Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
(222 reviews)
Price: $13.94
In Stock
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
Item # C51362
Retail:$29.21
Our Price: $13.94
You Save: 52%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (222)
- Q & A (0)
- Photos
2012 Toyota Tundra - Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- CURT
- Vehicle Specific
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your 's dash.
Features:
- Plug-in wiring adapter allows for quick, simple installation of your electric trailer brake controller
- No cutting or splicing required
- Custom connector end plugs into the built-in port beneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible with time-delayed and proportional brake controllers from Curt
- Brake controller must have built-in plug for adapter to connect - will not work on controllers with pigtail wiring harnesses
- 2' Long, 12-gauge wires have protective covering to deter damage
- Limited 1-year warranty
Installation of Curt Brake Controller Adapter
To install your Curt electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.
This adapter plugs into the port on your vehicle's built-in brake control wiring harness. The harness is located underneath the dash, to the left of the steering column, and it is taped to another harness near the emergency brake pedal.
No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
51362 Curt Quick Plug Brake Control Adaptor Harness
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Defective
- Alternate product found
Customer Reviews
Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In - C51362
Average Customer Rating: 4.8 out of 5 stars (222 Customer Reviews)
Install your Curt electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.by: James 03/25/2024
Toyota
initially had trouble finding the Toyota connector since there was an unidentified cover on it but worked well after locating it
by: Christopher04/29/2023
I’ve owned 5 brake controllers. This is the only one I’ve disliked. This controller has non digital controls (should have been my first clue it might not be good) it just has two slide controls. Problem is two things, the slide controls themselves are black, the same color as the case on the unit and you can’t even see the position of the slide controls because they blend in with the color of the case. It’s impossible to tell if they’re turned down all the way, turned up all the way, in the middle? The other problem is that the slides are so imprecise, They slide way too easily and there’s no detents and I found if you even bump the unit slightly or are going over rough roads the slide switches migrate. I was towing a couple of weeks ago and I thought I had the switches dialed in as good as I could, I was on some rough roads, due to road construction in the area, the output switch vibrated over to maximum and the next time I hit the brakes , the trailer locked up completely. So I had to turn it off until I could get to the next town where there was a parking lot I could readjust. I’m definitely getting rid of this thing and I definitely recommend you do not buy it. Buy something with digital output controls so you know precisely where the settings are. I firmly believe this controller is dangerous and I know if I keep using it I’m going to get an accident.
by: Bruce D.08/10/2020
Using the Curt wiring adapter, installing the Curt TriFlex brake control in my 2006 Toyota Tundra was simple after watching your video. Very pleased with everything I ordered from e trailer.
by: Paul02/23/2024
The package was shipped and received 2 days early. It was delivered in perfect shape. I think I will be happy with this brake controller!
by: Tom and Anita09/19/2016
2010 Toyota Tundra
Yes I received my order and installed the brake controller. All seems to be
fine, although I have yet to tow with it yet. Here are a couple photos of
the installation in my 2010 Toyota Tundra.
by: Steve 05/27/2023
Using the harness is the best and easiest way to install a brake controller. The warranty on the controller is still valid since no wires have to be cut.
by: David10/12/2023
Made the install of the brake controller straight forward.
by: Jason07/16/2023
The wiring adapter was easy to connect and tuck up under the steering wheel to attach to the brake controller.
by: Glenn08/24/2020
2011 Toyota Sequoia
Installed on 2011 Toyota Sequoia - Plug and play as advertised.
by: Steve 02/04/2024
Pending installation…
by: Ed D01/19/2015
2010 Toyota Tundra
Well that was the easiest thing I've ever done on a vehicle. The info on the etrailer site was instrumental in this being a quick plug-n-play mount of the Curt brake controller. I watched the two minute video and 10 minutes later I had a new brake controller installed in my 2010 Tundra.
by: Jason08/20/2022
This wiring adapter fit perfect between the Curt Adventurer brake controller and the pigtail harness in my '06 Tundra. Remove the truck's driver side kick panel, cut the truck connector loose from where it was secured, and plug this adapter into both the truck and the brake controller. Plug and play.
by: Vincent03/17/2024
Fit like a glove
by: Andrew05/15/2017
2012 Toyota Tundra
I installed the Curt TriFlex Brake Controller C51140 along with Wiring Adapter C51362 on my 2012 Tundra. Was super easy. Thanks for video.
Andrew
5/15/2018
Perfect. No issues at all.
by: Wade V07/28/2015
2008 Toyota Tacoma
Teconsha P3 is an excellent brake controller.
Even better was the customer service from etrailer....I had an issue with another model, called etrailer, and they made it right. No questions asked. Will definitely shop with them again. Thanks, etrailer! -wade
Wade V.
8/5/2016
Love the Tekonsha. Will not buy another Curt. Thanks for asking. And e-trailer was great, especially dealing with the dysfunctional Curt. Thanks.
by: Ethan 03/15/2024
2005 Toyota Sequoia
Great service!
by: Jim W05/27/2021
Custom cable made my brake controller installation a simple project. Fit perfectly and took all stress out of the job. I would buy again without hesitation.
Jim W.
5/27/2022
Yup, still working as supposed to. No complaints. Well worth the money.
by: John06/20/2019
The adapter for connecting the trailer brake controller arrived earlier than scheduled. It enabled a quick and easy plug and play connection of the controller to the vehicle.
John
6/21/2020
Worked perfectly - plug and play
by: Kirk Jones07/04/2014
2012 Toyota Tundra
Fast shipping! Great product for this price. My 2012 Tundra has airbag underneath steering column so I mounted brake controller just left of area.....perfect! Works like it came stock.
Kirk J.
7/4/2015
Outstandingly
by: Pat M11/18/2016
Etrailers catalogue provided a complete & accurate description of the 8 items purchased. Placing the order by phone was fast & efficient. Items arrived within 4 working days, no tax no shipping charge. Professional all around.
Pat M.
11/21/2017
The EOH braking system works perfectly. You are my supplier of choice if when I need additional trailer parts on the future.
by: J07/01/2021
2017 Toyota 4Runner
Works well, easy to install. Sometimes the lights do not go off. I have to restart the 2017 4Runner and wait for them to go off.
by: Dave 09/21/2023
Perfect fit
by: Holly05/14/2022
Much smoother braking than the controller the RV dealer installed. Curt has excellent customer service.
by: Richard S.09/26/2017
Mating harness is perfect. Well made, quality connectors, proper length, time saver, priced right, a no brainer. Buy it!!!!!
Richard S.
9/27/2018
Great. This controller is very consistent in applying dependable braking while towing our travel trailer. After dozens of trips and thousands of miles the unit continues to do the job. Very satisfied.
by: Bill Huffman12/11/2013
2015 Toyota Tundra
This was my fourth order from etrailer and, as were the earlier ones, was delivered quickly. The instructions were clear and easy to follow and it took me only about 15 minutes to install the Curt Venturer Trailer Brake Controller with the wiring adapter for my 2012 Tundra. The white ground wire did not have to be grounded separately as it connects to a white ground wire in the adapter. I used Velcro on top of the controller and beneath the panel instead of the included bracket and can easily make adjustments without removing it. Adjusting the slides on top and the left side of the controller to get the desired braking action and a test drive to verify took another ten minutes. Great product.
25
222
Show More Reviews
See what our Experts say about this CURT Accessories and Parts
- Wiring Harness For Curt Spectrum Brake Controller On a 2013 Toyota TundraTo install the Curt Spectrum Trailer Brake Controller # C51170 in your 2013 Toyota Tundra you will require one of two wiring harnesses. First the Curt Custom Wiring Adapter # C51362 will allow you to plug directly into the wiring port on your Tundra if your truck came with the factory tow package. This white connector is located just above the kick panel on the drivers side below the dashboard. If you do not have the factory tow harness the Universal Wiring Adapter # C51515 will allow...
view full answer... - Plug and Play Wiring Adapter Needed For Hayes G2 Trailer Brake Controller On a 2017 Toyota 4RunnerYou will need the Curt Custom Wiring Adapter # C51362 for your 2017 Toyota 4Runner. The Hayes G2 trailer brake controller uses this style connector like their Energize III+ Trailer Brake Controller # HA81742B.
view full answer... - Which Install Harness to Install Curt Spectrum in 2003 Toyota SequoiaThe correct install harness is the part # C51362 to install the Curt Spectrum part # C51170 in your 2003 Toyota Sequoia.
view full answer... - Which Install Harness for TriFlex NEXT Brake Controller for 2019 Lexus LX 570Yes the Curt brake controller install harness part # C51362 does fit your 2019 Lexus LX 570 with the factory tow package and is the correct harness to use with theTriFlex NEXT # C24VV.
view full answer... - Correct Wiring Harness for Installing Curt C51170 Spectrum Brake Controller on 2013 Toyota TundraThe Curt # C51451 wiring harness isn't the correct harness for your 2013 Toyota Tundra. For your Tundra, you'll want to use # C51362 which is the correct harness for you truck. If you click the provided link, you can see an install video as well as a demonstration video showing how the Curt # C51170 Spectrum brake controller works.
view full answer... - Recommended Trailer Brake Controller Harness for 2008 Toyota Tundra and Curt Brake ControllerFor your 2008 Toyota Tundra, I recommend you swap out your 5 wire harness for the Curt Custom Wiring Adapter for Trailer Brake Controllers # C51362. This will allow you to simply plug in your Curt Venturer Trailer Brake Controller # C74VV. Your other option is to hardwire your controller. The Curt controller has the standard wiring of blue (brake controller output), black (power in), red (brake light switch cold side connection), and white (ground). You can use a circuit tester like...
view full answer... - Installation of RedarcTow-Pro Elite Trailer Brake Controller on 2006 Toyota TacomaWhen installing the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR on your 2006 Toyota Tacoma there will be a little bit of wiring required. In order to plug this brake controller into your factory wiring harness you need the Tekonsha Custom Wiring Adapter # C51362 along with the # 331-TPH-019. One end of this wiring harness will connect to the wires on your brake controller using the included butt connectors. Once this is connected to the wiring harness on the # RED44FR you...
view full answer...
- Brake Controller Wiring Adapter for a 2015 Toyota Tacoma with Factory 7-WayNo worries, the 5-wire harness will work just fine because the extra connection is for the illumination circuit and it's not needed. The Curt Discovery trailer brake controller # C84VV is a fit for your 2015 Toyota Tacoma and the direct fit pig tail adapter # C51362 you referenced is correct. You will simply plug the adapter # C51362 into your factory brake controller tow port and route the pigtail to the location of your choice so you can connect your brake controller.
view full answer...
- Will a Curt Brake Controller Wiring Harness Fit a Hayes Brake Controller on a 2012 Toyota TacomaCurt brake controller wiring harness # C51362 is only a fit for Curt brake controllers but you could use it if the Hayes controller you have has wires and a plug or just wires sticking out of the back. But if it just has a socket for a plug then you cannot. It looks like all of the current Hayes controllers, see link, do have wires and a plug sticking out of the back. What you would do is cut off the connector on the brake controller if present and remove the connector on the curt harness...
view full answer... - Where to Plug In Curt TriFlex NEXT Brake Controller on 2015 Toyota TacomaThanks for the purchase, and the brake controller port on your 2015 Toyota Tacoma will be up above and to the left of the emergency brake pedal for plugging in the Curt TriFlex NEXT Trailer Brake Controller # C24VV with the Plug-In Wiring Adapter # C51362. The plug is rectangular in shape, and I have added a couple of photos for you showing both the orientation of the plug-in port as well as what it looks like so you can get a good idea of what you are looking for.
view full answer...
- Adapter Needed to Install the TriFlex NEXT in a 2016 Toyota Sequoia with Factory 7-WayFor your 2016 Toyota Sequoia with the factory 7-Way installed you will need the Wiring Adapter # C51362 for the TriFlex NEXT # C24VV.
view full answer... - Is the Redarc Tow-Pro Elite Brake Controller Compatible with a 2017 Lexus GX 460 Factory Tow PackageThanks for reaching out, Neil! Yes, the Redarc Tow-Pro Elite Brake Controller # RED44FR is compatible with your 2017 Lexus GX 460. Since your vehicle has the factory tow package I recommend picking up the Curt Custom Wiring Adapter # C51362 and cutting off the black connector then splicing the universal wiring pigtail from the Redarc to the adapter so you get a plug-and-play setup.
view full answer... - What is Needed to Install Tekonsha Brake Controller in 2004 Toyota TundraIf your 2004 Toyota Tundra has a 7-way trailer wiring connector at the rear of it then to install a Tekonsha brake controller like the # 90885 would only require the custom install harness # 3040-P. If you do not have a 7-way then yes you would need the # ETBC7 to convert it to a 7-way and wire up the brake controller.
view full answer... - Parts Needed For Installing Curt TriFlex Trailer Brake Controller On a 2014 Toyota Tundra SR5Yes, the Curt TriFlex Trailer Brake Controller # C24VV and Wiring Adapter # C51362 will fit your 2014 Toyota Tundra SR5 as long as you have the factory 7-way. This will be a plug and play connection. If you do not have the factory 7-way you will need the Universal Installation Kit # ETBC7 and a Wiring Adapter # C51515. This kit will allow you to connect a 4-way flat connector to the 7-way and provides the wiring needed to wire in the adapter for the brake controller.
view full answer... - Will Curt Assure Brake Controller Be Smoother than Escort Brake ControllerThe Curt Assure brake controller part # C49UR when properly set up will be incredibly smooth unlike what you have now. This controller has an inertia sensor that can tell how hard you are applying the vehicle brakes and applies a proportionate amount of braking pressure on the trailer brakes. To install it in your 2012 Toyota Tacoma you'd just need the install harness part # C51362 which plugs in under the dash.
view full answer... - Trailer Brake Controller For 2010 Toyota Sequioa With Factory Tow PackageTo connect the Curt Spectrum Trailer Brake Controller # C51170 to your 2010 Toyota Sequoia with the factory tow package you will need the Curt Custom Wiring Adapter # C51362. This will allow you to plug into the factory connector located behind your dashboard making the controller a plug and play connection.
view full answer... - Parts Needed to Tow a Trailer with a 2004 Lexus GX 470 with Tow PackageIn regards to a 2004 Lexus GX 470, the factory tow package comes with most of the needed components. The only things you'll need to add to add really is a brake controller (if trailer has brakes), ball mount/hitch ball, and transmission cooler (recommended for high elevation towing). I recommend the Curt TriFlex Trailer Brake Controller part # C24VV with Curt Custom Wiring Adapter for Trailer Brake Controllers part # C51362 and then the etrailer Ball Mount Kit part # 989899. If you decide...
view full answer... - Install Harness for Curt Brake Controller Installed on 2014 Toyota TundraTo install a Curt brake controller like the Assure part # C49UR in your 2014 Toyota Tundra the correct install harness would be the part # C51362. I checked with them and was not able to find a different harness they recommended.
view full answer... - Where is Trailer Brake controller plug in on 2016 Toyota Land Cruiser?The brake control plug in for your 2016 Toyota Land Cruiser is underneath and to the left of the steering column, probably taped to another harness near the emergency brake pedal. That harness may also be tucked up and above the emergency brake pedal or behind the kick panel left of the pedal. That harness is what you will plug in Wiring Adapter # C51362 so you can use your Curt Spectrum Trailer Brake Controller # C51170.
view full answer... - Recommended Small Brake Controller for Limited Dash Space and Clean AppearanceWe don't have a brake controller that will fit the specific dimensions you gave, but I do have some options you should consider for small brake controllers. My favorite for a small dash is the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR. This is a small in dash or in console option for a clean look. You can use the harness # 3040-P with # 331-TPH-017. Another small dash option is the Curt Spectrum # C51170 with harness # C51362. This controller utilizes a small dash mounted...
view full answer... - Troubleshooting OL Code On Curt TriFlex Trailer Brake Controller W/ Trailer UnhookedSince your Curt TriFlex Trailer Brake Controller - 1 to 4 Axles - Proportional # C24VV you have is showing OL (overload) code even when trailer is unplugged that means that there is a short in the blue trailer brake output wire. I recommend cutting the blue wire of the # C51362 you have installed in the factory trailer brake port of your 2011 Tundra. If cutting the wire makes the code go away then there is a short somewhere between the trailer brake controller and the 7-way connector and...
view full answer...
- Wiring Harness to Connect Tekonsha Prodigy P3 to 2016 Toyota Sequoia with Tow PackageHey David, I have an alternative solution for you to connect your Tekonsha Prodigy P3 # 90195 brake controller to the tow package wiring on your 2016 Toyota Sequoia, but right now the parent company of Tekonsha was bought out and nobody knows what's going on with their parts so a lot of that stuff is in a state of "limbo" until they get their act together. What I recommend doing is buying the Curt version, part # C51362, and then cutting off the black connector and splicing those wires...
view full answer... - Brake Controller Wire Functions for a 2003 Toyota TundraIf your 2003 Toyota Tundra came with a factory installed 7-Way trailer connector and you are using Curt brake controller # C74VV then you will need the proper wiring harness to plug it into your truck, # C51362. If your truck did not come with factory 7-Way and you are trying to hardwire in the controller then the black wire is 12 volt power to the controller, white is the ground wire, red is input from the cold side of the brake switch, and blue is output to the trailer brakes. I have...
view full answer... - Parts Needed to Install Brake Controller on 2013 Toyota Tundra with Factory Tow PackageThe only thing you'll need to install the Curt # C24VV TriFlex brake controller on your 2013 Toyota Tundra is the # C51362 vehicle-specific brake controller wiring harness. As long as the vehicle is equipped with the factory tow package, you won't need anything else. The TriFlex controller includes the necessary bracketry and hardware for installation. The factory tow package connector that the harness plugs into is located to the left of the e-brake pedal, above the kick panel as shown...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Leah B
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Video by:
Joshua S
Video by:
Jonathan Y
Test Fit:
Nicholas E
Test Fit:
Conner L
Video Edited:
Sue W
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ed D.
1/19/2016
One year later and the install looks good and the Curt brake controller works as advertised, Im happy!