Are There Cargo Carriers that Can Fit 1-1/4 inch Hitches

Question

Question:

It seems that most all Ive been able to find of the cargo carriers that attach by hitch appear to require a 2inch receiver and all of the hitch bars for the 2019 Ford EcoSport appear to only have 1.25inch receivers. Can I not use a cargo carrier with the EcoSport? Thanks.

asked by: Scott B

0

Expert Reply:

We do have cargo carriers that fit the 1-1/4 inch hitch size like with the Reese part # 63155 which would work great in a Class I hitch that fits your 2019 Ford EcoSport like the Curt # C12188.

expert reply by: Jameson C

0

Answer 1

You are correct that for your 2021 Ford EcoSport there are two trailer hitch receiver options, the Curt #C12188 and Draw-Tite #36660. First things first these hitches are very similar as they both share a similar design meaning they have roughly…

view full answer...

Answer 2

That is a good question and as is the case with many vehicles, the trailer hitches that fit the 2020 Ford EcoSport are similar to the point where there is little differentiating them. Both the Draw-Tite Trailer Hitch #36660 and Curt Trailer Hitch…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 7

The 2 inch trailer hitch I recommend for your 2024 Mazda CX-5 is the etrailer Trailer Hitch #e98902. This is the best due to its matte black powder coat which resists the inevitable scuffs better than other hitches.

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

To install the etrailer Trailer Hitch Receiver item #e98902 on your 2019 Mazda CX-5 Signature you will need to remove a two foot long L shaped panel that is beneath your vehicle. I have linked a diagram I made as well as an installation video. This…

view full answer...

Answer 11

Hey Steve! I really like having the wiring sit next to the receiver as well so I definitely get where you're coming from. Here are the parts I recommend installing on your 2024 Mazda CX-5: - etrailer Trailer Hitch Receiver #e98902 - Curt…

view full answer...

Answer 12

For the etrailer Hitch #e98902, the only possible trimming you need to do is if the seam seals overhang on the housing locations on your 2021 Mazda CX-5. This is if you do not have a Grand Touring model. If you happen to have the Grand Touring Model,…

view full answer...