Hitch for 2021 Ford EcoSport to Tow Smaller Trailer

Question

Question:

Do you guys have a hitch for my 2021 Ford EcoSport? It's for a small trailer.

asked by: Betty

0

Expert Reply:

Yes we do have a hitch for your 2021 Ford EcoSport with the Curt hitch part # C12188 which is mostly hidden and has the best towing capacities. I attached an install video for it for you to check out as well.

If you need trailer wiring too the Curt harness # C59496 would work great. I attached an install video for this on a similar EcoSport for you to check out as well.

expert reply by: Jameson C

0

Answer 1

You are correct that for your 2021 Ford EcoSport there are two trailer hitch receiver options, the Curt #C12188 and Draw-Tite #36660. These hitches are very similar as they both share a similar design meaning they have roughly the same installation…

view full answer...

Answer 2

That is a good question and as is the case with many vehicles, the trailer hitches that fit the 2020 Ford EcoSport are similar to the point where there is little differentiating them. Both the Draw-Tite Trailer Hitch #36660 and Curt Trailer Hitch…

view full answer...

Answer 3

Even with a wireless brake controller like the Curt Echo Wireless #C51180 or the Autowbrake controller #3430001 will require a 7-way connector to be installed on your 2019 Ford Ecosport to control your Tear Campers trailer brakes. I recommend going…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...