Summer Starts Here - Save up to 70%
Light-duty winch with 1-hp, permanent magnet motor and dynamic brake lets you quickly and safely recover a stuck ATV. Sealed motor, gearbox, and contactor protect winch from the elements. Handlebar-mounted rocker switch included.
Features:
Specs:
This Powersports ATV recovery winch is designed for light-duty work and recreational applications. It's perfect for your small sport quad 4x4, 2-wheel drive ATV, or snowmobile with a maximum GVW of 1,000 lbs. It includes a handlebar-mounted rocker switch so you can control the winch from the seat of your ATV. The motor, gearbox, and contactor are sealed so you can confidently run your ATV through mud and water. And it includes a dynamic brake, a synthetic rope and hawse fairlead, and a universal mounting channel for installation.
This winch features a 1-horsepower, 12-volt DC motor with 2,000 lbs of line pull. The permanent magnet motor offers the same line-pulling power and speed as a series-wound motor of comparable size, but it's lighter and uses less current. The motor and gearbox unit is sealed to keep water out, and it's constructed of durable, corrosion-resistant materials including the powder coated housing and zinc-plated steel hardware.
The power unit contains 60- and 80-amp relay switches that transmit power from the ATV's battery to the winch motor. It has 18" leads that run to the vehicle's battery, 6' leads that run to the winch motor, and 12" leads with quick connects for the handlebar-mounted rocker switch. It will typically be mounted with included hardware under the ATV's front cover or hood near the battery.
The power unit has a weather-resistant seal between the lid and base and rubber seals where the wires enter the box. Both relay switches have an electronic assembly that has been filled with an epoxy pour to create a waterproof seal.
The free-spool clutch enables you to pull out the rope by hand. This saves battery power, prevents the brake from wearing down prematurely, reduces wear on the motor, and is much faster than waiting for the drum to power out the rope. To release the clutch for free-spooling simply pull out the hard plastic knob and rotate it 90 degrees so that the pins on the shaft rest against the catch. To reengage the clutch, rotate the knob 90 degrees and push it back in.
The clutch is driven by a single-stage planetary gear train. This provides more speed than traditional worm gear drives.
The dynamic brake uses resistance from the winch motor to control line speed. When the winch is pulling the rope in there is no resistance on the drum. As you start to slow the pull with the rocker switch the motor slows the drum's rotation. When the power is stopped the drum does not turn and the load is held in place.
Since there is no physical brake device the winch is lighter and has a smaller profile than winches with a mechanical braking system. This makes it easier to mount in places with limited space available.
The handlebar-mounted rocker switch lets you operate the winch from the seat of your ATV. It includes mounting hardware and an 8' wiring harnesss with quick connects.
There is also a wireless remote kit (BDW20099 - sold separately) that lets you control the winch from up to 100' away.
The synthetic rope is made of HMPE fiber that is lightweight yet stronger than steel. This synthetic rope is safer to use than a steel rope because it generates less kinetic energy - and therefore less kickback - if a break occurs. It won't stretch - or creep - over time like steel rope can. And it's also less likely to fray and create sharp strands so it's easier to handle and easier to spool.
The rope winds around a solid steel drum. The mounting flanges are strong enough to resist bending or breaking if the rope wrap becomes uneven and excess stress is put on the drum.
A 6' woven polyester protective sleeve at the hook end of the rope provides extra protection for your hands. A hand-saver strap is also included to use in conjunction with work gloves (BDW20070 - sold separately) so that you can safely handle the rope and hook.
The removable clevis hook is constructed of high-strength forged alloy steel that is heavy duty and rust resistant. It has a spring-loaded safety latch for quick fastening and removal. The hook attaches to the steel thimble on the end of the synthetic rope.
This winch includes a CNC machine billet aluminum hawse fairlead that is designed to be used with synthetic rope. It helps guide the rope as it's winding in and out, and it has a rounded hole to help prevent wear. The 3/4" thick fairlead has a black anodized finish that resists corrosion, and it installs with zinc-plated hardware.
Note: The hawse fairlead does not mount directly to the winch - it typically mounts to the included channel or to tabs on a custom mounting plate (sold separately). Bulldog Winch mounting plates - as well as most other aftermarket mounts - include these tabs.
The winch is constructed of strong, durable materials that are able to withstand any weather condition or terrain. The motor and gearbox unit is sealed to keep water out, and it's made of corrosion-resistant powder coated steel.
To install the winch on the front of your vehicle you will need a suitable mounting location. The winch and fairlead may be bolted to the included mounting channel. This mounting channel is a basic L-channel and may not be compatible with your ATV. In most cases you will need to bolt a custom mounting plate (sold separately) to the front framework of your ATV in order to mount the winch and fairlead.
The power unit will typically mount under the front cover or hood near the battery. You will need to drill 2 small holes in the mounting surface to secure the unit with the included hardware. Connect the 18" leads to your vehicle's battery and run the 6' leads to the winch terminals. Any excess wiring can be neatly tucked around the engine and secured with zip ties (not included).
You can mount the rocker switch on either handlebar but it's typically mounted near the brake on the handlebar opposite the throttle. This allows you to control the winch and accelerate the ATV at the same time. It includes mounting hardware and an 8' wiring harnesss that connects to the contactor with built-in quick connects.
| Layers of Rope | Capacity (lbs) | Total Rope on Drum (ft) |
|---|---|---|
| 1st Layer | 2,000 | 6-1/2 |
| 2nd Layer | 1,630 | 14 |
| 3rd Layer | 1,380 | 23-1/2 |
| 4th Layer | 1,190 | 35 |
| 5th Layer | 1,050 | 40 |
The line pull capacity of your winch is determined by the maximum load your winch can pull with a single layer of rope on the drum. As more layers of rope are wound onto the drum, pulling the same load requires more force, leading to a loss in winching power. With a 2nd layer of rope around the drum, your line pull capacity is reduced by approximately 14 percent. With 3 layers on the drum, the line pull capacity is reduced by approximately 23 percent, and with 4 layers on the drum it is reduced by approximately 35 percent.
Note: It is recommended that you begin any line pull with a minimum of 5 wraps and a maximum of 2 layers of rope on the drum.
Increase the pulling capacity of your winch by doubling up the rope with a pulley block (BDW20023 - sold separately). Secure the pulley block to a tree saver strap (BDW20051 - sold separately) with a bow shackle (BDW20006 - sold separately) to provide a strong anchor for your double-line pull. Or use the Bulldog Winch 7-piece rigging kit (BDW20034 - sold separately) that includes everything you need for heavy-duty recovery. Using double-line operation will approximately double your winch's pulling capacity.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're taking a look at the Bulldog winch Powersports series ATV winch and the Powersports ATV recovery winch is designed for recreation and light duty work applications. This is perfect for a 250 to 350 CC sport quad 4x4, two wheel drive ATVs, and snowmobiles. It's recommended for ATVs or units with the maximum gross vehicle weight of up to 1,000 pounds. It features a 1 horsepower permanent magnet motor which delivers fast and safe line pooling. The motor is lighter and uses less current than a series one motor. And it is sealed when it comes to the motor and gear box, so that keeps water out and prevents internal corrosion from taking place.
It has the sealed power unit with dual relays to transmit power from the vehicle batter to the winch motor. It mounts with the included hardware under your ATVs front cover or hood.Now the winch itself features a dynamic brake which holds the load while minimizing winch creeping. It's an all steel single-staged planetary gear train, which provides increased drum speed when compared to traditional worm drives. And it comes with a rocker switch located right here. This lets your control the winch from the seat of your ATV, so it's got plenty of wire in there and you can mount it to the handlebars with the included handlebar mount kit.It also offers a free spooling clutch located right here, so you pull this out and it moves it to free spool mode.
So that's going to insure fast route payout and reduced wear on the motor. It comes with a 40 foot long synthetic rope, very strong and durable. It's also light weight and safer to handle when compared to a steel cable. And then it comes with a steel hook with the safety latch mechanism to prevent accidental disconnecting. It comes with the pin and clip, so it attaches to the end of the synthetic rope.
It's also got the metal plate in here so that's going to prevent the hook as it rotates from doing any type of damage to the rope itself.The hawse fairlead is included. This is a heavy duty CNC machine billet aluminum Hawse fairlead, has the rounded design to it which helps prevent friction damage to the rope. And it has a black anodized finish to resist rust and corrosion. It also comes with an universal mount plate and hardware, so that's included for winch and fairlead mounting. Now you may need a custom mounting plate which is sold separately.
That may be required to mount the winch and fairlead to your specific ATV. You can check out options at eTrader.com.We're looking at a durable black powder coated steel body and motor to resist rust and corrosion. The rated line pool for this unit with a single layer of synthetic rope around the drum is 2,000 pounds. That's the static load. Motor is a 12-volt DC motor. Line pool is zero pounds. Power drill is 8 amps. Line speed is 10.5 feet/minute. Line pool at 2,000 pounds, which is max capacity. Power drill is 120 amps with a line speed of 2.9 feet/minute. Gear ratio is 153:1. The dimensions of the drum, that's an 1 1/4" diameter drum, measures 2 13/16" long. And the winch itself is about 11 3/16" long by about 4 5/16" wide that's front to back, by about 4 1/8" tall top to bottom.Again, it comes with everything laid out here on the table, so you get the wench, you get the rope, you get the hook, you get the rocker switch with all the necessary wiring, universal mount plate, hawse fairlead, all the necessary hardware for the installation, handlebar mount, and then you get the control box with the included wiring on there. Everything has quick connect design to it so you have your connectors already installed, ring terminals already installed for easy connecting to the winch. Connection posts as well as to the battery posts.That's going to do it for today's look at the Bulldog winch Powersports series ATV winch.
Average Customer Rating: 4.7 out of 5 stars (32 Customer Reviews)
Light-duty winch with 1-hp, permanent magnet motor and dynamic brake lets you quickly and safely recover a stuck ATV. Sealed motor, gearbox, and contactor protect winch from the elements. Handlebar-mounted rocker switch included.I have never had a problem with e trailer co. Competent, kind professionals…unlike most , in this world of many pathetic (so called) businesses …
If I need something they sell, I order it from them. No shopping around needed.
Satisfaction guaranteed.
use on pontoon. works great
Real decent winch. I just use it for the plow. Havent had any snow just yet so I can't say how reliable it is
It broke second time used it
Great winch for my 2011 Polaris Sportsman 500. Easy to install and cable up. Delivered as promised. I have bought a few things from etrailer.com and always on time and still working.
It did everything that I wanted it for ,hasn't let me down. I recommend this product. The price was great the quality was also great. I really like the rope instead of the steel cable. Rolls up on the drum better. And not as stiff as the steel ones.
Works fine, very satisfied
Pros:
Winch seems well made. Custom mounting bracket for my 2016 Polaris Sportsman 570 fit perfect. More than enough wire. etrailer installation video is excellent. Still winter so have not had a chance to give it a serious test.
Cons: Manufacturer instructions were worthless. Supplied connectors for the handlebar and remote switch were total junk. They must have saved 15 cents by supplying this junk.
I can't really rate the product yet because I just installed it, but it seems to be working just fine.
This five-star rating is for the customer service of the company though. I got a phone message on the Saturday following when I ordered it. The company called to let me know that the winch I ordered wasn't available but they had another, comparable one in stock they could send me. They followed up with an email. I responded to the email saying that I would like the replacement and go ahead and make the change. I got a response within a couple of hours and the product was in the mail Monday morning.
The winch is installed and it seems to work.
Found the exact winch i needed looking at the info on the website. Made one phone call to see if it could reach me in time, as I was totally amazed that I actually received the winch the next day!
Installed in very short time in my enclosed cargo trailer. It works great, as advertised.
Still scratching my head over ordering one day & by the next afternoon, in another state, I received & installed it.
Winch mount and winch kit for ATV, arrived as expected. Great customer service and communication, after order, during transport, and upon arrival. Haven’t mounted the winch yet but trust if there are any issues or questions, etrailer.com customer service will resolve. Good experience so far.
Arrived quickly, fairly easy to install on my ATV. Have not HAD to use it yet, but it sure seems like it will do the trick. Main purpose for my snow plow. Definitely will be ordering from etrailer if a need arises in the future.
I needed a replacement winch for my 2008 Arctic Cat 400 ATV. Etrailer promptly answered my request for assistance in selecting the correct model. The Bulldog 2500# winch arrived promptly and I had it installed in less than 2 hours. It perfectly fit the existing winch mount. Works flawlessly.
Worked great for several uses with my plow.. but it doesn't appear to last for the long haul. Big storm right now, started to plow, it made some cracking sound and stopped working...now I can't plow my driveway and will have to pay someone. I bought this instead of going to Harbor Freight.
First time ordering from etrailor.com. Was very please with the product everything went great. Will definitely be ordering products from etrailer.com again
Great winch!! I installed it on my Popup Camper and its great!
I bought this to use on my side by side. I could not have a better winch. I have had other winches and none compare to this. It is quit and really strong.
just unpacked everything and its just what i ordered. all looks like well made and in good shape. will be installing it monday afternoon and will give an update then.
Great setup on my quad for plowing snow!
Works like a champ!
excellent product
Do you have a question about this Electric Winch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.