THIS ITEM IS NOT A FIT FOR
2016 Ford F-150
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
Item # C12188
Retail:$328.95
Our Price: $206.35
You Save: $122.60
2016 Ford F-150
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (71)
- Q & A (0)
- Photos
CURT Trailer Hitch - C12188
- Class II
- 1-1/4 Inch Hitch
- 3500 lbs GTW
- Concealed Cross Tube
- CURT
- 350 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Uses factory existing hardware
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Drawbar, pin and clip sold separately
- Installation instructions included
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class II
- Maximum gross trailer weight: 3,500 lbs
- Maximum tongue weight: 350 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
12188 Curt Class 2 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2018 - 2022 Ford EcoSport
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" - C12188
Average Customer Rating: 4.9 out of 5 stars (71 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Anthony 12/31/2023
Easy install. Took less than 15 minutes. This item was installed on a 22 ecosport titanium. There was no plastic piece to remove on my vehicle so I only had to remove the exhaust clip and place back together. Easy. I did solo using a tow strap to hang the exhaust
by: Luis Medina02/21/2024
Perfect fit, Fast shipping, very good packaged, im satisfied.!! The installing was pretty simple!
by: Daniel04/21/2024
It held up when other people said it wouldn’t hold up we proved them wrong!!!!
by: Denise 07/27/2023
2021 Ford EcoSport
Product worked perfect just as the description stated. The install was very easy. Very satisfied with Curt Trailer Hitch, Highly recommend
by: Philip 03/19/2024
2019 Ford EcoSport
Very easy to install. Works great on my 2019 EcoSport.
by: Lisa 08/18/2023
2022 Ford Ecosport
The trailer hitch as easy to order. It was delivered a day early. My husband was like a little kid opening a christmas present. It is well made and exactly what I wanted. Thank you.
by: Bob Edwards03/31/2021
The hitch was for a 2018 Ford EcoSport SES. The hitch was easy to install and looks good. The wire connector also looks good.
by: Johnathan 02/23/2024
2021 Ford EcoSport
Came nicely packed and only took a few days to get it, would definitely tell everyone to go through you guys great service thank you
by: Pete06/08/2023
Perfect hitch from the perfect .com retailer. Great online support with outstanding installation videos. Fast order acknowledgement, fast shipping and outstanding packaging. I have been a customer since the beginning. Every car I own gets a hitch. Always consistent low price and outstanding service. Service that no other retailer has seemed to grasp. Perfect blend of people and automation.
by: Susan 09/16/2023
2018 Ford EcoSport
GREAT in every way: high quality, perfect fit, super-fast delivery. Thank you, etrailer!
by: Wayne04/13/2023
2022 Ford EcoSport
The price was the lowest I found, the shipping cost at $0 could not be beat by anyone else, and the installation video made attaching the trailer hitch to my Ecosport super easy.
by: David06/20/2023
Easy to follow instructions,perfect fit, works fine
by: Albert 04/28/2023
2nd order I have received and am extremely satisfied with price, delivery and quality of hitch and wiring.
by: David 11/16/2023
2018 Ford EcoSport
Item was as described and shipped quick ly.
by: Kurwin08/08/2020
From the time I jacked the car up it was about 1-1/2 hours to install the hitch. (not bad for a 71 yr. old man) Will use the hitch for my bike rack, the hitch looks good on are Eco Sport the main reason I bought from etrailer was the video of instillation of this product, a company that will take the time to make helpful videos sold me on their product. Thank You
by: Carlos 03/15/2023
Real easy to install so happy that my eco sport has a hitch thank you!
by: Robert D05/15/2023
GOOD PRICE- QUICK DELIVERY TIME-HITCH LOOKS WELL BUILT
by: Darren07/03/2022
2021 Ford EcoSport
Trailer hitch receiver for without issues, but etrailer sent in a bigger than needed box with no structural packaging which resulted in one side of the receiver sticking out of the box with chipped paint and bare metal exposed.
Jenny N.
7/7/2022
Oh no! I will share this with our shipping department and have our customer service team reach out to you. What I recommend would be to use a rust resistant paint on the areas where it is chipped.
by: Rine06/27/2021
2018 Ford EcoSport
When I got my hitch it did not fit. It was about an inch or more too short where the bolts screw in. I thought my 2018 ecosport had a design change. After puzzling over this for a while I noticed the brackets on the hitch were each bent inward. When I straightened them up the hitch fit fine. Other than that it was easy to install.
Sierra K.
6/30/2021
Thank you for your review. I am glad that you got the flex figured out! Here is an article about it:
Helpful Links
by: Gary 08/29/2023
Wonderful products and quick delivery!
by: Carol 03/19/2023
Thank you etrailer for another great product and experience! I love that I receive my orders so quickly!
by: Leonard08/14/2020
The process of getting this hitch has been the easiest online order that I have done. Web site is very informative, the details of the order were updated regularly, and the package arrived earlier then promised. Will definitely order all my trailer needs from here again
Leonard
8/15/2021
The hitch originally started with a 1 1/4 receiver but has been changed to a 2 receiver. the original mounting still looks and is holding up perfectly.
by: Randee11/01/2018
We were very happy to find a hitch for our new car that we could put on ourselves. We will be purchasing a bike rack soon. We hope to bring our bikes on our next vacation. The website exceeded our expectations with many different types of bike racks and other accessories that will work with our new hitch. We also liked the product videos! We would definitely buy from etrailer.com again!
by: Gary06/30/2018
Sturdy construction, easy to follow instructions. Installation went smoothly.
Gary
6/30/2019
Works great install was a snap everything lined up perfectly instructions were detailed enough even for a idiot.
by: John 09/20/2020
Ford
This trailer hitch fits my 2019 Ford Ecosport perfectly and looks great. It was easy to have installed and goes perfect with the profile of the vehicle.
25
71
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch Receiver Availability for a 2018 Ford EcoSport They do not make a class III trailer hitch receiver for your 2018 Ford EcoSport. Instead, you will need to choose from either the Draw-Tite Trailer Hitch Receiver part # 36660 or the Curt Trailer Hitch Receiver part # C12188 which both have a class II rating with a 1-1/4" receiver tube opening. I prefer the Draw-Tite Trailer Hitch Receiver as it is more cost effective and will not require the use of a support strap like part # 18050 for non-towing accessories. If you can tell me what you...
view full answer... - Recommended Hitch And Wiring For A 2021 Ford EcoSport Towing A Small TrailerTo get your 2021 Ford EcoSport set up to tow a small trailer, I recommend starting with the Curt # C12188. This is a very quick and easy install and shouldn't take more than about 30 minutes to complete. This is an American made hitch that will give you a Class II capacity ( 3,500 pounds towing and 350 pounds of tongue weight), but you will need to check your owner's manual for your vehicle capacities. I do need to mention that the lower fascia panel on 2.0L models will need to be removed...
view full answer... - Comparing the Curt and Draw-Tite Trailer Hitches for Bike Rack on a 2021 Ford EcoSportThe Curt Trailer Hitch # C12188 and Draw-Tite Trailer Hitch # 36660 that fit your 2021 Ford EcoSport have the same design and weight ratings so the biggest difference is that the Curt has a thicker powder coat so it will do a better job at resisting damage from any road debris and the elements. If you don't already have a bike rack then I recommend checking out the Kuat Transfer V2 # KU74FR because of the ease of use and the unique U-Shaped frame that helps make loading/unloading your...
view full answer...
- Comparing Curt and Draw-Tite Trailer Hitch Receivers For 2021 Ford EcoSportYou are correct that for your 2021 Ford EcoSport there are two trailer hitch receiver options, the Curt # C12188 and Draw-Tite # 36660. First things first these hitches are very similar as they both share a similar design meaning they have roughly the same installation difficulty. Both hitches have a 1-1/4" receiver opening, and both also have the same 350lb tongue weight and 3,500lb trailer weight rating. With that said I recommend going with the Draw-Tite # 36660 due to it not requiring...
view full answer... - What Hitch Receiver Do You Recommend for My 2021 Ford EcoSport for Towing a Small Trailer?For a great hitch that will be able to accommodate a small trailer on your 2021 Ford EcoSport, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" # C12188. The Curt hitch will provide your vehicle with up to 3,500 pounds of gross tow weight capacity and is manufactured in the U.S.A. For brake light and turn signal functionality, I recommend the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. The Curt connector installs directly to...
view full answer... - What is the Difference between the Curt C12188 and the Draw-Tite # 36660 for My 2021 Ford EcoSport?You are correct that for your 2021 Ford EcoSport there are two trailer hitch receiver options, the Curt # C12188 and Draw-Tite # 36660. These hitches are very similar as they both share a similar design meaning they have roughly the same installation difficulty. Both hitches have a 1-1/4" receiver opening, and both also have the same 350lb tongue weight and 3,500lb trailer weight rating. With that said I recommend going with the Draw-Tite # 36660 due to it not requiring an stabilization...
view full answer... - Hitch for 2021 Ford EcoSport to Tow Smaller TrailerYes we do have a hitch for your 2021 Ford EcoSport with the Curt hitch part # C12188 which is mostly hidden and has the best towing capacities. I attached an install video for it for you to check out as well. If you need trailer wiring too the Curt harness # C59496 would work great. I attached an install video for this on a similar EcoSport for you to check out as well.
view full answer... - Trailer Hitch For A 2021 Ford EcosportThe Curt Trailer Hitch Receiver # C12188 has a tongue weight up to 350 pounds. Using a 2 inch adapter will cut the tongue weight in half making the new tongue weight being 175 pounds. I would recommend trying to find a trailer that can use a class 2 1-1/4 inch by 1-1/4 inch. But you will not be able to safely haul a two inch motorcycle hauler because it will be way over the 175 pounds if you use a 2 inch adapter. The Upgraded Modulite Vehicle Wiring Harness Kit # C59496 will make it...
view full answer... - Wiring Harness that Does Not Require Splicing for a 2021 Ford EcoSportI would be happy to help you. I'll start out by confirming that the Curt Trailer Hitch Receiver item # C12188 you were looking at is a confirmed fit for your 2021 Ford EcoSport. I have linked an installation video so you can follow along and see the final product. For a wiring harness you will want the Tekonsha ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit item # 119250KIT. This harness does not require any cutting or splicing of wires....
view full answer... - Comparing Draw-Tite and Curt Trailer Hitches for 2020 Ford EcoSportThat is a good question and as is the case with many vehicles, the trailer hitches that fit the 2020 Ford EcoSport are similar to the point where there is little differentiating them. Both the Draw-Tite Trailer Hitch # 36660 and Curt Trailer Hitch # C12188 are a fit for your '20 EcoSport and have the same 3,500 lb towing capacity, 350 lb tongue weight capacity and even install the same way. Each hitch is a bolt-on installation that does not require any type of drilling to install on your...
view full answer... - Is 7-way Connector Needed For Towing Tear Camper With Electric Trailer Brakes W/ 2019 Ford Ecosport?Even with a wireless brake controller like the Curt Echo Wireless # C51180 or the Autowbrake controller # 3430001 will require a 7-way connector to be installed on your 2019 Ford Ecosport to control your Tear Campers trailer brakes. I recommend going with the Curt Echo Wireless and the 7-way Connector # ETBC7L as it will be the easiest to get installed, while still being a very reliable option. To get this installed you will first need to install a 4-way connector using the Curt Powered...
view full answer... - Trailer Hitch Sizes Available for a 2018 Ford EcoSportThere are two trailer hitch options available for a 2018 Ford EcoSport, the Curt Trailer Hitch Receiver part # C12188 and the Draw-Tite Trailer Hitch Receiver part # 36660 which both have a 1-1/4" receiver tube openings. Therefore, they do not offer a trailer hitch for a 2018 Ford EcoSport with 2" receiver tube opening. However, you can obtain a 2" receiver tube opening with an adapter like the Hitch Expander Adapter part # 80303 but keep in mind these reduce your tongue weight capacity...
view full answer... - Are There Cargo Carriers that Can Fit 1-1/4 inch HitchesWe do have cargo carriers that fit the 1-1/4 inch hitch size like with the Reese part # 63155 which would work great in a Class I hitch that fits your 2019 Ford EcoSport like the Curt # C12188.
view full answer... - What is the Difference Between the Curt # C12188 and the Draw-Tite # 36660 for My 2021 Ford EcoSportThe main difference between the Curt Hitch # C12188 and the Draw-Tite Hitch # 36660 for your 2021 Ford EcoSport is that the Curt is assembled here in the United States while the Draw-Tite is installed overseas. Other than that difference, there are a lot of similarities. Both of these 1-1/4 inch hitches have a 350 pound maximum tongue weight and a 3,500 pound maximum gross towing weight capacity. Also, both of the installation processes include minor fascia trimming. When taking these...
view full answer... - Hitch-Mount Trike Carrier for 1-1/4-Inch Class II HitchI understand your predicament, having a hitch and hitch bike rack that will not work together. Smaller vehicles typically accept smaller hitches, and for your 2018 Ford EcoSport compact SUV only 1-1/4-inch Class II hitches are offered since the car itself cannot handle the load that a 2-inch Class III hitch typically can. We offer 1-1/4-inch Draw-Tite # 36660 and Curt # C12188 hitches both of which are rated for 350-lbs of tongue weight. Hitch adapters like # HTAD, # HT5R, and # C45785...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Dustin K
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Matthew E
Updated by:
Isabelle B
Updated by:
Eric H
Written by:
Ronnie R
Video by:
Jonathan Y
Test Fit:
Robert C
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kurwin
8/9/2021
GREAT GREAT GREAT and GREAT again