2022
Awesome customer service!! Installed trailer brake control on my 2018 Chevy Colorado . Install was a breeze, control knob is small and out of the way and it works perfectly!
by: Ted07/03/2014
I purchased the wiring harness to aid with hooking up the Curt Brake Controller I had previously purchased. The shipment was fast. The product was perfect. The on-line installation video was perfect and allowed me to complete the installation like a professional. I have never purchased anything from etrailer.com .... but should I ever need anything in the future, they will be my first choice.
Ted
7/3/2015
Perfectly. No issues at all with wiring or controller.
by: David 03/30/2021
Worked like it should. You might leave the sleeve uninstalled on the 4 wires for the installer to fit. I only needed it for the 2 wires going through the firewall. It was not useful for the ground and switch wire.
by: charlie B06/10/2015
Excellent web site with great installation videos and application info.
Easy ordering with good feedback notifications and prompt delivery.
Trailer Brake Controller works very well and as described on your web site. I will do business with you again and recommend you to my auto club.
Charles B.
6/9/2016
Worked fine, but sold vehicle 6 months ago.
by: Andy02/05/2021
Spoke with etrailer on the phone, they helped me get the right hitch for my car. The hitch was good quality, and their install video really helped.
They shipped promptly and everything arrived in just a few days.
Great experience.
by: Drew V.10/10/2016
Made hooking up the Curt Discovery Trailer Brake Controller to our non-wired 1982 GMC 1-ton (without voiding the controller warranty) a snap.
Drew V.
10/10/2017
No issues, completely satisfied!
by: Paul 05/24/2023
The right product for the job...if e-trailer makes it any easier their competitors will be out of business!
25
435
Show More Reviews
See what our Experts say about this CURT Accessories and Parts
- Troubleshooting Curt Brake Controller with Short Error When Override is SlidSounds like you have a wiring short most likely due to a wiring issue where the brake controller is connected to your truck. I would suspect there's some exposed wire that is creating a short that you'd want to use some electrical tape to insulate and fix. The other place to check is the wiring behind your trailer wiring connectors for shorts. If not that it's the controller that has an internal short which is unfortunately not uncommon for Curt brake controllers. The Prodigy P2 # 90885...
view full answer... - Recommended Receiver Hitch and Wiring for 2013 Chrysler Town and Country Towing a TrailerFrom information available to me online, your 2013 Chrysler Town and Country has a maximum towing capacity of 3,600 lbs. You will want to verify this against the specs in your vehicle specific owners manual. I will assume this is a camping trailer that you list at the 3,500 lbs. and it is a max weight, not its dry/unloaded weight. So, yes it appears that although you will be on the upper edge of your vehicles towing abilities, you can do so. I recommend the etrailer Trailer Hitch Receiver,...
view full answer... - Comparing Curt Echo C79DR and C27JR for 2019 Porsche CayenneThat is correct, both the # C27JR and the # C79DR are the same Curt Echo with a slightly different design and connection/mounting position. Both use the Curt Echo app on your phone and are compatible with the manual override button # C83HR if you would prefer to have a physical button in the cab. They came out about the same time, choosing between the two comes down to your preference. The # C27JR mounts under your dash as you said and will also require the # C51515 wiring harness. This...
view full answer... - Parts Needed For 7-Way on 2022 Subaru Outback For Brake ControllerWe can get your 2022 Subaru Outback set up with a 7-way so you can use a brake controller to tow your camper, and there are just a few parts you're going to need. First is the 4-flat, which will activate your trailer's lighting functions, and you'll then plug that into a 7-way which has the remaining functions to use a brake controller. So exactly what you'll need for your '22 Outback is the following: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467 - Universal...
view full answer... - Brake Controller and Installation Recommendation for a 2013 Chevy TahoeYes, the Curt Venturer Brake Controller # C74VV and the install harness part # C51515 that you referenced are a confirmed fit for a brake controller for your 2013 Chevy Tahoe that has a factory 7-way trailer connector. No plug is present under the dash, but the needed wires are already run. You will connect the brake controller wiring with the vehicle wiring already present under the dash. See the attached install video.
view full answer... - Brake Controller Wiring Harness For 2008 Chevy SilveradoWhile there is a wiring harness for a brake controller on your 2008 Chevy Silverado, there is not a plug-in harness, it'll have to be hardwired. The wires are already run though, and I have added a link below to a help article which explains how. The correct wiring harness depends on the brake controller you want, and I recommend going with Curt, for which you'll need the Wiring Adapter for Curt Trailer Brake Controllers # C51515. This will allow you to install the Curt TriFlex NEXT Trailer...
view full answer... - How to Tow a Trailer with Brakes with a 1995 Chevrolet Impala SSThe Curt Trailer Hitch Receiver part # C12009 is a confirmed fit for your 1995 Chevrolet Impala SS and will work well for you. In order to tow a trailer with brakes you will also need to use both the Curt T-Connector Vehicle Wiring Harness part # C55347 and the Universal Installation Kit for Trailer Brake Controllers part # ETBC7. If you need a brake controller I recommend the Curt TriFlex Trailer Brake Controller part # C24VV with the Universal Wiring Adapter part # C51515. The only other...
view full answer... - Parts Needed to Add 7-Way to 2012 Mercedes Sprinter For Brake ControllerYou are 100 percent correct with what you need to add a brake controller to your 2012 Mercedes-Benz Sprinter with the 4-way and then 7-way: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118650 - Universal Installation Kit for Trailer Brake Controller # ETBC7 You will first install the 4-flat, which will activate your trailer's lighting functions, and you'll then plug that into the 7-way that comes with the # ETBC7, which also gives you the wiring, circuit breakers,...
view full answer... - How to Install Curt Spectrum Brake Controller on 2011 GMC Yukon with Factory 7-Way ConnectorWhile there isn't a direct plug for installing the Curt Spectrum Trailer Brake Controller # C51170, there are blunt cut wires under the driver's side dash of your 2011 GMC Yukon that you will connect the Adapter # C51515 to so that connecting the Spectrum is more of a plug-and-play installation. According to the online owner's manual for your Yukon you will connect the following wires from the adapter to the following wires on your Yukon: Blue - Dark Blue Black - Red/Black White - White Red...
view full answer... - Curt Wiring Adapter For A Brake Controller Compatible With Vehicles Without A Factory Wiring PlugYes we do, The Universal Wiring Adapter for Curt Trailer Brake Controllers, part # C51515, is designed to work with Curt Trailer Brake Controllers on vehicles without a factory brake control wiring harness. These wires will have to be spliced into your vehicle's existing wiring, so there should be no issue with your 2004 Toyota Tacoma. I have included a product description link, a video installation link, and a video review link below.
view full answer... - Recommendations For Adding A Brake Controller To A 2020 Hyundai PalisadeI will start by saying the Curt # C13427 hitch and the Curt # CU94FR wiring harness are definitely fits for your vehicle, so they are definitely a good place to start. However, getting the Curt Spectrum Trailer Brake Controller # C51170 up and running properly will require more than just 7 Way plug. The Curt 7 Way # C57672 will just piggyback off the 4 Flat and will not have any other function until more wire and circuit breakers are run. With that said, I recommend changing the Curt #...
view full answer... - Will Tekonsha Wiring Harness # 22114 Work with a Curt Brake Controller and 2015 Ford TransitTrailer wiring harness # 22114 will fit your 2015 Ford Transit and it will work with your Curt brake controller. The brake controller will be hardwired in since the vehicle does not have a factory tow package. So instead of using the harness that comes with the kit to hardwire in the controller you would need the Curt version, # C51515, if you don't already have it. I have included some links that will help with the installation. You will be looking at the parts relating to hardwiring...
view full answer... - Trailer Hitch, Wiring, and Brake Controller for a 2011 Ford Explorer Without OEM Tow PackageThe Curt trailer hitch # C13386 is the most popular hitch for your 2011 Ford Explorer so you are off to a good start. You mentioned that you already have different ball mounts and likely also have properly sized balls to tow the trailer so I can skip that part. The trailer wiring harness # C59236 that you have selected is also a fit but this is a universal kit that requires cutting and splicing into the vehicle tail light wiring. If you want to avoid that then I recommend a T-connector,...
view full answer... - Recommended Brake Controller Wiring Harness For 2013 Toyota TundraIf your 2013 Toyota Tundra has the factory 7-way installed, the Curt Custom Wiring Adapter, part # C51362 will be what you need to connect the Curt Discovery Trailer Brake Controller, part # C84VV. If you have a 4-way connector installed on your Tundra, part # C51515 is what you need. This harness is used on a vehicle that does not have a factory tow package or on one that has a brake control harness but is not equipped with a plug-in port. If your vehicle doesn't have a factory tow package,...
view full answer... - Will Curt Brake Controller Work With 2014 Toyota Sienna MinivanThe Curt TriFlex Trailer Brake Controller, part # C24VVis a proportional brake controller and will work well for you. Since we do not have a plug-in adapter for this brake controller for your Sienna, you will also need the Universal Wiring Adapter, part # C51515. One end of this adapter plugs into the back of your brake controller and the other end is spliced into the vehicle wiring. If you do not have a 7-way connector at the rear of your Sienna to use for towing a trailer, you will...
view full answer... - Does Curt TriFlex Plug Into 2007 Chevy TrailBlazerEven if your 2007 Chevy TrailBlazer has a factory 7-way there is not a plug underneath the dash for a trailer brake controller such as the Curt Spectrum # C51170; you will need to hardwire it with Wiring Adapter # C51515 though the wires will already be run if you have the factory 7-way (you should already have a factory 4-way). If you do not have the factory 7-way you will need to add the Universal Installation Kit for Trailer Brake Controllers # ETBC7. I've added a link on installation...
view full answer... - Parts Needed to Install Brake Controller on 2021 Subaru Outback XT with 4 Way Flat ConnectorBecause your 2021 Subaru Outback has a 4 way flat already installed, all you'll need is the # ETBC7 for a 7-way and the Curt Wiring Adapter # C51515. With that you'll be able to complete the installation of the Curt Discovery Brake Controller # C84VV.
view full answer... - Installing Curt Brake Controller on 2007 Chevy Silverado New BodyIt sounds like you have the correct harness for your Curt Venturer Brake Controller # C74VV and your 2007 Chevy Silverado, which is the Wiring Adapter Harness # C51515. This particular harness does feature a plug on one end that connects to the brake controller itself but as you mentioned the other end features bare wires. This is because the 2007 Chevy Silverado should have bare brake controller wiring, not a plug, under the dash that these wires will connect to. It's possible that the...
view full answer...
- Is Custom Brake Controller Harness Available For 2008 Ford EdgeThe Curt TriFlex Brake Controller, part # C24VV, is a proportional brake controller that activates your trailer brakes in direct proportion to the brake action on your Edge. The Curt Custom Wiring Adapter, part # C51322, you mentioned, is not designed as a fit for your 2008 Ford Edge. You will need part # C51515, which will need to be hardwired into your Edge wiring. If you do not have a 7-way connector at the rear of your Edge, I recommend part # ETBC7. This plugs into your 4-way connector...
view full answer... - Correct Harness for Curt Echo Under-Dash Trailer Brake Controller On 2017 Chevy ColoradoIn order to install the Curt Echo Under-Dash Trailer Brake Controller part # C27JR on a 2017 Chevrolet Colorado you'll need the Universal Wiring Adapter for Curt Trailer Brake Controllers part # C51515. There is no plug present under the dash, but the needed wires are already run. You will connect the brake controller wiring with the vehicle wiring already present under the dash. I have also attached a review video I did on this brake controller below.
view full answer... - Parts Needed to Add Brake Controller to 2013 Toyota HighlanderWe don't have that saved, but do have all the parts needed for your to add a brake controller to your 2013 Toyota Highlander. For those parts, as well as a controller that is a good quality but not top of the line, here's what you'll need: - Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56217 - Universal Installation Kit for Trailer Brake Controller # ETBC7 - Curt Assure Trailer Brake Controller # C49UR - Curt Wiring Adapter # C51515 You will first install...
view full answer... - Curt Triflex Brake Controller and Wiring Adapter Recommendation for a 2006 Jeep Grand CherokeeThe easiest way to order the Curt Triflex part # C24VV that you referenced and get the correct wiring adapter part # C51515 would be to just order both the part numbers separately. If you are on the multi-product page that shows both part numbers listed next to each other when you hit add to cart both part numbers will be in the cart. These two parts would work well in your 2006 Jeep Grand Cherokee, I attached an install video for you to check out also.
view full answer... - Can 2022 Toyota Highlander Hybrid Have Brake Controller InstalledYour 2022 Toyota Highlander hybrid can have a brake controller installed, and there is only one slight difference in the install between it and the non-hybrid. The only difference is on your '22 Highlander Hybrid, you should not disconnect the brake light switch unless the battery is disconnected or ignition is in the off position or else you may set off a code in the computer system that limits the vehicle's motion. Apart from that, the install will be the same, and you will need a 4-flat...
view full answer... - Wiring Harness for Curt Spectrum Trailer Brake Controller on 2016 Jeep Wrangler UnlimitedThe correct adapter for the Curt Spectrum # C51170 trailer brake controller on your 2016 Jeep Wrangler Unlimited is Wiring Adapter for Curt Trailer Brake Controllers # C51515. One end of this adapter will plug into your Spectrum brake controller and the other end will splice into your Jeep's brake controller wiring; you can use Butt Connectors # 05731-5 to help make this connection. I have added a link to a video review of Adapter # C51515 for you to check out as well.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Leah B
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Andrew K
Video by:
Joshua S
Written by:
Lindsey S
Installed by:
Jeff D
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Brent H
Test Fit:
David F
Test Fit:
Ryan G
Video Edited:
Andrew L
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kent E.
1/23/2018
Ive not had any trouble with the hitch or the brake controller. I can tow my tear trailer anywhere I want and the hitch protects my mufflers from damage when I go offroad. Nice extra benefit.