Electric Brake and Hub/Drum Assembly Recommendations for a 3,500 lb Axle
Question:
I recently bought an older 5x10 trailer. it appears to have a 3500lb axle based upon the bearings. I am considering putting electric brakes on it. the wheels/hubs are 5 on 5. Do you have a drum brake kit for this? the axle has backing plate flanges
asked by: John P
Helpful Expert Reply:
Thank you for the information!
For a 3,500 lb axle you need the 10" Electric Trailer Brake Kit # AKEBRK-35-SA which mounts using 4-bolts. Then for for the hub side of things you need the Easy Grease Trailer Hub and Drum Assembly # AKHD-550-35-EZ-K which has a 5 on 5" bolt pattern and uses inner bearing L68149 and outer bearing L44649. If this matches what you have then you're good to go!
Please note you'll need some 10 Gauge Wire # 10-1-1, Butt Connectors # DW05745-10, and a breakaway kit like part # 3802346 to complete your electric brake setup.
Attached are some videos and a helpful article on electric brakes for you to check out.
Products Referenced in This Question
Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Side Load
- Trailer Breakaway Kit
- Kit with Charger
- Side Load
- Single-axle
- Tandem-axle
- LED Tester
- 1 Amp Charger
- Battery Included
- 5 Ah
- Bright Way
more information >
Easy Grease Trailer Hub and Drum Assembly - 3.5K Axles - 10" Diameter - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Deka Heat Shrink Butt Connector - 12-10 Gauge - Nylon Insulation - Yellow - Qty 10
- Wiring
- Wire Connectors
- Butt Connectors
- 12-10 Gauge
- Deka
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Most Popular Wheel Bearings
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Parts Needed To Add Electric Drum Brakes To A Pontoon Trailer
- Q&A: Finding the Correct Electric Trailer Brake Assembly for Lippert Components 2800 lb Axle
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Q&A: Are New Brake Drums Required if Replacing Electric Brake Assemblies on a Trailer
- Q&A: Replacement Trailer Brakes for Dexter 023-217-00
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes