Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
(113 reviews)
Price: $110.30
In Stock
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
Item # AKHD-550-35-EZ-K
Our Price: $110.30
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (113)
- Q & A (0)
- Photos
etrailer by AxleTek Trailer Hubs and Drums - AKHD-550-35-EZ-K
- 5 on 5 Inch
- For 3500 lbs Axles
- Hub with Integrated Drum
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Easy Grease
- EZ Lube
- Pre-Greased
- 1/2 Inch Stud
- L44649
- L68149
- etrailer
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Dexter E-Z Lube and etrailer Easy Grease-compatible grease cap makes lubricating bearings fast and easy
- Remove rubber plug to access zerk fitting on spindle - no need to disassemble hub
- Sturdy iron construction
- Zinc-enriched paint on drum adds durability
- Zinc-finished bolts resist corrosion
- Pre-greased hub-and-drum assembly is easy to install - no need to pack bearings
- Lithium complex, multipurpose grease keeps bearings lubricated
- Bearings, races, grease seal, grease cap, and lug nuts are included
- QAI and CSA certified
Specs:
- Application: 3,500-lb Dexter E-Z Lube and etrailer Easy Grease trailer axles with #84 spindles
- Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
- Actual drum dimensions: 10-15/16" diameter x 2-5/8" wide
- Works with 10" brake assembly
- Bolt pattern: 5 on 5"
- Wheel studs: 1/2" diameter x 1-1/4" long
- Grease cap flange diameter: 1.99"
- Weight capacity: 1,750 lbs
- Limited 1-year warranty
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 58846
- Inner diameter: 1.719"
- Outer diameter: 2.565"
Thoroughly Tested for Safety
This hub-and-drum assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This assembly underwent extensive testing to measure stopping distances when braking. This assembly has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.
E-Z Lube and Easy Grease-Compatible Assembly for Simple Lubrication
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube or etrailer Easy Grease axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
KBD2-550-19 AxleTek 10" Trailer Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 5 - EZ Lube - Pre Greased
Compare to Dexter 84556UC3-EZ
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Alternate product found
Customer Reviews
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased - AKHD-550-35-EZ-K
Average Customer Rating: 4.6 out of 5 stars (113 Customer Reviews)
Hub-and-drum assembly for your trailer. For electric or hydraulic brakes. Fits 3.5K Dexter E-Z Lube and etrailer Easy Grease axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.by: Pat S05/05/2024
My gosh i will never try to fix another trailer hub again. You folks saved me time and money. New hub slid right on the spindle, all greased and sesls installed. Parts alone would have been more than the new hub from you. I like anything that makes my life easier
by: Nick H.08/12/2022
They made for an easy install on a tandem trailer, whose idler axle I upgraded with brakes, once I had the proper size (5 on 5). The first set were mislabeled & contained the wrong size (5 on 4.75). etrailer promptly sent proper replacements and a call tag for the improper ones.
by: Ronnie W12/05/2016
Thanks George for the service, the 10 inch hub-drum and the 7 pin plug made the trailer rebuild much better. Your company is by far the best I have ever dealt with, I can't say enough about the fast shipping and the quality of your products. I will be ordering more hud- drums for another trailer soon,again thanks.
by: Russell P.08/12/2016
Converted Carson trailer front idler axle to electric brakes. Parts fit excellent.
Customer service was superb even when I ordered wrong part.(my fault) The return of wrong part was handled very professional. Very happy with Etrailer parts quality and employees.
by: Maxfrancis12/03/2019
These were great and came with bearings, dust seals, and new lugz. My old ones seemed a little warped. Nice paint on the outside, time will tell if it stands up to snow and salt.
by: Lionel10/06/2022
The drum fit perfectly but the package was kind of banged up.
by: Matthew 06/15/2019
No problem with them thus far. Straightforward install with the bearings, races, and drums.
by: Douglas05/25/2023
I ordered the wrong parts from another vendor without even knowing it. Once I found my mistake I called the fine people at etrailer and explained what I had done. They walked me through a few steps and had exactly what I needed. Thank you very much.
by: Jeff04/24/2022
Exact replacement of OEM hubs
Jeff
4/25/2023
The hubs fit right the first time and have worked flawlessly.
by: Tyler03/25/2023
Awesome communication, quality parts, my go to for everything trailer related. I recently ordered a few small axle parts from Amazon and was sorely disappointed, etrailer quality is night and day difference.
by: Brian03/16/2020
Product came fast. Everything that came with it was exactly as stated and fit perfectly. Thanks again to Derek for all his help and tech support.
by: Harold06/10/2020
Actually ordered the wrong bolt pattern but was pleasantly surprised by etrailer’s assistance regarding the return of the wrong hub/drum assemblies as well as the purchase of the correct ones. Great Customer Assistance!
These pregreased hub & drum assemblies are a great product making replacing these parts a breeze! Comes with pregreased bearings and seals in place ready to be installed. Couldn’t be easier!
Thanks etrailer!
Harold
6/10/2021
1 year later and still working Great!
by: Mike & Brandon11/25/2022
Outstanding customer service with Jesse M. My son and I placed a order for a complete axle with drums and electric breaks for a 3500 lbs rated 5 lug wheel, it was delivered the next day. We took it to our farm 150 miles from home to do the repair every thing went fine till we go to the drums wrong size. They were 5-4 1/2 and we didn’t no there is three.various sizes called Jesse and he told us how over the phone how to measure drum problem is we had tape measure and wasn’t sure of the exact measurements. Got the next size drum 5X4 3/4 guess what didn’t fit ether and another call to Jesse who sent us an email with a printable wheel drum template cut it out and solved our problem this time we brought the wheel and drum with us home and used the template fit like a glove 5X5. Jesse sent returned authorization form sent both sets drums back through UPS of credit to my account and Jesse waved the last return shipping charge. It doesn’t get any better than that folks and as soon as we head back to farm to install I’m going to call Jesse to thank him again. Thanks
by: Waldemar01/25/2023
It was a fairly easy installation. I've used the trailer a few times and it seems to be working perfectly.
by: Ken L.01/18/2020
Installed four sets of these hubs and drums, along with new electric brakes, as part of a total trailer refurb a year ago. Had some challenges early on with one wheel overheating, but solved it with the help of etrailer's excellent tech support. Since then everything is fine and I couldn't be happier.
Ken L.
1/19/2021
Initially I had some issues with one of the drums getting very hot when driving. So, I contacted customer service, and with their help I was able to rectify the situation. Since then everything is working just fine. Thanks for being a first-class organization who cares about the customer.
by: Steve B09/05/2022
Everything arrived in great shape. All the parts ordered worked fantastic. Spent a Saturday getting trailer rebuilt and back on the road-new axel-brakes-drums. Everyone at e-trailer were very helpful
by: Ron R.10/27/2020
The hub and drum assemblies fit well and there was no damage so everything went together nicely. What I have come to expect from etrailer.com!
Ron R.
10/27/2021
They arrived when promised undamaged and ready to install. Have used them a lot and have had no problems. Very pleased!
by: Corey M.07/23/2019
My original purchase was for a new weld on spindle with new drum/hub assembly with bearings for the other 3 wheels. I measured the wheel pattern wrong and by the time I had realized this I had installed everything. I reached out to etrailer for help and thanks to Hally C. she was able to remedy my issue with the right parts in about two days with little trouble at all. Thank you to etrailer for technical assistance and speedy delivery of new parts. Advice to anyone ordering hubs and drums remember the old saying about carpentry, measure twice and cut once, (in this case measure twice and order once) or you'll be like me and now own a hub/drum that's sitting on your shelf collecting dust because you don't own anything it fits (yet lol)!
by: CNico09/24/2019
The unit came well packed originally and was easy to install. Have used 22' tandem axle to haul mixed loads up to 5000 lbs at least 2 a month since rebuilding it completely and have had no problems stopping. only issue is lost a grease cap plug recently
by: Frank strivklin08/24/2017
I got the wrong size brake drums because I measured improperly but other than that everything was fine. I added brakes to a trailer that had none. . I had to re-order the right size and now my trailers on the road. My recommendation is to take your wheels down to your local tire dealer and have them measure the lug diameter with their gauge before you order.
by: Scott P06/22/2017
Excellent customer service. A few contents were missing from the trailer brake assy. Contacted ETrailer and the friendly customer service rep was more than helpful to be sure that I received my missing parts. Will definitely purchase again through ETrailer. Thanks again.
by: Robert02/02/2018
Ordered a trailer Drum kit (5 by 5)... came at fair price, I am very pleased.. Shipping was fast and low cost (3 day priority) and was actually here in 2 days (bonus points) The drum coming with the race already pressed in was a huge help to be as I live way out in the sticks and am limited on tools . I will for sure use etrailer again should I need more parts to keep my landscape business going...Thank you
by: Daniel06/03/2021
Added brakes to the second axel of my utility trailer. This hub with pre-greased bearings make it soooo easy.
by: Jeff07/25/2020
Great service and follow up, parts arrived packaged and un damaged after long trip and multiple warehouse/truck transfers. Tracking was spot on so I could plan to put parts on trailer the day they arrived. Hub and bearing assy is the way to go, slide them on and torque up.
25
113
Show More Reviews
See what our Experts say about this etrailer Trailer Hubs and Drums
- Electric Brake and Hub/Drum Assembly Recommendations for a 3,500 lb AxleThank you for the information! For a 3,500 lb axle you need the 10" Electric Trailer Brake Kit # AKEBRK-35-SA which mounts using 4-bolts. Then for for the hub side of things you need the Easy Grease Trailer Hub and Drum Assembly # AKHD-550-35-EZ-K which has a 5 on 5" bolt pattern and uses inner bearing L68149 and outer bearing L44649. If this matches what you have then you're good to go! Please note you'll need some 10 Gauge Wire # 10-1-1, Butt Connectors # DW05745-10, and a breakaway...
view full answer... - Replacement For A Dexter 8-249 Hub And Drum AssemblyTo replace your Dexter 8-249 hubs, I recommend using the Easy Grease Trailer Hub and Drum Assembly # AKHD-550-35-EZ-K. This is the Axle-Tek brand equivalent of your Dexter 8-249 hub/drum. The hub will include your bearings, seals, races, grease cap and lug nuts.
view full answer... - Recommended Hub And Drum For A Trinton Trailer When it comes to replacing the hub and drums on your Trinton Trailer I recommend the following depending on what your bolt pattern is: The Dexter Trailer Hub and Drum Assembly for 3,500-pound Axles - 10 inch Diameter - 5 on 4-1/2 # 84546UC3. The Trailer Hub and Drum Assembly - 3,500-pound Axles - 10 inch Diameter - 5 on 4-3/4 - Pre-Greased # AKHD-5475-35-K # The Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10 inch - 6 on 5-1/2 - Pre-Greased # AKHD-655-35-EZ-K The Trailer...
view full answer... - 5 on 5 or 5 on 4-3/4 Lug Pattern? How to Determine Which You HaveI would be happy to help you. The second 5 in the Easy Grease Trailer Hub and Drum Assembly item # AKHD-550-35-EZ-K 5 on 5 pattern is referring to the placement of the lug studs. Since yours are 2-3/4 center to center you will need a 5 on 4-3/4 pattern. The Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-3/4 item # AKHD-5475-35-EZ-K are identical to the ones you were looking at and fit the same spindle size. The only difference is they have the 5 on 4-3/4 lug pattern...
view full answer... - Recommended Timbren Axle-Less Suspension with 4 Inch Lift and 5 on 5 Bolt Pattern for Jeep TrailerThe Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle - Regular Tires - 3,500 lbs # ASR3500S06 is what you would want to start. If you will be using off-road or wide tires, then you will want # ASR35HDS02 instead. Then you will use hubs that have the # L68149 inner bearing and # L44649 outer bearing. For your 5 on 5 bolt pattern I recommend the Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 5 - Pre-Greased # 84550UC1-EZ or the etrailer.com # AKIHUB-550-35-EZ-K....
view full answer... - Timbren Axle-Less Trailer Suspension Compatibility with Jeep 5 on 5 Bolt PatternFor your Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs # ASR35HDS02, we do not have anything that will work in a 5 on 5 inch hub. Those spindles on the Timbren use a larger than normal hub for the capacity. You would need to use the Dexter Trailer Hub and Drum Assembly - 12" - 6 on 5-1/2 bolt pattern # 8-201-9UC3-EZ for that axle using brakes or # AKIHUB-655-6-EZ-K for an idler hub. For the Timbren Axle-Less kit compatible with the...
view full answer... - Hubs & Brake Kit Required For Timbren 3,500LB Axle-Less Trailer Suspension For 5 on 5" Bolt PatternThe Timbren Heavy-Duty Axle-Less Trailer Suspension # ASR35HDS05 you are looking at increases the spindle size to the larger #42 spindle. This will require a larger Hub Assembly # AKHD-655-6-EZ-K and the smallest bolt pattern offered in that size is a 6 on 5-1/2". If you go this route you will need 2 of the above hubs with the Brake Kit # AKEBRK-7-SA. To go with 5 on 5" hubs you will need to get the Timbren Axle-Less Trailer Suspension System # ASR3500S06 which uses the #84 spindle that...
view full answer... - What Is The Smallest Wheel Size Compatible With 3500lb Axle Hub and Drum Assemblies?I have another wheel size that will work, but there are not any hub and drum assemblies for your 3500lb axle that will work with 10" wheels. For 3500lb axles you need 10" braking assemblies # AKEBRK-35-SA and 10" hub and drum assemblies # AKHD-550-35-EZ-K. The smallest wheels that will fit with these are 13" in diameter, though all of our 13" tires have a load rating under 1750lbs each so you will need to step up to 14" wheels and tires unless you can find a suitable 13" tire. I recommend...
view full answer... - Compatible Axle Components for Timbren Axle-Less Trailer Suspension # ASR2KHDS02The Timbren Heavy-Duty Axle-Less Trailer Suspension - Straight Spindle - Wide Tires - 2,000 lbs # ASR2KHDS02 will work well with hubs # AKHD-550-35-EZ-K. They will also work well with the Dexter Electric Trailer Brake Assembly w/ Parking Brake - 10" - Right Hand # K23-087-00 and Left Hand # K23-086-00. I recommend the Titan Breakaway and Parking Kit for Drum Brakes # T2385200 for the parking break connection to your assemblies. This is not a direct fit as it is intended for Titan hydraulic...
view full answer... - Timbren Axle Less Kit Recommendation With Jeep Bolt Pattern, Lift, and Brake/HubsThe Jeep wheel bolt pattern is 5 on 5 inch which we do have a way to accomplish what you are wanting. For a hub that has a 5 on 5 inch bolt pattern to fit the spindles of the Timbren axle less kit part # ASR2KHDS03 you would want the Trailer Hub part # AKHD-550-35-EZ-K. This hub includes the bearings that the Timbren is designed to fit. This setup has a 4 inch lift and the hubs have the 5 on 5 inch Jeep bolt pattern. Then for self-adjusting brake assemblies you'd want the part # 23-469...
view full answer... - Replacement Brakes, 5 on 5 Hubs And Bearings For A Lippert 3,500 lb AxleHello Eric. The Lippert 3,500 lb axles use standard sizing for the brakes, hubs and bearings. So, the Dexter parts you see on our site are absolutely interchangeable. The Dexter Electric Trailer Brakes that you were looking at will be exactly what you need. We can also hook you up with bearing kits and the 5 on 5 hubs. I recommend the following: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K # 23-26-27 Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles -...
view full answer... - 3.5K Axle Upgrade for Off-Road TrailerTo upgrade your axles to 3,500 lbs I recommend the Timbren Axle-Less Suspension System # ASR3500S06. This system has a 4 inch lift that will help to give you ground clearance when you go offroad. The etrailer.com Trailer Hub and Drum Assembly, part # AKHD-550-35-EZ-K, is compatible with this axle-less system and will give you that 5 on 5 bolt pattern that you were asking about. Keep in mind that your trailer weight capacity is limited by your lowest rated piece of equipment. Even if...
view full answer... - Off Road Timbren Axle Less Recommendation that Can Be Used with Jeep Bolt PatternThe part # ASR35HDS02 only has hubs with 6 lug patterns and up since it's a higher rated system. It's odd because the axle is 3,500 lb rated but designed for 6k rated hubs. Isn't the 5 lug pattern you mentioned the Jeep bolt pattern? Typically the Jeep wheel bolt pattern is 5 on 5 inch. For an idler hub that will fit the spindles of the part # ASR1THDS03 and have the correct bolt pattern we have the # AKIHUB-550-35-K. This is a 3,500 lb trailer hub. For a hub drum we have the # AKHD-550-35-EZ-K. The...
view full answer... - What Trailer Hub Would I Need For My 3500 Pound Axle With 5 On 5 WheelsI recommend the Easy Grease Trailer Hub and Drum Assembly # AKHD-550-35-EZ-K. It is rated for a 3,500 pound axle and has the 5 X 5 bolt pattern. They're pre greased which means that all bearings and races and seals are already inserted into the hub and drum when you receive it. The wheel studs are 1/2 inch diameter x 1-1/4 long. All pieces are include with the # AKHD-550-35-EZ-K. An installation video is below showing some more specs on the hub and drum.
view full answer... - Parts Needed To Add Electric Brakes To a 2010 SeaDoo Challenger 180 Boat TrailerIn order to add electric drum brakes to a 2010 SeaDoo Challenger 180 Boat Trailer you will need the following: Electric Trailer Brake Kit part # AKEBRK-35-SA Trailer Hub and Drum Assembly part # AKHD-550-35-EZ-K (2) Trailer Wiring 7-Way Upgrade Kit part # HS381-9000 Hopkins Engager Push-To-Test Trailer Breakaway Kit part # 20099 Tekonsha Primus IQ Trailer Brake Controller part # TK90160
view full answer... - What Hubs Would Work With The etrailer Axle # e63GRThe Trailer Axle Beam with Easy Grease Spindles - 95" Long - 5,200 pounds # e63GR has an inner bearing # 25580 and the outer bearing # 15123 will have a 6 by 5-1/2 bolt pattern. The Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased # AKHD-655-6-EZ-K will match up perfectly with the 5,200 to 7,000 pound axle # e63GR. The Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 pounds # e38GR has an inner bearing # L68149 and the outer...
view full answer... - Is There 3,500 lb Trailer Axle With 89 Inch Hub Face Length & 5 on 5" HubHello 89 5, We do have a 3,500 lb axle with 89 inch hub face to hub face and 74 inch spring center to spring center that will work with a hub that has a 5 on 5" bolt pattern, but the hub just needs to be purchased separately as they don't come in a single package. You can choose from either a hub and drum or idler hub and here's what you'll need: - Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs # T3584F-EZ-8974 - Easy Grease Trailer Hub and Drum Assembly # AKHD-550-35-EZ-K OR -...
view full answer... - Replacing Hubs And Drums And Electric Brakes On A Carson Trailer When replacing the hubs and drums and knowing that your inner bearing is # L68149 and your outer bearing is # L44649 then The Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10 inch Diameter - 5 on 5 - Pre-Greased # AKHD-550-35-EZ-K is the correct set up for you. The inner and outer bearing, the inner and outer races and the grease seal is all included per hub and drum. The hub has a bolt pattern of 5 on 5 inches, and the wheel studs are 1/2 inch diameter by 1-1/4 inch long....
view full answer... - Replacement Trailer Hub and Brake Assemblies for AL-KO 8500 Hub/DrumFor a 3,500 lb hub/drum replacement that will work well to replace your AL-KO 8500 you'd want the hub part # 84546UC3-EZ which fits the spindle and has the 5 on 4-1/2 inch bolt pattern you need. For brake assemblies then the Electric Brake Assembly kit part # AKEBRK-35 would be what you need.
view full answer... - Comparing 3,500 lb Dexter and etrailer Axle Hubs for Trailer with 5 on 5 inch Bolt PatternAll of the hubs you mentioned are correct for your application as they are for 3,500 lb axles with a 5 on 5 inch bolt pattern like you need. The brake assemblies part # 23-468-469 would also work with them all as well. So the Dexter brand is widely considered to be the highest quality so that would explain why they cost more. The Dexter hubs # 84556UC3-EZ have the EZ lube grease cap that allows you to access the grease fitting by pulling off the rubber plug. The part # 84556UC3 is exact...
view full answer... - Replacement Hubs With 5 on 5 Bolt Pattern for M116A3 TrailerThis is possible assuming the bearings match up with the spindle on your current axle. All of our idler hubs and hub and drum assemblies with a 5 on 5 bolt pattern use a # L44649 outer bearing and # L68149 inner bearing. You will need to either find the part numbers on the existing bearings or measure your spindle to see what you have. Assuming these match up we have several options. If you are looking for a hub and drum assembly we have the # AKHD-550-35-K or the # AKHD-550-35-EZ-K for...
view full answer...
- Replacing Old 3 Bolt Trailer Brake Assembly on 3500 lb AxleThe only 3500 lb brake assemblies we offer are compatible with a standard 4-bolt backing plate, which leaves you with a few options. If you can find somebody local that's familiar with trailer axle work, you can have the existing brake assembly mounting flange removed and a new one welded in place. A 3500 lb axle typically has a 2-3/8 inch diameter axle tube. If that's the case with your axle, you'd want to use # 4-35. The mounting flanges need to be welded in place so they're perfectly...
view full answer...
- Trailer Hub with 5 on 5 Bolt Pattern to Use with Timbren Axle-Less System # ASR2KHDS03You sure can! To use with the Timbren Heavy-Duty Axle-Less Trailer Suspension System # AKHD-550-35-EZ-K I recommend the etrailer.com # AKHD-550-35-EZ-K for a hub and drum assembly or # AKIHUB-550-35-EZ-K for an idler model (if you won't be adding brakes). Both options will fit the spindles of the Timbren system perfectly and provide the needed 5 on 5 inch bolt pattern. If you are adding brake assemblies I recommend the etrailer.com Self-Adjusting Electric Brake Kit # AKEBRK-35-SA, which...
view full answer... - Replacement Hub/Drums for 3500 Axle With 5 on 5 Bolt PatternFrom what I found online, a 2020 Jeep Wrangler and Grand Cherokee use a 5 x 127mm bolt pattern, which is equivalent to a 5 on 5 bolt pattern like the # AKHD-550-35-EZ-K hub/drum you'd looked at. A 3500 lb axle will typically use a L8149 inner and L44649 outer bearing which is compatible with that hub, so the hub should work with your spindles as well as wheels that will fit your Wrangler or Grand Cherokee. You'll want to check the diameter of your spindle where the grease seal rides to...
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Randy B
Video by:
Jacob T
Video by:
Kathleen M
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Mike S
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Lionel
10/7/2023
Everything is working perfectly! Thanks!