bing tracking image
  1. Trailer Hitch
  2. CURT
  3. Class III
  4. 2 Inch Hitch
  5. 4000 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # C13081
Retail:$291.95
Our Price: $174.12
You Save: $117.83
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Shipping Weight: 29 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number C13081 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (241)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - C13081

  • Class III
  • 2 Inch Hitch
  • 4000 lbs GTW
  • Concealed Cross Tube
  • CURT
  • 400 lbs TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA
    • Mounting hardware may be imported


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 4,000 lbs
    • Maximum tongue weight: 400 lbs
    • Not rated for use with weight-distribution systems
  • Limited lifetime warranty


etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13081 Curt Class 3 Trailer Hitch Receiver

Installation Details C13081 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13081

Average Customer Rating:  4.8 out of 5 stars   (241 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

Super easy installation! Step by step YouTube videos provided by etrailers were extremely helpful.



by:

First, the fact that you did a 1 year follow up is great. It's easy to get a positive review when a product is first received but not used much. This hitch is very nice but installation is not what was noted. A mechanic needed to drop the gas tank and modify the bumper cover in order to install. The product itself, 5 stars, installation 1 star.



by:
2015 Jeep Patriot

After owning for one year, it has been a valuable addition to our Jeep Patriot. We have pulled a small trailer well over 3,000 miles. We went from a Suburban to the Patriot and definitely need this to haul our belongings. I did spend the extra time to get the power cable up to the engine compartment by way of fishing it under the carpet or plastic trim. So it is completely hidden except in the door panel. There is no way to get it thru the firewall between the engine and the dashboard so this has worked well. Am going to install this same kit on my sons Patriot for Christmas.



by:
2016 Jeep Compass

The hitch and wiring harness Ipurchased from etrailer fit very well under my 2016 Jeep. It was easy to install and great instructions . This maybe my 4th or 5 th hitch and harnesses I,ve installed on my vehicles. Keep up the Good work and good products
Thank you
Tom



by:
2015 Jeep Patriot

I was extremely satisfied with how easy the trailer hitch and wiring harness were to install. I am not a mechanic, but following the two eTrailer YouTube videos, a friend and I were able to install both in less than 2 hours.
The tip to cut a little less from the rear skirt, versus the instructions, made a world of difference in the final look.



by:
2016 Jeep Patriot

This website and the service is fantastic. The specific products were easy to find and the delivery was on point and fast, of all the hitches I have either ordered or bought in the past this was by far the best way to go. The product was easy to install and the etrailer videos on youtube were outstanding with easy to follow steps and knowledgable information. Will definitely return for future purchases and will recommend to other for there needs. Thanks for making my experience painless.



by:
2016 Jeep Patriot

Excellent product the hitch fit perfect on my vehicle just like it describes in the website and sales staff George sent me all the info I needed for my install! Also the package the hitch came. In was nice nothing at all damaged very good instructions included also. Thank you very much!



by:
Jeep Patriot

I received the product in a matter of days. I installed the receiver hitch on my jeep patriot while it was in my driveway. Installation was a snap and it went just as the video said it would.



by:
2013 Jeep Patriot

A good choice made! Very satisfied, I use it on my 2013 Jeep Patriot pulling my 4' x 8' Harbor Freight Trailor.



by:

Great delivery, Great customer service.Nice gal on the other end of the phone.;)Recommend to all Jeepsters!From Lon's Plumbing Services!!!!Detroit, Mi48315



by:
2016 Jeep Compass

Super fast shipping, hitch went on without any problems, any questions I had were answered by your staff. Thanks



by:

Fast shipping, easy installation. Fit perfect, looks great, highly recommend
Thanks for great service and products



by:

It went on easy but it’s a 2 man job for sure. Me and a friend managed to install it in about 4 hours without using a lift.



by:
2014 Jeep Patriot

Good fit and looks good but if you have never installed a hitch on your style of vehicle before figure more time than what it says in the instructions. I installed one on a 2014 Jeep Patriot. The guy I watched online said 2.5 hours to install. He was right not the one hour the instructions said (instructions said half hour for a pro). Maybe if everything goes your way and you have a lift with help at your disposal then maybe you could pull off the one hour install.

Terry

8/23/2017

Completely satisfied with no problems



by:
2016 Jeep Patriot

Had a professional installation. They simply removed the entire bumper cover. Hitch bolted right on without lowering the muffler or removing the heat shield. Worked out really fast and easy. I will be headed to Lake Okeechobee with my boat in tow next month.

Donald M.

9/14/2017

The hitch has worked out very well. I must say that the hitch is much stronger than the Jeep on which it is mounted. I recently purchased a Swagman bicycle carrier from etrailer. As soon as weather permits, I will be loading my bike to check it out and will be doing a review on that product. Thus far, I am all smiles



by:
2014 Jeep Patriot

Hitch is well made. I didnt have to take down the exhaust or heat shield, i just took the holding pins off from the center lower fascia and was able to pull it forward enough to get the hitch in place. Its tight, but installed in 10min. One thing I did notice, hitch was about 1/2 short of the frame. I installed anyway and it seems secured although not completely snug against the frame on one side. Its tight and doesnt move. Pretty easy install.

Etrailer Expert

Heather A.

9/14/2017

It sounds like your hitch was slightly flexed in shipping. The good news is hitches are easy to flex back into place. I have attached a link for flexed hitches to help you.



by:
2015 Jeep Cherokee

Etrailer, has not let me down. This hitch fits perfectly, anad the one i purchased for my 2015 cherokee did also. Great product, great company, will keep coming back.

Lmic

11/10/2016

Still a great purchase and product, would definitely recommend



by:

What great service! Excellent product easy to install, wish I'd also bought the wiring harnesses.

Rande

5/28/2020

ok I think the coating needs improvement there is rust that has formed on top of the hitch tube. after awhile I suspect this would become a safety issue.

Etrailer Expert

Heather A.

5/28/2020

I recommend to lightly sand the rust with a fine grit sandpaper and cover the area with a rustoleum paint to prevent further corrosion.


by:
2016 Jeep Patriot

Easy to install fits perfect didn't cut as much as they asked cause I like it done to look perfect



by:
Jeep Patriot

Great product. Took me longer to install than an hour but the installation went well. I am a big guy and getting under the Patriot without it being lifted was the most difficult aspect. If I was to do this again I would definitely have the vehicle raised.

Jon W.

8/29/2016

great



by:

I purchased this just over a year ago and received an email today asking me to review it. Let me start by saying that I love that they waited a year to ask for a review. Whats the point of reviewing a product the day you receive it?
The trailer Hitch arrived within a few days of ordering and I watched the videos for installing it on my Jeep Patriot. With there being enough room for me to crawl under the car I had the hitch installed in 30 mins! I also purchased the lighting kit and the entire project was done in an hour. The entire hitch except for the tongue is hidden behind the bumper cover and looks like a factory option. I use this hitch daily for work and its been rock solid and still looks like new. Fit and finish are perfect. Great Product!



by:

Looks good you dont know its there. Till you. Need it



by:

Product is very well built and has worked flawlessly for us. The only change I did was to get longer bolts (5 inch) for the passenger side. This allowed me to use my recovery hook with the tow hitch. If you do this mode you will need to Dremel the holes bigger on the recovery hook to install it. Actual install was straight forward and the install information online at etrailer helped a lot. Don't be afraid to do the trimming on the lower rear plastic. Just follow the instructions and it is easy. You will need a light kit for the trailer lights to work with the Jeep Compass. Well built tow hitch and has given us no issues when towing.



by:

Was an easy install. I removed the rear bumper cover and the the hitch bolted right in. Wiring was pretty straight forward as well.



by:

Great customer service. Hitch fit like a glove, installation video was extremely helpful!


25
241
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • How to Pick Out Correct Rise/Drop Ball Mount
    To pick out the correct rise/drop ball mount you need to take two measurements. Measure from the top of the hitch opening to the ground and then from bottom lip of trailer coupler to the ground and compute difference. The number you get is the amount of drop needed. Based on the dimension you listed I'd be inclined to thing you'd need a drop of around 10 inches or so like # AMSC10 since a lot of trailers sit around 16 inches from ground. I attached a help article on picking out ball mounts...
    view full answer...
  • Torque Specs for Curt Trailer Hitch on 2016 Jeep Patriot
    I've linked the installation details for the Curt trailer hitch that fits your 2016 Jeep Patriot, part # C13081. In step 8 it shows the exact torque specs for the four half-inch bolts. We generally don't post torque specs for trailer hitches live on our site because of the off-chance the manufacturer changes them from one vehicle to another. If a change is made it'll be reflected in the install details linked.
    view full answer...
  • Is Trimming Required to Install a Trailer Hitch on a 2014 Jeep Patriot
    According to the instructions which I have linked for you, you will need to trim the rear fascia on the 2014 Jeep Patriot in order to install Curt trailer hitch # C13081. The trimming that is needed at the very bottom center of the rear fascia is approximately 2-9/16 inches tall by 2-5/8 inches wide. I have also included a picture showing the trim area. If you plan on doing some towing I recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set,...
    view full answer...
    Image 1 for
  • What is the Actual Weight of the etrailer Cargo Carrier # e98874 for 2-Inch Hitches
    The SportRack Cargo Carrier for 2" Hitches # SR9851 has a shipping weight of 67-lbs. This figure includes the packaging so the actual net weight of the cargo carrier itself is approximately 63-lbs. The 2-inch Class III hitch receivers we offer for your 2014 Jeep Compass, which can be seen on the link provided, have varying tongue weight capacities. For example, the Curt hitch # C13081 has a 400-lb tongue weight capacity while the Draw-Tite # 75712 is rated for 525-lbs. When using a hitch-mount...
    view full answer...
  • Does the Yakima HoldUp Evo # Y02479 Work for 2 20-Inch Diameter 4-Inch Wide E-Bikes?
    Yes! The Yakima HoldUp EVO - 2" # Y02479 is an amazing rack for your e-bikes with 20-inch diameter and 4-inch wide tires. Not only will it accommodate your tires, it comes already equipped with same-key locks that deter theft of both the rack and the e-bike itself. It is important to note that the HoldUp EVO comes with a 50-pound per bike weight capacity. If you need a great hitch with the rack for your 2016 Jeep Compass, I recommend the Curt Hitch - 2" # C13081. Not only does this hitch...
    view full answer...
  • Fascia Trimming for Trailer Hitch C12057 for a 2013 Jeep Compass Sport
    There is minor fascia trimming required to install Curt trailer hitch # C12057 on your 2013 Jeep Compass. I have included a picture that comes from the instructions showing the area that needs to be trimmed. I have also linked the instructions for you to view. Instead of the Class II hitch you're looking at I recommend the Class III # C13081. The 2 inch receiver opening of the Class III accepts a lot more accessories than the Class II. The Class III also makes sure you get all of the...
    view full answer...
    Image 1 for
  • Curt Hitch that Fits 2017 Jeep Patriot
    Curt has a custom fit trailer hitch that fits your 2017 Jeep Patriot with the part # C13081 which is your best option but the # C13900 is not a fit and I would not recommend it.
    view full answer...
    Image 1 for
  • Do the Tow Hooks of a 2014 Jeep Patriot Need to Be Removed for Hitch Install
    The tow hook cannot be re-installed once the hitch is installed on the 2014 Jeep Patriot, but the good news is the hitch can be used in the same purpose as the tow hook if needed. The safety chain loops can be used as hooks, or you could get the part # TR63044 and install that in the hitch. I attached an install video for you to check out as well.
    view full answer...
  • Hitch Recommendation for a 2016 Jeep Patriot with a 500lb Capacity Cargo Carrier
    You are correct, I would not recommend the Curt hitch # C13081 because it has a tongue weight capacity of below 500lbs. If you plan on fully loading your cargo carrier to the limit you will want to go with the Draw-Tite # 75712 because of the higher tongue weight rating. Now it's important to calculate the weight of your carrier into the tongue weight capacity as well as the cargo to be sure you don't go over capacity. Another very important thing to check is your owners manual because...
    view full answer...
  • Hitch Bike Rack for Curt Class III Hitch C13081 on 2012 Jeep Patriot
    Your 2012 Jeep Patriot is within the same generation of this vehicle as the 2014 model year shown in the linked installation video. Your Curt hitch # C13081 will mount to your vehicle so that the hitch pin hole is 6-1/2-inches from the rear edge of the bumper cover. This means you want to choose a 4-bike hitch rack with at least 7-inches of clearance to ensure no interference between the rack and vehicle. I suggest the Yakima FullSwing 4 Bike Rack # Y02465. It includes locks for the rack...
    view full answer...
    Image 1 for
  • How Far is a Trailer Hitch Recessed Under the Bumper on a 2014 Jeep Patriot
    We haven't had a chance to install Draw-Tite trailer hitch # 75712 on a 2014 Jeep Patriot but the measurement should be around 6-1/2 inches like on the 2011 model in the video I have linked to the right. We have installed Curt hitch # C13081 on a 2014 Patriot and it measured 6-1/2 inches from the center of the hitch pin hole back to clear the rear bumper. I have linked the video for this hitch as well. If you plan on doing some towing you might be interested in etrailer ball mount kit...
    view full answer...
  • How to Determine if a 2016 Jeep Compass Can Tow a Ski Boat Trailer
    Although the Draw-Tite Trailer Hitch # 75712, which has a Gross Towing Weight (GTW) of 3,500 lbs and a Tongue Weight (TW) of 525 lbs, and the Curt Trailer Hitch # C13081, which has a GTW of 4,000 lbs and a TW of 400 lbs, have weight ratings that may be able to handle the weight of your loaded jet ski trailer you will need to check your owner's manual to determine if your 2016 Jeep Compass can safely tow it. I looked up an online version of your owner's manual and found on page 433 that...
    view full answer...
  • Facia Trimming on a 2013 Jeep Compass Sport
    When installing the Curt Class III Trailer Hitch, # C13081, on a 2013 Jeep Compass Sport, the fascia trimming will start at the bottom of the rear bumper fascia. This will create a break in the bottom line of the bumper fascia. I have attached an installation video on a 2012 Compass that details how to trim the fascia. The Compass in the video is one year older than your Compass, but the installation process and fascia trimming will be the same. The trimming starts at the bottom of the...
    view full answer...
    Image 1 for
  • Recommended Hitch and Wiring Harness for a 2017 Jeep Patriot
    We have a wiring harness for your 2017 Jeep Patriot but hitches like the Curt item # C13081 you were looking at do not include wiring. This hitch does include all of the hardware necessary to attach it to your Jeep. I have linked an installation video below to help you get it set up. To add a 4-way wiring harness to your 2017 Patriot, I recommend the Curt T-Connector Vehicle Wiring Harness item # C56333. This custom-fit T-connector plugs into your Jeep's wiring harness, which is located...
    view full answer...
  • Can Curt Trailer Hitch And Pro Series Cargo Carrier Fit On 2015 Jeep Patriot
    The Curt Trailer Hitch, part # C13081 and the Pro Series Hitch Cargo Carrier, part # 63153 will work well with each other on your Patriot. I have attached a photo that shows the clearance needed at the back of a 2015 Patriot for any hitch mounted accessories to clear the rear bumper. The distance is 6 inches from the center of the hitch pin hole to the back edge of the rear bumper. The Pro Series Hitch Cargo Carrier, part # 63153 has a distance of 5 inches from the center of the hitch...
    view full answer...
    Image 1 for
  • Trailer Hitch and Wiring for a 2016 Jeep Compass to Tow a Pop-up Camper
    For your 2016 Jeep Compass I recommend Curt trailer hitch # C13081. This is a Class III trailer hitch rated for 400 pounds tongue weight and 4,000 pounds gross trailer weight. Since you will be doing some towing I recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I...
    view full answer...
  • Install Pictures and Video for Hitch Install on a 2014 Jeep Patriot
    I attached a couple pictures that show the Curt Hitch part # C13081 installed on a 2014 Jeep Patriot to show you exactly how the underside of your vehicle will look once the hitch has been installed. I also attached an install video for you to check out as well. The tank you referenced does not need to be moved to install this hitch.
    view full answer...
    Image 1 for Image 2 for
  • Best Hitch Recommendation for a 2015 Jeep Compass
    The Curt Hitch part # C13081 that you referenced has been confirmed to fit your 2015 Jeep Compass so it would work well for you. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to...
    view full answer...
  • Recommended Trailer Hitch with Closed Crosstube Ends for 2016 Jeep Patriot
    The Curt Trailer Hitch Receiver # C12057 referenced in your question is indeed closed off at the ends of the cross tube by the mounting plates. The crosstube does not feature open ends like what you are seeing on the Draw-Tite # 75712 that you also referenced. If this is a concern for you, then the Curt # C12057 will be the better option. You may also consider going to a Class III with the Curt # C13081, which is also confirmed to fit your Jeep Patriot. A Class III hitch will not only...
    view full answer...
  • What is Curts Reason for Requiring Support Straps on Their Hitch Receivers
    I spoke with my contact at Curt and a stabilizing/support strap, like part # 18050, is required for the Class III Trailer Hitch Receiver, # C13081, in order to alleviate the leveraging affect that a non-trailer load places on the hitch. He likes to use the example of carrying a gallon of milk. Think of the strain that would be put on your arm if it is extended opposed to if you carry the milk close to your body. This is what also happens with a hitch when a bike rack or cargo carrier is...
    view full answer...
  • What Vehicles Does Curt Hitch # C13081 Fit
    The Curt hitch # C13081 fits the following vehicles: 2011 - 2016 Jeep Compass 2011 - 2017 Jeep Patriot 2017 - 2017 Jeep Compass Old Body Style
    view full answer...
  • What Vehicles Does the Curt Trailer Hitch Receiver # C13081 Fit
    The Curt Trailer Hitch Receiver, # C13081, is designed to fit the 2011 - 2015 Jeep Compass and the 2011 - 2015 Jeep Patriot. I have attached the installation instructions for you.
    view full answer...
  • Is Curt Hitch Compatible With Weight Distribution on Jeep Patriot?
    The Curt hitch you have installed on your 2015 Jeep Patriot, # C13081, is not rated for use with a weight distribution system, and neither are any of the other compatible hitches. However, if your issue is tongue weight, the Draw-Tite # 75712 offers a maximum tongue weight capacity of 525 lbs, which is 150 lbs more than the Curt, but it is also rated for 3,500 lbs of towing, which is 500 fewer than the Curt.
    view full answer...
  • Can my 2015 Jeep Patriot Carry a Dirt Bike using the Curt Hitch and Carrier
    I looked up the owner's manual for your 2015 Jeep Patriot, and on page 422 it gives all the ratings for pulling a trailer. There are 2 different ratings, if you Patriot has the factory tow package or not. If you have the 2.0L, or 2.4L motor without the tow package the max tongue weight is 150 lbs. If you have the 2.4L with the factory tow package or the Freedom Drive II Off road package the tongue weight is 300lbs. From the research I did your dirt bike weighs around 240 lbs dry. So...
    view full answer...
    Image 1 for


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Joe V
Test Fit:
Joe V
Employee Nicholas E
Test Fit:
Nicholas E
Employee Shane T
Test Fit:
Shane T
Employee Randy B
Test Fit:
Randy B
Employee Jared G
Test Fit:
Jared G
Employee Robert C
Test Fit:
Robert C
Employee Ryan G
Test Fit:
Ryan G
Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Andrew K
Video by:
Andrew K
Employee Andrew L
Video by:
Andrew L
Employee Alan C
Video by:
Alan C
Employee Jonathan Y
Video by:
Jonathan Y
Employee Lindsey S
Written by:
Lindsey S
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Kathleen M
Video Edited:
Kathleen M
Employee Dustin K
Video Edited:
Dustin K
Employee Sue W
Video Edited:
Sue W
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924