Bolt Hole Spacing for Curt Trailer Hitch Receiver 13377 for 2021 Nissan Rogue Sport

Question

Question:

Hi , could you tell me the hole spacing on the Curt 13377 and is the spacing the same on both sides . If not , could you tell me the spacing on both sides . Thanks

asked by: Mark

1

Helpful Expert Reply:

From side to side, the bolt holes on the Curt # 13377 are all the same distance apart at 42.46 inches center to center. From the rear to the front, the distance from the first hole to the second hole is 2.804 inches. The distance from the second, or middle, hole to the hole closest to the front of the vehicle is 3.673 inches. This is the same for both sides of the hitch. I have provided a diagram showing these measurements for your reference.

expert reply by: Robin H

1

Curt 13377
(click to enlarge)

Answer 1

I went out to the warehouse to take some measurements of Curt trailer hitch #C14082. I made a picture showing the measurements for you. The bolt holes, starting from the one furthest forward on the vehicle, measures 2-3/4 inches to the center of the…

view full answer...

Answer 2

The Curt Class IV Receiver Hitch #14001 referenced in your question is indeed confirmed to fit your 1993 Ford F-150 Pickup if it has a standard or step bumper. I spoke with my contact at Curt and he stated that the 1993 Ford F-150 did not have a…

view full answer...

Answer 3

I spoke with my contact at Curt and he put together a chart that has all of the dimensions of the hitches you referenced.

view full answer...

Answer 4

For your 2019 Chevy 4500 Cutaway Chassis we have the Buyers Products part #3371801102 as a confirmed fit. This is only option we have currently but it has great towing capacities at 12,000 lbs trailer weight and 1,200 lbs tongue weight.

view full answer...

Answer 5

For your 2007 Dodge RAM 3500 HD Flat Bed Crew Cab with dually chassis there is not a B&W trailer hitch receiver available. Instead, I recommend you use the Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" #41936…

view full answer...

Answer 6

From side to side, the mounting holes measure 31-1/4 inches apart, center to center. All three sets of holes are the same distance apart. From rear to front, beginning at the rear of the vehicle the distance from the first set of holes to the second…

view full answer...

Answer 7

The measurement from the top of the mounting bracket down to the top of the receiver tube measures 5 inches. Curt trailer hitch #C14082 is a custom fit hitch designed to fit the following vehicles: 1973 - 2000 Chevrolet C/K Series Pickup Cab and…

view full answer...

Answer 8

As we have not had a 1973 Ford F-100 in our shop to test fit the available receivers I can only give you the measurements from one of our receivers so that you can see where it will sit on your truck. The Curt Trailer Hitch Receiver #C14082 is…

view full answer...

Answer 9

The mounting flanges of the Curt hitch part #C15800 are 11.6 inches in length. This is a fit for your 2022 Chevy Silverado 2500 cab and chassis model.

view full answer...

Answer 10

The Curt Trailer Hitch Receiver part #13028 is designed to fit the following vechiles: - 88-91 CHEVY/GMC 4 DR CREW CAB ONLY - 73-79 FORD 250 CREW CAB - 73-06 CHEVY/GMC FULL SIZE CAB & CHASSIS w 34" FRAME - 73-06 FORD PICKUP: CAB AND CHASSIS…

view full answer...

Answer 11

The distance inside the two mounting flanges that the larger plates attach to on the Draw-Tite #37130 are 35-1/2" apart.

view full answer...

Answer 12

I can get the hole dimensions for you of the B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit part #BWHDRH25132 but it is not meant to fit a 2000 spartan MM newmar RV chassis so it will most likely be too narrow since it is designed to fit pick…

view full answer...