Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Using a 100-watt solar panel and solar controller, this RV charging system provides an extra boost to your RV batteries while you're on the road. Controller regulates and monitors power output while preventing harmful overcharging.
Features:
Specs:
If you are an energy-conscious RV owner, the Go Power Retreat solar charging system provides clean, renewable power and an extra boost to your batteries while you are on the road. This kit comes with everything you need to charge your RV batteries with sunlight. Using a solar panel, this system collects solar energy to create DC power that passes through a solar controller to charge your RV batteries.
The charging process starts with the solar panel, which installs on the roof of your RV. When solar energy interacts with the silicon cells in the panel, it generates a flow of DC electrical current that charges your RV's batteries. Each of the monocrystalline cells is made from a single crystal of silicon, so the electrons that create the current have more space to move, making this panel more efficient than one with polycrystalline cells. And in optimal sunlight conditions, the panel produces 100 watts per hour.
The silicon cells are set between a cushioned backing material and tempered solar glass to withstand the elements. The glass has low-iron content to provide exceptional transparency, which ensures maximum sunlight collection. Finally, the panel is framed with anodized marine-grade aluminum to resist rust and corrosion.
An adjustable mount kit (sold separately) can increase your solar panel performance by angling it for maximum sun exposure. This kit replaces the panel's existing brackets and allows it to tilt at 3 different angles. This also improves solar charging during winter months when the sun is lower in the sky.
The solar controller prevents harmful overcharging by adjusting the power generated by the solar panel before it reaches your batteries. It uses pulse width modulation technology to regulate the output through pulses that provide a consistent charge. Typically, this type of technology is a good fit for smaller systems with lower voltages.
Using a multistage charging system, the controller automatically switches voltages while the battery bank charges. This accelerates the charge, but also helps extend battery life by adjusting the voltage during the different modes. The controller is compatible with multiple battery types and includes preset charging profiles for sealed/gel, AGM, flooded/wet cell, and lithium batteries.
Charging Modes
With Maximum Power Boost Technology, you can simply press a button to activate Bulk mode for the highest charging voltage. This lets you quickly top off your battery bank before the end of the day by capturing as much power as possible.
This solar controller is built to charge two battery banks and has terminals for a primary and secondary battery. Your primary battery will receive the full current until it is completely charged. Then, your secondary battery will start to draw the charge current.
The backlit, digital display acts as an information center for your solar panel output. It shows the charging current, battery voltage, and battery state of charge. It also allows you to input your battery type and choose a charging profile. Additionally, a built-in USB port on the front of the controller provides a convenient outlet to charge your cell phone or tablet.
It includes a Bluetooth function that lets you connect the controller to your smartphone or tablet with the free Go Power! Connect app. With this app, you can wirelessly view the same live battery information included on the display. Also, you can control your battery profile and toggle Maximum Power Boost Technology mode.
Lastly, the controller includes several built-in safety features to help protect your equipment. The charging process will shut down if the controller starts to overheat and when an overcurrent is detected. Also, if the battery or solar panel is wired incorrectly, it activates a reverse polarity alarm.
The system includes a 100-watt solar panel, a 30-amp PWM solar controller, MC4 cables, and all the necessary installation hardware.
Note: This kit may require more wiring and additional parts depending on your RV setup.
Solar panel:
Solar controller:
Alternate Instructions
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (16 Customer Reviews)
Using a 100-watt solar panel and solar controller, this RV charging system provides an extra boost to your RV batteries while you're on the road. Controller regulates and monitors power output while preventing harmful overcharging.The description says that it will charge two sets of batteries, but there is only one output. Shouldn't there be two outputs on the controller? The instructions say to wire the two sets of batteries in parallel, and if I did that, then both batteries will be used for starting the engine and running the chassis. That is NOT the intended purpose of the separate batteries.
Very easy install for DIY project, took about two hours start to finish with prewired for solar on my r-pod. Another two hours charging and battery 100%. Love it so far and am going to install inverter next for off grid watching tv (golf) LOL. Thank you E-trailer for technical support. I have been using you guys for years and always satisfied.
I plan to do more dry camping and this will allow me to keep the generator use to a minimum. It took me about three hours to install. The instructions were clear and understandable. I also like that I can add more panels in the future.
I bought a medium size unit and my class c Motorhome had pre wired from the roof and it had helped a lot, the unit is kept in a parking warehouse, with no access to any power outlet , this unit keeps the house battery all charge up
Excellent product! Batteries are always charged no matter what our usage. We'll be looking at installing this or similar system to our off grid cabin.
The solar panel was delivered in excellent condition. The ups driver told me that he made sure that the box would not have any damage while it was in the truck. The delivery was on time and I will continue to use etrailer for my rv needs.
excellent product, easy to install
Thomas O.
5/20/2021
perfect
Easy to install!! Fast free shipping!!
Do you have a question about this RV Solar Panel?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
1/16/2024
Im sorry for any confusion. The controller GP-SB-PWM-30 [the controller included in this kit] will only charge one battery bank. The bank can be made of more the one battery, but the controller will only charge one battery bank. The older GP-PWM-30-UL is capable of charging two separate battery banks and does have additional connectors on the back for that. The GP-SB-PWM-30 comes with all the new kits. The SB in the part number is for single bank.