Comparing Draw-Tite and Curt Trailer Hitches for 2020 Ford EcoSport

Question

Question:

I see you have a couple hitches for the 2020 ford ecosport, the draw tite 36660 and curt 12188. is there any real difference or should i just go by price?

asked by: Chris R

0

Expert Reply:

That is a good question and as is the case with many vehicles, the trailer hitches that fit the 2020 Ford EcoSport are similar to the point where there is little differentiating them.

Both the Draw-Tite Trailer Hitch # 36660 and Curt Trailer Hitch # C12188 are a fit for your '20 EcoSport and have the same 3,500 lb towing capacity, 350 lb tongue weight capacity and even install the same way. Each hitch is a bolt-on installation that does not require any type of drilling to install on your EcoSport.

Really, the only difference aside from price is that the Curt is assembled in the USA while the Draw-Tite is not, and the Curt has a glossy black powder coat finish while the Draw-Tite does not, so you can use those factors to determine which is the right hitch for you. I have added links to the written instructions for you to take a look at as well.

expert reply by: Kyle S

0

Answer 1

You are correct that for your 2021 Ford EcoSport there are two trailer hitch receiver options, the Curt #C12188 and Draw-Tite #36660. First things first these hitches are very similar as they both share a similar design meaning they have roughly the…

view full answer...

Answer 2

We do have cargo carriers that fit the 1-1/4 inch hitch size like with the Reese part #63155 which would work great in a Class I hitch that fits your 2019 Ford EcoSport like the Curt #C12188.

view full answer...

Answer 3

I attached a picture of the Yakima FullBack 2 Bike Rack #Y02634 you mentioned on a 2018 Ford EcoSport like you have. This is a really great trunk rack option we recommend highly. It has locks for the rack and bikes (most don't), is easy to…

view full answer...

Answer 4

I understand your predicament, having a hitch and hitch bike rack that will not work together. Smaller vehicles typically accept smaller hitches, and for your 2018 Ford EcoSport compact SUV only 1-1/4-inch Class II hitches are offered since the car…

view full answer...

Answer 5

You are correct that for your 2021 Ford EcoSport there are two trailer hitch receiver options, the Curt #C12188 and Draw-Tite #36660. These hitches are very similar as they both share a similar design meaning they have roughly the same installation…

view full answer...

Answer 6

Yes we do have a hitch for your 2021 Ford EcoSport with the Curt hitch part #C12188 which is mostly hidden and has the best towing capacities. I attached an install video for it for you to check out as well. If you need trailer wiring too the Curt…

view full answer...

Answer 7

Even with a wireless brake controller like the Curt Echo Wireless #C51180 or the Autowbrake controller #3430001 will require a 7-way connector to be installed on your 2019 Ford Ecosport to control your Tear Campers trailer brakes. I recommend going…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...