Availability of a 1-1/2 Inch 12 Point Socked with 3/4 Inch Drive

Question

Question:

Do you carry this same socket in the 1 1/2 inch size? Thank you

asked by: John K

0

Expert Reply:

Good news!

I was able to find the 1-1/2 inch 12pt socket with the 3/4 inch drive made of chromium-vanadium steel construction.

The part number you are looking for is # ALL643210.

expert reply by: Jackie C

0

Answer 1

The Brophy Ball Mount #BM20 and the Brophy #BH20 referenced in your question are extremely similar to each other. They are both designed for 2 inch trailer hitch receivers, have a 10,000 pound towing weight capacity, feature a long, 13-1/4 inch shank…

view full answer...

Answer 2

Yes, you can use the VueSMART RV and Trailer Backup Camera part #HM34FR on your 2022 Keystone Cougar 5th Wheel. That said, I looked up some photos of the upper rear center clearance lamps and they are oval, not rectangular like what the above offers…

view full answer...

Answer 3

The Hopkins VueSMART RV and Trailer Backup Camera - Wireless - Universal Mount - 152-Degree View #HM34FR does require 12v power. You simply will connect into the tail light/running/clearance light circuit for power. I will send you a link to the…

view full answer...

Answer 4

The VueSMART RV and Trailer Backup Camera part #HM34FR is very customizable, it can be adapted to fit any application. I have attached a photo which shows a simple modification that can be made to change the style of mounting bracket. The camera can…

view full answer...

Answer 5

Since you don't have to install the VueSMART RV and Trailer Backup Camera #HM34FR behind a clearance light you could install this just above or below your round marker light and it will function fine.

view full answer...

Answer 6

So based on the picture you submitted and the dimensions you listed it looks like you need a dump valve that will fit into the 3-1/2 inch pipe (3 inch spigot) and then need a 1-1/2 inch pipe ot fit over your other valve (1-1/2 inch hub). The valve…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

Thanks for the picture of your trailer light lens. Based on seeing that we do know that the part #OPT47FR is the correct replacement.

view full answer...

Answer 9

The max psi for a trailer tire should be used at all times and should be inflated to when the tire is "cold" or first thing before any towing. Any pressure fluctuations from heat that builds up on the highway would be fine as long as you…

view full answer...

Answer 10

Have you tried tapping the bolt in with a hammer? Hopefully not much force would be needed. Ideally you get the splines seated all the way but then you don't have to really torque the nuts down as the bolt needs to allow the suspension to move.…

view full answer...

Answer 11

In general shackle bolts turning from use over time does not considerably wear out components. As long as the bolts are greased normally the movement from standard use would not cause them to wear out. The tension of the bolt and nut is loose enough…

view full answer...

Answer 12

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

view full answer...

Availability of a 1-1/2 Inch 12 Point Socked with 3/4 Inch Drive

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching