1-1/2" 12pt Socket - 3/4" Drive - Chromium-Vanadium Steel
(230 reviews)
Price: $15.47
In Stock
1-1/2" 12pt Socket - 3/4" Drive - Chromium-Vanadium Steel
Item # ALL643210
Retail:$16.99
Our Price: $15.47
You Save: 9%
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (230)
- Q & A (0)
- Videos (1)
- Photos
Powerbuilt Hand Tools - ALL643210
- Sockets
- Ratchets and Sockets
- 1-1/2 Inch
- Powerbuilt
- 3/4 Inch Drive
- Alloy Steel
- SAE
1-1/2" SAE socket with a 3/4" drive should be used with a compatible socket wrench (not included) to apply torque when installing a ball on a ballmount. Durable, chromium-vanadium steel construction resists corrosion.
Features:
- 1-1/2" SAE socket helps apply torque when installing a hitch ball
- Compatible with a 3/4" drive socket wrench (not included)
- Mirror-polished, chromium-vanadium steel construction resists corrosion
- Labels engraved for quick identification
- Compliant with ANSI standards
Specs:
- Diameter: 1-1/2"
- Drive: 3/4"
- Points: 12
- Lifetime warranty
643210 Powerbuilt 1-1/2" 12pt Socket - 3/4" Drive - Chrome-Vanadium Steel - Alltrade Tools
Video of 1-1/2" 12pt Socket - 3/4" Drive - Chromium-Vanadium Steel
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Powerbuilt Hand Tools - Ratchets and Sockets - ALL643210
Jeff Hello everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at the Powerbuilt 3/4 inch drive by 1 1/2 inch 12 point socket. Now, this 1 1/2 inch SAE socket will help you apply torque when you're installing a hitch ball. It is a 12 point design socket. And as we mentioned, it is compatible with a 3/4 inch drive socket wrench.
This has a nice, mirror-polished, chromium-vanadium steel construction, which resists corrosion. It is cold forged and heat treated. And if you notice on the side, the labels are engraved for quick identification of the size. This is compliant with the ANSI standards. Few specs again, the socket size is 1 1/2 inches.
The drive size is a 3/4 inch. Now, the overall diameter on this, just to give you some measurements to make sure it fits your application, about two inches overall diameter. And the length of it is right at 2 3/8 inches. But that should do it for the review on the Powerbuilt 3/4 inch drive by 1 1/2 inch 12 point socket..
Customer Reviews
1-1/2" 12pt Socket - 3/4" Drive - Chromium-Vanadium Steel - ALL643210
Average Customer Rating: 4.7 out of 5 stars (229 Customer Reviews)
1-1/2" SAE socket with a 3/4" drive should be used with a compatible socket wrench (not included) to apply torque when installing a ball on a ballmount. Durable, chromium-vanadium steel construction resists corrosion.by: Jeffrey 05/16/2020
Socket fits the standard 1 1/2 inch nut on a 2 inch trailer ball.
by: Popotamus08/10/2022
Does the job!
by: Jeff 05/06/2021
by: Michael05/02/2024
I had to return the item. I bought it to tigten the nut on the ball for the equalizer weight distrubution hitch that I bought from etrailer. The WDH is great. But the etrailer socket was too thick, and I had to get the equilizer socket. But I think it was a bit much that only equilizers thin walled socked would work on for the install and that socket was VERY expensive.
by: Robert06/26/2023
The Equalizer products are great….the shipping of 65 pound of Equalizer parts in a 1 cubic foot box, not so much. The UPS driver had a hard time carrying the box to our porch. When he set it down it had a 4” hole in the corner and the 1-3/4” socket was in his hand that had fallen out and, we learned later upon opening the box, the lubricant was missing (see attached photos). To expect anyone to pick up a 65 pound loaded cardboard box with no hand holds is unrealistic thus, the reason for the hole in the box and missing lubricant.
I was impressed with the quality of the hitch and the quick delivery. Also, a call to etrailer explaining my missing lubricant was handled with courtesy and understanding with replacement lubricant headed my way. EXCELLENT customer service….thanks!
by: Smithsonite11/22/2022
Quality socket. I saw some bad reviews saying this won't fit the recessed Equalizer hitch ball nut. Well, you've got to pivot the 2 bar pockets in the head out of the way, then it fits perfect. These aren't easy to move on a new hitch, so get something strong, with plenty of leverage.
by: Gary 03/28/2023
Just what I needed to torque my hitch ball down. Worked perfectly!
by: Benjamin03/25/2024
I purchased an unusual hitch [RP66560] that wouldn't allow a standard wrench to tighten the nut for the hitch ball. This product was absolutely necessary for installation and the price was very fair.
by: Steve08/25/2019
Review for the thin wall 3/4" drive 1 7/8" socket. This was needed for torquing a hitchball to a weight distribution head. The thin wall was just narrow enough to slip onto the nut down in the head. It was snug but came off after torque was set with abit of care. If you have a tight work space such as l did on this application, you must use a thin wall socket. Product appears quality & should last yrs. 5 stars for product & timely shipping from etrailer...
by: Edward11/21/2023
The socket worked great with my equalizer hitch ball installment its thin walled but very strong
by: Shelley 05/08/2024
Exactly what we were looking for an we had not been able to find it anywhere else! Quality is great!
by: Rachel03/17/2024
This is a great socket, I just ordered the wrong one. I’ll return it which I’m sure will be just as quick and easy as their shipping is. I really like how fast everything was shipped out and the updates.
by: Yuval02/03/2024
Gets the job done.
My one complaint is that the agent didn't advise me on getting a socket. So I ended up paying shipping just for the socket.
Don't buy the overly priced socket from
by: Brad 07/20/2023
Great customer service This is why I do my business with etrailer They BELIEVE in customer satisfaction!!!
by: Raymond 01/26/2024
This socket was a must have for my hitch
by: Richard05/03/2023
Socket performs as expected. I use to to install or replace the ball on certian W/D hitches
by: Jerry 07/24/2023
Very good quality socket and quick delivery…what I have come to expect from trailer!
by: Blaine 03/07/2023
Used this for my Equalizer W/D hitch ball. Fit great and did precisely what it was made for.
by: David08/03/2023
Made life much easier, thanks Etrailer for the recommendation
by: Nick12/11/2022
The socket is heavy duty but it will not fit in my fastway E2 hitch as described. I ended up having to pay $160 to get my local camper dealer to setup my hitch.
by: Michael 12/10/2022
The customer service is out of this world. The hitch was easy to install and works great. The only problem was trying to find a 3/4 torque wrench to torque the hitch ball to 430 ft/lbs. very pleased
by: Blair02/02/2022
This was supposed to be a thin wall socket needed to torque the hitch ball on the equalizer hitch system. Outside diameter of the socket is too big And did not work.Luckily I was able to find a shop 20 miles away from me that was able to mount the hitch ball and torque it correctly For a fee. Wish I would’ve save the money on the socket to go towards paying to get it done.
by: Jeff 04/05/2023
Socket fit the receiver and worked well to torque receiver ball to specs.
by: Jack04/01/2019
Fits the Equalizer trailer system 14,000lb hitch ball bolt perfectly inside the Equalizer hitch head!
And who doesn't like "perfect" with a $40 savings over the Equalizer socket price.
THANKS etrailer.com
by: Perfect!03/20/2019
Amazing quality and worked perfectly on my 14000 lb Equalizer Distribution hitch.. was a 60 second tighten, and was worried this thin wall socket wouldnt fit (silly me)
I purchased a 24ft 3/4 drive torque wrench and that did the trick.
Definitely keeping this aboard on my travel trailer.
25
229
Show More Reviews
See what our Experts say about this Powerbuilt Hand Tools
- Fastway Weight Distribution System for 19 Foot E-Pro Camper with 400 lb Dry Tongue WeightThe loaded tongue weight is the figure that is most important for picking out a weight distribution system. Based on what you mentioned and the dry weight of the trailer being 400 lbs I would be willing to wager your loaded tongue weight will be around 600 lbs. Which based on that the Fastway system part # FA92-00-0800 would be a perfect solution as it has a tongue weight range of 400 to 800 lbs and your tongue weight should fall right into the middle of. The only thing else you'd need...
view full answer... - Wrench and Socket Sizes Needed To Tighten Curt 1-7/8" Hitch Ball # C40002The 1-7/8" Hitch Ball # C40002 will require a 1-1/2" Socket # ALL643210. You will need a wrench that will open to 1-5/8" to hold the ball in place while torqueing the nut.
view full answer...
- Recommended Weight Distribution Hitch for 2019 Toyota Highlander Towing 2018 R-Pod 179The weight distribution hitch in the question you looked at was based on the loaded trailer tongue weight. It is impossible to find the right WDH based on the vehicle alone. It looks like your 2018 R-Pod 179 has a dry tongue weight of 292 lbs so based on the GVWR you're probably maxing out tongue weight around 400 lbs. To be sure, I recommend measuring your fully loaded tongue weight setup with a scale like the # e99044. Based on that information, the Fastway e2 # FA94-00-0600 would not...
view full answer... - What Size Socket is Needed for the Nut on the Curt 2 Inch Hitch Ball 40004The 2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 6,000 lbs # C40004 will use a 1-1/2 inch socket like # ALL643210 or a wrench. If you aren't using a torque wrench, you will need to make sure that lock washer is fully compressed to ensure that nut has been tightened enough.
view full answer... - Parts Needed To Add Electric Trailer Brakes to a 1997 Coleman Taos and Tow With a 2023 Kia SportageFirst you will need the etrailer Trailer Hitch Receiver # e38KR for your 2023 Kia Sportage. I recommend using the Fastway e2 Weight Distribution # FA92-00-0450 to connect your trailer. This will help reduce rear end sag while also helping to prevent trailer sway while driving on the highway. You will also need a 2" Hitch Ball # 40038 along with a 1-1/2" 12pt Socket # ALL643210 to fasten it to the hitch. For the electrical you will first need the Curt T-Connector Vehicle Wiring Harness...
view full answer... - What Size Socket is Needed to Torque Down Brophy 50mm Hitch BallThe Brophy 50mm Hitch Ball # EH53C-C uses a 1 inch UNF hex nut. I personally verified you'll need a 1-1/2 inch socket, like # ALL643210. The recommended torque spec for all trailer hitch balls with a 1 inch diameter shank is 250 ft-lb.
view full answer... - Recommended Weight Distribution Hitch and Brake Controller For 2017 GMC Acadia Factory Tow PackageYour 2017 GMC Acadia Denali with the factory V92 towing package is rated to tow a trailer up to 4,000lbs. This information is directly out of the owners manual for your Acadia. I do recommend using a weight distribution hitch like the Fastway e2 Weight Distribution # FA92-00-0450 with a larger trailer. This system will help to ensure that your Acadia rides level and you do not experience light steering from to much weight on the rear axle and that the trailer tracks straight with the inclusion...
view full answer... - Recommended Weight Distribution Hitch for Somerset E3 Pop Up CamperThat answer you looked at is a bit confusing and I think it gave you the wrong idea about weight distribution. A weight distribution hitch should not be selected based on your tow vehicle. The most important thing is making sure your loaded tongue weight falls into the tongue weight range of the hitch. I don't know what year or exact model you have but I'm guessing 268 lbs is the dry tongue weight. You will need to measure to see what your loaded tongue weight is, or at least find the...
view full answer...
- Recommended Weight Distribution Hitch System for a 2020 Toyota Sienna Hauling a 5 X 8 TrailerFirst you will need to ensure the class III receiver you have on your 2020 Toyota Sienna is rated for use with a weight distribution hitch. As an example our etrailer Receiver # e98837 can be used with weight distribution while the etrailer Receiver # e98853 can not. This is due to the construction of the hitch. The Fastway e2 Weight Distribution # FA92-00-0450 is rated for a trailer up to 4,500lbs with a tongue weight up to 450lbs. Be sure to not exceed any weight ratings for your Sienna...
view full answer... - Can Weight Distribution Hitch Be Used During 90 Degree Turns and Backing UpBacking up may or may not be allowed depending on the weight distribution hitch you decide to get. However, no WDH is going to allow you to make full 90 degree turns. The spring bars may come out, or the system may end up damaged, so you would need to disconnect the spring bars if you make a turn that sharp. This isn't an issue with most driving conditions, and in a lot of cases you can be careful and make a wider turn to avoid it. It sounds like you might have some specific conditions...
view full answer... - Reducing Suspension Sag On a 2015 Santa Fe Sport While Trailer TowingI have a couple options for your 2015 Hyundai Santa Fe Sport. First is the Coil SumoSprings Custom Helper Springs # CSS-1125R which will increase the stiffness of your springs by 30%. This will help to reduce the sag you are experiencing both with trailers and if you load heavy objects into your Hyundai. For a more adjustable system you can look at the Firestone Coil-Rite Air Helper Springs # F4170. These will allow you to adjust the air pressure in your springs so you can dial in your...
view full answer... - Do I Need A Weight Distribution System To Tow A 2400lb Camper With My 2012 Jeep Wrangler?Anytime your gross trailer weight is more than 50% of your vehicle's weight or if the rear of your vehicle sags when the trailer is hooked up you will want to use a weight distribution hitch. Since your camper weighs 2400lbs and is more than 50% of your 2012 Jeep Wrangler's estimated curb weight of 3760lbs, it is definitely recommended to use a weight distribution system. I recommend going with Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 4,500 lbs GTW, 450 lbs TW...
view full answer... - What Size Wrench Do I Need For Ball Mount BoltsI can help you with this process. In addition to the wrench, you will need a torque wrench. Many of these ball mounts will have fairly high torque specs. If you have a hitch ball with a 1-1/4" shank, you will need a 1-7/8" wrench and a socket like the 1-7/8" 12pt Thin Walled Socket - 3/4" Drive - Chromium-Vanadium Steel, part # ALL643216. If you have a hitch ball with a 1" shank, you will need a 1-1/2" wrench and a socket like the 1-1/2" 12pt Socket - 3/4" Drive - Chromium-Vanadium Steel,...
view full answer... - Will Fastway e2 or Blue Ox TrackPro Weight Distribution Help Level Trailer With 330 lb Tongue WeightIt will; what is happening is the tongue weight is creating the "V" you mentioned, so you are not towing level, and a weight distribution system is exactly what you need. This will level you out, and for your 330 lb loaded tongue weight, you do have the correct Fastway system: - Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA92-00-0450 The # FA92-00-0450 will correct the "V" and ensure your Jayco is level, and even though you mentioned you didn't have sway on your last trip,...
view full answer... - Availability of a 1-1/2 Inch 12 Point Socked with 3/4 Inch DriveGood news! I was able to find the 1-1/2 inch 12pt socket with the 3/4 inch drive made of chromium-vanadium steel construction. The part number you are looking for is # ALL643210.
view full answer... - How To Install The Fastway E2 Weight Distribution System FA92-00-0450The Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA92-00-0450 comes with a shank that is 8" From center of hitch pin hole to center of adjustment holes, which is about the max length that your 2021 Tesla Model Y allows for according to what the manual told you. Also, since the manual says that it only allows for up to 0.75" rise, you will not need a different shank as this has a max rise of 6" and max drop of 2". If the 0.75" rise is not enough to level your trailer, then it...
view full answer...
- What Size Wrench/Socket Fits Nut of Curt C40004The 2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 6,000 lbs # C40004 you referenced will use a 1-1/2 inch deep well socket.
view full answer... - Recommended Weight Distribution Hitch For V-Nose TrailerThank you for providing that picture and measurement. Based on what you have there there is definitely enough room to install a weight distribution hitch. I recommend the Fastway e2 which will require placing the brackets 27-30" back along the frame, leaving you with room to spare. The correct system will depend on the tongue weight of your loaded setup. The best way to find this is to measure with a scale like the # e99044. I have also attached an article below which covers other ways...
view full answer...
- Is Fastway e2 Weight Distribution Hitch Good for 1,200 lb Camper TrailerThe Fastway weight distribution systems are a fantastic option for your 2014 Jeep Wrangler towing a small camper trailer and exactly what I would recommend for towing a light 1,200 lb camper trailer. With that weight, the correct Fastway system is the Fastway e2 Weight Distribution with 2-Point Sway Control # FA92-00-0450. What the Fastway hitch does is give you the most value out of a weight distribution hitch. It combines high-quality leveling and sway control but at a better price than...
view full answer...
Do you have a question about this Hand Tool?
Info for this part was:
Installed by:
Jeff D
Written by:
Laura H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.