Bulldog Winch Mini Rocker Switch - Handlebar Mounting Bracket - Wiring Harness - 8'

Video Transcript for Bulldog Winch Electric Winch BDW20151 Review

Today we are going to review part number BDW20151. This is the Bulldog mini rocker switch wiring harness with the handle bar mounting bracket. Now, this mini rocker switch wiring harness right here is for controlling the line in and line out of your ATV or UTV winch. The switch itself has a nice rubber cover over it to make it weather and water resistant. The switch actually operates as a momentary in and out switch and with it in the center, it's the off position. Right now it's automatically in the center position which is off.

You will notice it says, "In," so if you push down on that switch you have to hold it down for it to keep operating. As soon as you remove your thumb, it will click back into the center off position. Up here it says, "Out." You just push which ever one you need but you do have to hold it down to operate it. Now it does come with 8 feet of wiring. Also, includes this universal handlebar mount for the switch. You can mount the switch to the handlebar of your ATV.

Basically there is 3 wires. The red wire right here, your wiring harness goes to the ignition switch. Then, the black and the green wire made to connect to the solonoid of the winch. That should do it for the review of part number BDW20151. The Bulldog mini rocker switch wiring harness with the handlebar mounting bracket.

.