What Size Socket is Needed to Torque Down Brophy 50mm Hitch Ball

Question

Question:

I need to know the size of the nut so that I can organize the right socket please.

asked by: Juan M

0

Expert Reply:

The Brophy 50mm Hitch Ball # EH53C-C uses a 1 inch UNF hex nut. I personally verified you'll need a 1-1/2 inch socket, like # ALL643210. The recommended torque spec for all trailer hitch balls with a 1 inch diameter shank is 250 ft-lb.

expert reply by: Carla M

0

Answer 1

Unfortunately we do not have an adapter to go from a European 13-way trailer connector to a U.S. style 4-way trailer connector. European trailers typically have separate brake light and turn signal circuits, but U.S. trailers use a combined wiring…

view full answer...

Answer 2

I have a solution but the Weigh Safe 180 Hitch 2-Ball Mount #WS54FR will not work with this because most European Bike Racks require a 50mm ball to attach to. The two included balls with Weigh Safe ball mount are not the correct size. Also, this ball…

view full answer...

Answer 3

In addition to the 50 mm Hitch Ball - 3/4" Diameter x 1-1/2" Long Shank - Chrome - 3,500 lbs #63912, you'll need a ball mount with a 3/4" ball hole diameter. If your 2018 Forester has a 1-1/4" hitch then you'll want to use…

view full answer...

Answer 4

The ball mount you purchased was part C45572 and this is for a 1-1/4-inch Class II hitch. This ball mount has an integrated 2-inch hitch ball that cannot be removed and this is why it is incompatible with the towing style bike rack that I believe you…

view full answer...

Answer 5

I may have an option for you. For the Draw-Tite Trailer Hitch #24824 you have installed on your 2011 Volkswagen Eos Draw-Tite recommends the Drawbar #3594. Now when it comes to a hitch ball you will likely need the 50mm hitch ball #63912 as this is…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

What Size Socket is Needed to Torque Down Brophy 50mm Hitch Ball

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching