Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(72 reviews)
Price: $198.15
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13377
Retail:$299.95
Our Price: $198.15
You Save: $101.80
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (72)
- Q & A (0)
- Photos
CURT Trailer Hitch - C13377
- Class III
- 2 Inch Hitch
- 3500 lbs GTW
- Concealed Cross Tube
- CURT
- 525 lbs TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 525 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13377 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2017 - 2022 Nissan Rogue Sport
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13377
Average Customer Rating: 4.8 out of 5 stars (72 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Dennis 01/04/2024
2022 Nissan Rogue Sport
Haven't installed my hitch yet, but ordering was easy and it arrived very quickly.
by: Edward 07/28/2023
Nissan Rogue
The hitch was used to move a motorcycle from Ohio to Florida Hitch did a great job.2022 Rogue Sport
by: Thomas03/20/2022
I was excited to finally attempt to install my new hitch only to find out that my original concerns that it was not the right size, was actually correct, despite being told it was the correct hitch. I will change my review to more stars contingent on the manner that they replace it ASAP because I need it to move to my new home this week, by hooking a trailer to my car to move my belongings, etc. I am hoping it is handled expeditiously, otherwise I will request a refund and go elsewhere to have the correct one put on my vehicle.
by: Tina09/12/2019
Ordered a hitch, wiring and the ball to fit my Nissan Rogue. Everything as described. Price competitive if not lower. High quality and very fast shipping
by: Don07/03/2020
Just installed the hitch on my 2020 Nissan Rogue sport sv. Was simple to install. Direction were simple to follow. Product shipped and received on time. Towing seadoos with my rogue dog just got easy, thank you etrailer.com
by: Bruce05/02/2023
2022 Ford Transit Connect
Delivery is very unreliable. I received email notice that my full order was delivered, only to find out that only half was delivered. When I first called I was told that the order was put in the shipping bin for the mailboxes. Shipping bins are not 4 feet long but the help desk said it would fit in. Checked the delivery bin and no it was not. Called back to find out the order was NOT completely delivered and the other parts are in transit. Why was this not conveyed on the email stating that everything was delivered? Since i received the email of complete delivery I scheduled work to begin with these parts the next day only to find out it was not completely delivered. AUtomated system such as your can easily inform of partial delivery since that information is in you company system
by: Tim04/07/2023
2019 Nissan Rogue Sport
The shipping carrier originally lost some of the hardware but etrailer replaced the hardware in a timely manner making this an easy process.
by: Christopher06/02/2021
It was great the whole time we had the vehicle. We traded our Rogue for a Murano and have since then ordered a hitch from you for the Murano. It’s great too. We appreciate your follow up and fast service. And wonderful customer service as well. Thank you so much.
by: William B10/01/2019
Nissan Rogue
The hitch is great. It's not the first Curt product I've used. The big issue is with the car i mounted it on. The Nissan Rogue requires enlarging some holes in the under frame which is not simple. That said, the other Curt hitches I've installed have been straight forward and fairly simple for the novice to install. I can recommend their products as they are well constructed.
William B.
10/2/2020
As expected. Strong construction and fit like a charm. The installation was a bit tricky on the Nissan Rogue, but that was due to the vehicle manufacturers lack of foresight. We mostly used it for carrying a hitch mount cargo carrier, and it was the cats meow for that purpose. No complaints about the Curt product!
by: William 04/08/2023
Quality is very good and installation is straightforward and easy. The online video is extremely helpful.
by: Beverly09/28/2022
Well based on the purchase and speaking to a customer service rep for strainer, my parts where not the right ones. Had to order them from someone else. The electrical components did not connect to my turn signals and that is a major importance to a customer they should be able to click on. And the hitch sits way back into my bumper.
by: Winford08/01/2021
It has worked great carrying my bike on a bike rack.
Winford
8/2/2022
Still working very well
by: Fred 10/09/2022
2017 Nissan Rogue
Ultimately this for the rogue sport required professional installation as grinding and fishing of nuts was involved. Unlike that for the Nissan Rogue which simply bolted on.
However if you own a die grinder this would be doable. Great product though
by: Keith 08/02/2023
I received parts two days earlier than expected
Great service
by: David 09/11/2022
2017 Nissan Rogue Sport
Shortly after I installed this hitch on on my wife's 2017 Rouge Sport the car was totaled in a hail storm. She purchased an indentical 2022 model. I removed the hitch and reinstalled it on the replacemnet vechile. Same great fit, function and appearance.
by: Joshua 07/30/2021
Chevrolet Colorado
Trailer came very quickly, (3 days earlier than expected) and fit the vehicle without major modification. We opted to have it installed at Uhaul location because they had the lift/tools for fitting the hitch. We also used it to carry 4 bikes 1000 miles from Colorado to Texas.
by: Douglas09/14/2018
2018 Nissan Rogue Sport
curt makes a wonderful product . Had originally ordered a drawtight , did no t fit terrible finish , ugly welds , did not fit ., defective . etrailer made it very easy to return , emailed me a pre paid return label in order to expedite . they credited my account the day after they received the defective hitch . I reordered the curt hitch the same day & had it 3 days later .I was a bit apprehensive , but pleasantly surprised . the Curt hitch fit perfectly , neat strong welds & not a mark on the finish & oh by the way about 10 lbs ligher , important since I was doing this install alone . Will at etrailer was a great help & made fell confident everything would be taken care of . Great staff at etrailer.
by: Ronald04/09/2022
Curt rear hitch receiver was a perfect fit on my 2022 Nissan Rogue Sport. Quality product, fast delivery from etrailer, installation video was spot on and very helpful. A needed addition for my bicycle rack.
by: Randal 07/09/2022
2021 Nissan Rogue Sport
The trailer hitch receiver is well made and pretty easy to install.
I'm very happy with it and the price was very reasonable.
I'm going to get a lot of good use out of it.
by: Paula 06/27/2021
Product came in super fast - and installed without any issue. Have been enjoying using it with my bike rack! Thank you!
by: Randy02/11/2022
2018 Nissan Rogue
Very well made, fit perfect I purchased a large step drill bit at harbor freight for $17 that really helped to enlarge a hole in the frame rail on my 2018 Nissan Rogue I would definitely recommend your products.
by: Randy11/02/2018
2018 Nissan Rogue Sport
Hitch installed with no problems. Works great.
I removed the bumper cover and reinforcement. It let me slide the bolt plates in from the back on the driver's side. I didn't have to cut my frame!
by: Julian 12/25/2021
2021 Nissan Rogue
This fit my 2021 Nissan Rogue perfect. Came with everything needed to install with instructions. On their website they had a video showing time install step by step. Great product. Customer service 2nd to none. Corrin was who I spoke to and she was awesome !!!
by: Jodean05/11/2020
Fit perfectly. Very Easy to put on with the right tools. Person with no knowledge of cars could handle the install no problem if they go through instruction steps given.
by: Bruce10/21/2018
Works great, happy with our trailer hit ch.
25
72
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Hitch Receiver and Wiring Harness for a 2020 Nissan Rogue SportFor your 2020 Nissan Rogue Sport you are going to want the Curt Trailer Hitch Receiver item # C13377 this is a custom fit hitch that bolts directly to your Nissan with included hardware. I have linked an installation video and attached a photo so you can see what this hitch will look like when it is installed. You will also need a wiring harness to control your trailer's lights. I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # C33HR. To...
view full answer...
- Bolt Hole Spacing for Curt Trailer Hitch Receiver 13377 for 2021 Nissan Rogue SportFrom side to side, the bolt holes on the Curt # 13377 are all the same distance apart at 42.46 inches center to center. From the rear to the front, the distance from the first hole to the second hole is 2.804 inches. The distance from the second, or middle, hole to the hole closest to the front of the vehicle is 3.673 inches. This is the same for both sides of the hitch. I have provided a diagram showing these measurements for your reference.
view full answer...
- Curt Trailer Hitch For 2019 Nissan Rogue Sport For Bike RackGood question, though the construction of the Curt hitch for your 2019 Nissan Rogue Sport won't affect its ability to carry your bike racks and four bikes. the Curt # C13377 hitch has a tongue weight capacity of 525 lbs, which is well over the 200 lbs or so you mentioned so they are designed to handle well over double the amount of weight of your bikes and bike rack. We have two hitches that install exactly the same, and have the same amount of ground clearance and bumper clearance, so...
view full answer... - Curt Trailer Hitch Receiver Fit for 2019 Nissan Rogue SportThere is a Curt trailer hitch receiver which fits your 2019 Nissan Rogue Sport, though not the one you mentioned, as that is a fit for standard Nissan Rogues. Instead, the Curt trailer hitch that fits your '19 Rogue Sport is the following: - Curt Trailer Hitch Receiver # C13377 Additionally, if you plan on doing some towing with your Nissan and need a trailer wiring harness, the correct fit is the T-One Vehicle Wiring Harness # 118757.
view full answer... - Bolt On Trailer Hitch Receiver Confirmed to Fit a 2021 Nissan Rogue SportThe Curt Trailer Hitch Receiver # C13377 is confirmed to fit your 2021 Nissan Rogue Sport. While drilling is not required for the mounting holes you may have to enlarge the access holes to get the square hole spacers into the frame with the fish wires. The Curt T-Connector Vehicle Wiring Harness # C33HR will give you a 4-way flat connector. This is needed to connect to most small trailers that you may tow. It will also allow you to use Auxiliary Lights # C53201 with any hitch mounted accessory...
view full answer... - Why is There a Trailer Hitch Available for 2019 Nissan Rogue Sport When Manual Says Not to Tow?This is a great question, and it really comes down to the fact that manufacturers will make just about anything that there is a demand for and a hitch provides more functionality than just towing a trailer. A lot of users prefer to use hitch mounted cargo carriers or bike racks like the Kuat Transfer 2 # KU74FR on their trailer hitches to transport different things from place to place, instead of using the interior cargo space. For your 2019 Nissan Rogue Sport, I recommend using the Curt...
view full answer... - Would Trailer Hitch and Wiring from 2018 Nissan Rogue Fit 2021 ModelThe Nissan Rogue SV changed quite a bit from 2018 to 2021 so you'd need a new hitch like the Curt # C13377. At this time (January 2021) we are still waiting on the wiring fits to be released.
view full answer... - Does Curt Trailer Hitch Receiver Fit 2020 Nissan Rogue SportI was able to verify for you that the Curt hitch is a fit for the 2020 Nissan Rogue Sport; whomever you spoke with simply made a mistake, and the correct fit for the '20 Rogue Sport is indeed the exact part number you mentioned: - Curt Trailer Hitch Receiver # C13377 We have actually installed the Curt # C13377 on a 2020 Nissan Rogue Sport, as you can see in the photo below; I also checked with the official applications guide from Curt and verified this fit for you.
view full answer... - How Much Does the Curt Trailer Hitch Receiver # C13377 WeighThe Curt Trailer Hitch Receiver # C13377 has a shipping weight of 36 lbs so after you take off the packaging it will weight 30 lbs. It does have a max gross trailer weight rating of 3,500 lbs and a max tongue weight rating of 525 lbs. This trailer hitch is confirmed to fit a 2017 - 2018 Nissan Rogue Sport.
view full answer... - Hitch Confirmed to Fit a 2021 Nissan Rogue SportYes, we have a hitch for your 2021 Nissan Rogue Sport. The Curt Trailer Hitch Receiver # C13377 is confirmed to fit your 2021 Nissan Rogue Sport. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" receiver opening which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. If you plan to do any towing you can round out a tow package for your 2021 Nissan Rogue Sport by picking up the...
view full answer... - Which Trailer Hitch Has The Most Ground Clearance For a 2019 Nissan Rogue SportThe Curt Trailer Hitch Receiver part # C13377 and the etrailer Trailer Hitch Receiver part # e79YR which are the two trailer hitch options for your 2019 Nissan Rogue Sport have the same ground clearance measurement. This ground clearance measurement will be around 12-1/2" from the ground to the top inside edge of the receiver tube opening or 10" from the ground to the bottom of the receiver tube collar. Please note that these measurements are not exact and can vary slightly based on tire...
view full answer...
- Curt Receiver Hitch for 2021 Rogue SL and Compatibility with Yakima Bike Rack Yes, I can help you to confirm a hitch receiver that does fit your 2021 Nissan Rogue Sport. However, the Curt Trailer Hitch Receiver item # C57HR does not fit the 2021 Rogue Sport. That hitch receiver fits the standard 2021 Nissan Rogue. You will need the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" item # C13377. This hitch has a 2" receiver we do not offer a 1 1/4" receiver for your year and model Nissan so you will need an adapter. I recommend the Brophy Hitch Reducer item...
view full answer...
- Trailer Hitch Receiver Fit For 2022 Nissan Rogue SportThere are indeed trailer hitch receivers that fit your 2022 Nissan Rogue Sport; I went ahead and verified these fits directly with the manufacturers for you. The fits are the following: - Curt Trailer Hitch Receiver # C13377 - etrailer Trailer Hitch Receiver # e79YR These hitches are very much the same, with the same installation and the same bumper and ground clearances, so I recommend going with whichever one is the best price. The only other thing I wanted to mention, in case you...
view full answer... - Does Curt Trailer Hitch Receiver Fit 2021 Nissan Rogue Sport SVYes, your 2021 Nissan Rogue Sport SV is 100 percent compatible with the Curt hitch you asked about, with the correct fit being the following part number: - Curt Trailer Hitch Receiver # C13377 The # C13377 doesn't actually use screws to install on your '21 Rogue Sport, they are Grade 8 bolts, along with the nuts and washers (all of which is included with the hitch); but yes, that is all that is needed in regards to hardware. It will bolt onto the frame and give you a 2 inch hitch with...
view full answer... - Videos for Installing a Trailer Hitch on a 2017 Nissan Rogue SportWe do have videos for both the Curt # C13377 and Draw-Tite # 76177 on a 2017 Nissan Rogue Sport that I've linked for you to check out. I'm also linking the written instructions for you to check out so you can use both to get a good idea of how they install prior to purchasing. If you let me know what you will be using the trailer hitch for I can make additional recommendations if necessary.
view full answer... - Trailer Hitch To Carry Bike Rack and Tow Small Trailer With 2020 Nissan Rogue SportYes, there is a trailer hitch avaialble for the 2020 Nissan Rogue Sport. I recommend Curt Trailer Hitch Receiver part # C13377 which will give a 2" hitch receiver on the back of the Sport for the 2" bike rack. A nice feature of the Curt hitch is it's a concealed cross tube design so the only portion of the hitch that is visible once installed is the receiver tube for a nice clean OEM look. I have attached a video and photo of what that looks like. If you decide to tow a small trailer in...
view full answer... - Bolts Won't go in Weld Nuts For Curt Hitch C13377If the bolt won't go in the weld nut of the Curt Trailer Hitch Receiver # C13377, the issue is almost certainly that the weld nuts are dirty and thus stopping the bolt from catching. What you'll want to do is clean the weld nut with a brush and lubricant, and I have added a link below to a help article which details exactly how to accomplish this.
view full answer... - Hitch Fit for 2020 Nissan Rogue SportThe Nissan Rogue Sport is a smaller version of the Rogue, and the two vehicle models don't use the same hitches. The # e98846 hitch you'd looked at is a fit for the Rogue, but it will not fit your Rogue Sport. For your 2020 Rogue Sport, I'd recommend the Curt Class III hitch, part # C13377. If you'll be doing some towing with the hitch, you'll also need a trailer wiring harness like # C59236, a ball mount like # D-28 and a # PC3 hitch pin. You'll also need a 1-7/8 inch hitch ball, part...
view full answer... - Hitch Size Availability for 2019 Nissan Rogue SportFor your 2019 Nissan Rogue Sport there are only 2 inch hitches available like the Curt # C13377 which is a really great choice. Typically we get requests for the 2 inch size on vehicles that only have 1-1/4 inch sizes available so this is an interesting change of pace! So what you can do is use a hitch reducer like # HT02 to reduce your 2 inch hitch size down to a 1-1/4 inch and you'd be set.
view full answer... - Trailer Hitch and Wiring Recommendation For 2017 Nissan Rogue Sport There are two hitch options for the 2017 Nissan Rogue Sport, Curt Class III 2" hitch part # C13377 and Draw-Tite Class III 2" hitch part # 76177 which are almost exactly the same. The installation, weight capacity and concealed cross tube design are the same for both hitches. The only real difference is that the Curt option is assembled in the USA which is why I recommend it. I have attached an installation video for your reference. If you need wiring, I recommend Tekonsha T-One Vehicle...
view full answer... - Where to Mount Draw-Tite Trailer Hitch on 2019 Nissan Rogue SportThe Curt Trailer Hitch Receiver # C13377 will simply install to the frame rails underneath the bumper of your 2019 Nissan Rogue Sport. I have added a link below to the installation instructions for you to check out as well.
view full answer...
- What Size Receiver Does the GearDeck 17 Enclosed Cargo Carrier Fit?The GearDeck 17 Enclosed Cargo Carrier item # H00604 fits a standard 2" x 2" hitch receiver. If your 2019 Nissan Rogue Sport has a 2" receiver like the Curt item # C13377, this cargo carrier will fit your vehicle. This lockable carrier is 46-1/2" x 24" x 25" and has a 300 lbs capacity.
view full answer... - Recommended Trailer Hitch Fit for 2017 Nissan RogueThe trim levels of the 2017 Nissan Rogue won't have any bearing on the hitch fits, but the hitch you need will depend on whether you have the Rogue or the Rogue Sport which are distinct models that have different hitch fits. If you have the Rogue, I'd recommend the etrailer brand Class III hitch, part # e98846. If you'll be towing with the hitch, you'll also need the # 118480 wiring harness, the # 2753 ball mount and # 19260 for a 1-7/8 inch ball or # 63845 for a 2 inch. If you have the...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video by:
Chris R
Video by:
Ethan H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Eric H
Written by:
Amanda M
Test Fit:
Brent H
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
3/28/2022
I will have our Customer Service team reach out to you.