Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
(24 reviews)
Price: $175.69
In Stock
Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Item # 65048
Retail:$320.85
Our Price: $175.69
You Save: $145.16
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (24)
- Q & A (0)
- Photos
Draw-Tite Front Receiver Hitch - 65048
- Front Mount Hitch
- Custom Fit Hitch
- Draw-Tite
- 9000 lbs Line Pull
- 300 lbs Vert Load
- 2 Inch Hitch
- Square Tube
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
Specs:
- Line pull: 9,000 lbs
- Vertical load: 300 lbs
- Gross trailer weight: 3,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
65048 Draw-Tite Front-Mount Trailer Hitch Receiver
Replaces 65010
Installation Details
This Product Fits The Following Vehicles
- 1997 - 2006 Jeep TJ
- 1987 - 2003 Jeep Wrangler
- 2004 - 2006 Jeep Wrangler including Unlimited
- 1987 - 1995 Jeep YJ
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
Customer Reviews
Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" - 65048
Average Customer Rating: 4.5 out of 5 stars (24 Customer Reviews)
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Paul Gee08/23/2017
2002 Jeep Wrangler
Front hitch was received in a timely manner. The Hitch itself does not line up with the bumper of my 2002 Jeep Wrangler X. It is close but no cigar. Will have to make some type of adjustment to align the bolts. This I thought was a bolt on installation. Disappointed but will keep the hitch. Hitch is to be used to move trailers and to mount winch that can be used on the front or rear of wrangler.
by: Dwayne05/17/2023
2005 Jeep TJ
Perfect for what I need. Can adapt it for many different uses from winching, cargo carrying, bicycle carrier, or any other use my tinkering mind comes up with.
by: Caleb09/02/2023
1994 Jeep Wrangler
I received the hitch but no mounting hardware, also probably due to shipping a bunch of the powder coat is chipped let's see what customer support does and I'll get back to you all
by: Joshua 12/01/2023
1995 Jeep YJ
Easy bolt on and the side loops seem beefy enough to work as recovery points. I knocked a star off because the coating was flaking off to bare metal as soon as I removed it from the box.
by: Gregory 03/28/2024
2001 Jeep TJ
Well built. The only negative is they don't include the proper front bolts for a Jeep TJ. They included 1/2 SAE bolts but TJ's use all metric bolts. Needs two 12mm bolts. The rear bolts were metric and correct size.
by: Samuel 10/26/2022
Jeep
Fit perfect on 2002 Jeep SE, only took about 30 minutes to install. would took less time but my ratchet broke.....crappy modern Craftsmans tools. stay away from them
Samuel
10/27/2023
Works great, I use it for my fishing rod and cooler rack
by: R E02/01/2024
Jeep TJ
Perfect fit
by: Ernest05/24/2018
2003 Jeep Wrangler
Fast delivery and easy installation
by: Tim 01/03/2022
1990 Jeep Wrangler
I received it and it bolted right up to my 1990 Jeep Wrangler. I only needed to do a little trimming on the plastic cover which sits above the bumper to make sure it was down solid on the frame. I used my pneumatic cut off wheel to trim the plastic. It above the bumper so it is easy to attach my winch carrier.
by: Dave M.12/13/2016
1997 Jeep Wrangler
Received this hitch yesterday. Bolted up to my 97 Wrangle with no problems. Fit and finish is perfect. I plan to use it mainly with an aluminum hitch hauler for some extra cargo carrying space. This thing is very solid and well built. The recovery hooks are a nice extra feature. I highly recommend this product to anyone looking for a front mount hitch.
by: Jeff Jackson12/15/2010
1998 Jeep Wrangler
Front Drawtite hitch for Jeep WranglerI ordered the Drawtite front hitch for my 1989 Jeep Wrangler and a hitch cover with a flag design. The product arrived promptly and the hitch went on quickly. The instructions provided by Drawtite were adequate, but the video posted by etrailer was excellent. I installed the hitch in about 30 minutes. The hitch cover was broken when I opened the box, but etrailer promptly sent out a replacement. I will definitely do business with etrailer again.
by: Bill 03/11/2023
Very easy to install lined right up as advertised good an sturdy
by: Jeff 10/14/2022
1998 Jeep Wrangler
I was impressed with how fast and easy it was to receive the hitch that I ordered! Very pleased!!
by: Marty 04/10/2021
Jeep Wrangler
Bought this for my ‘03 Wrangler. Easy to install and works great for pulling, moving trailers around and installing my winch temporarily, when needed. My only regret is that I didn’t buy it sooner.
by: Steven 05/26/2023
Perfect fit
by: Steven 04/21/2023
2006 Jeep Wrangler
Great price, fast shipping and follow u p.
by: Red 10/19/2021
Easy to install. It bolted right up using existing bolts that attach the front bumper.
by: Jon03/16/2015
2002 Jeep Wrangler
Fit great easy install... etrailer.com was beyond excellent
by: Jack 09/27/2022
1995 Jeep YJ
It worked out great! It took about 15 minutes to install Max, and is exactly what I needed
by: Michael 10/31/2021
2005 Jeep TJ
Great fitment. Plain instructions and easy install.
by: Victor 10/21/2022
2002 Jeep Wrangler
As ordered. Perfect fit on my 2002 wran gler.
by: Bob 06/13/2021
Easy to install. Just what I needed to accomplish my job!
by: Brian 10/20/2022
1987 Jeep Wrangler
by: Andrew 10/17/2021
24
24
See what our Experts say about this Draw-Tite Front Receiver Hitch
- Front Mount Trailer Hitch Options for a 2007 Dodge Ram 1500There are a couple of options for a front mount receiver for the 2007 Dodge Ram 1500 depending on the cab size. If the truck does not have a Mega Cab, use CURT Front Mount Receiver, # 31320. I have included a link to the installation instructions for you. Please note, if you have a Sport model, non-Mega Cab, you will also need a spacer kit, # 31320-SK. If the truck does have a Mega Cab you will need CURT Front Mount Receiver, # C31017. I have included a link to the installation instructions...
view full answer... - Recommended Front Mounted Trailer Hitch For A 1999 Ford F-53 There aren't any custom fit front mounted trailer hitches for a 1999 Ford F-53 so you'd need to use a hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On # 41990-07 or part # 41990-16 for 16" tall brackets. You would need to reach out to a local fabrication shop since you'll have to get these welded in place on the frame and will most likely need to make alterations to the front fascia for access to the receiver tube.
view full answer... - Can a Tow Bar be Bolted to a Front Hitch to Flat Tow a 2002 Jeep WranglerTo flat tow your 2002 Jeep Wrangler you would need to have base plates installed. A front hitch is not rated for this application. If your Jeep has a double tube bumper or U-channel bumper and does NOT have front leaf spring suspension you can use Roadmaster base plates # RM-521424-4. If you have a different bumper and/or front suspension let me know. For a compatible tow bar I recommend the Falcon All Terrain # RM-522. This is a non-binding tow bar meaning you won't have to be perfectly...
view full answer... - Mounting Bolt Placement When Installing Draw-Tite Front Mounted Receiver 65048 on 2006 Jeep WranglerThat's a valid question. I just got done conferring with my contact in Tech Services at Draw-Tite, and he confirmed that the second or rearward bumper bolt is indeed omitted. The front mounted receiver's mounting flange provides more than enough reinforcement that the middle bolt isn't necessary. The height difference between the top of the frame member and the top of the bumper beam requires that 3 stacked round washers be used under the hitch mounting flange and one block washer atop...
view full answer... - Installation Position of Front Mount Hitch On a 2006 Jeep Wrangler Unlimited TJThe Draw-Tite Front Mount Trailer Hitch, # 65048, will mount on the top of the bumper on your 2006 Jeep Wrangler Unlimited TJ. I have linked the installation instructions and an installation video for you to review. You will need to remove the plastic shield, OEM tow hooks, and upper bumper bolts, to install this hitch. You may also be interested in the HighRock 4x4 Hitch Mounted Tow Strap Loop, # B4292201.
view full answer... - Which Front Hitch Fits 1998 Jeep Wrangler for Use with Snow PlowSince your goal is to push a plow with a front hitch for our 1998 Jeep Wrangler you'd want the hitch part # C31028 instead as the Draw Tite # 65048 puts the hitch opening too high for a plow like the SnowBear part # SB324-080 to be used. In the install instructions there's no mention of needing to remove tow hooks so you wouldn't need to remove them.
view full answer... - Will Draw-Tite Front Mount Hitch For 2006 Jeep Wrangler Support Snow PlowYes, so long as your snow plow and mount weigh a combined 300 lbs or less, the Draw-Tite front hitch that fits your 2006 Jeep Wrangler will indeed be able to support it. The correct part number for the hitch that fits your Jeep is the following: - Draw-Tite Front Mount Trailer Hitch Receiver # 65048
view full answer... - How Does the Draw-Tite Front Hitch # 65048 Install on a 1997 Jeep Wrangler TJTo install the Front Hitch part # 65048 on your 1997 Jeep Wrangler TJ you will use one of the holes on the bumper and then also use one of the sway bar bushing bolt holes. Check out the picture I attached for more info. I also attached a link to the installation instructions for you to check out as well.
view full answer...
- Front Mounted Receiver Hitch That Mounts Under Bumper for 2000 Jeep Wrangler TJWe've got what you're looking for. The Curt Front Mount Hitch Receiver, part # C31028 mounts to the undersides of the frame members at the front of your Jeep so that the receiver opening is located under the front bumper, as you can see in the photo I've provided. If you need the front receiver to provide an attachment point for something fairly heavy like a snow plow, I'd also recommend the Timbren # TJFTJ springs which fit 4x4 models only. The Timbrens prevent the front end from sagging...
view full answer...
- Weight Ratings of Draw-Tite Front Mount Receiver Part # 65048The Draw-Tite Front Mounted Receiver, part # 65048 has a GTW (gross trailer weight) rating of 3000 lbs, a straight line pull of 9,000 lbs and a vertical load capacity (maximum amount of weight that can be suspended from receiver) of 300 lbs. To view the installation instructions or an installation video, click the provided link.
view full answer... - Dimensions of the Draw-Tite Front Hitch 65048 for a Jeep CJ-5 I went out to our warehouse for you and measured the Draw-Tite Front Mount Trailer Hitch Receiver part # 65048. The actual cross tube is 28-1/4" long. The bolt holes are 31" apart on center and the outside to outside flange measurement is 33" long. I have attached a photo to assist. Unfortunately, I don't have any advice for using the above with a brush guard as we do not recommend doing so because as you mentioned, they mount in the same location. However, if you want to use longer bolts...
view full answer...
- Recommended Front Mount Hitch for a 2005 Jeep Wrangler That Mounts Under BumperI do have a front mount trailer hitch for your 2005 Jeep Wrangler that can be mounted under the front bumper, the Curt Front Mount Trailer Hitch Receiver part # C31028 (see photo) which is the only option that can be mounted in this way but the Draw-Tite Front Mount Trailer Hitch Receiver part # 65048 installs above the front bumper.
view full answer...
- Snow Plow Compatibility with 1991 Jeep YJ WranglerBoth the Curt # 31408 and Draw-Tite # 65048 mount to the top of the bumper as you referenced. I believe you are correct that the hitch mounted snow plow won't work with these, because both SnowBear and Detail K2 snow plows we carry all use custom brackets versus a front hitch for your vehicle. I've linked the page to the snow plows compatible with your vehicle and all the SnowBear plows use the Custom Mounting Bracket Kit for SnowBear Hydraulic and Winter Wolf Snowplows # SB397-024.
view full answer... - Is Draw-Tite 65048 Front Mount Hitch A Fit For 1991 Jeep WranglerThe Draw-Tite Front Mount trailer hitch part # 65048 is a designed to fit the 1991 Jeep Wrangler. The installation does not require drilling but does require some minor fascia trimming to the front of the Jeep. The only reason the hitch would not fit the Jeep is if the Jeep has a tube style bumper. I have attached an example of what a tube style bumper looks like. There are currently not any front mount hitches available for Jeeps with tube style bumpers because there is not a proper place...
view full answer...
- Compatibility of Front Hitch on a 2004 Jeep Wrangler with Mountain PackageI looked up the Mountain addition for your vehicle and it didn't mention if it had an aftermarket bumper but it did state fog lights which may be an issue for mounting the Draw-Tite # 65048 hitch. Because these hitches are tested with the vehicle's base model and not all the trim packages, I would take a look at the instructions for the # 65048 and the Curt # C31028. These two carry the same capacity but mount in two different ways, you may have luck in one or the other. If you do indeed...
view full answer... - Recommended Front Hitch for a 1995 Jeep YJI have a solution for your Jeep YJ but it isn't the Curt front hitch # C31028 you were looking at. I don't show that as being a fit for your model. I would instead recommend the Draw-Tite # 65048 front mount hitch for your 1995 Jeep YJ. The Draw-Tite hitch will have a 2 inch receiver and 300lbs of vert pull and 9,000lbs of line pull. This will install on top of your bumper, I've linked the instructions to this page for your convenience. There is a Curt branded front hitch # 31408 for...
view full answer... - Picture Request of a Front Mount Hitch Installed on a 1997 Jeep WranglerI attached a picture of the Curt Front Hitch part # C31028 installed on a similar Jeep Wrangler as your 1997 model. I also attached a set of installation instructions for you to check out that are very detailed. The hitch mounts through holes on the frame. Some of them are already there and some have to be drilled. I also attached a picture of the Draw Tite Hitch part # 65048 installed as well as installation instructions.
view full answer...
Do you have a question about this Front Receiver Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Jenny M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
9/9/2023
A lot of the time the hardware is tucked into the receiver opening. In the case that it is not I will have our Customer Service team to reach out to you.