Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Sturdy steel ball mount with solid shank measures 6-5/8" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.
Features:
Specs:
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (2133 Customer Reviews)
Sturdy steel ball mount with solid shank measures 6-5/8" from center of hitch pin hole to center of ball hole. Drawbar is Class I and Class II compatible. Powder coat finish over a-coat base provides excellent rust protection.Exactly what I was looking for, received and installed and is perfect. Thanks
The hitch was well made and relatively easy to install. I installed it on a 2016 Golf Sportwagen LE. I can confirm that as others have stated that I did NOT need to trim the bumper fascia (as the instructions said I would need to). I separated the black, lower part of the fascia from the top part before reinstalling the main fascia. I was then able to snap the lower part on after fitting it around the hitch chain loops.
A couple of other notes: the LE has the rear cross traffic alert. The sensors are bolted on each side of the bumper. I thought with the additional thickness of the sensors that the bolts might not be long enough but they fit fine.
As has been mentioned in other reviews, the torx screws in the wheel wells have very little clearance. I highly recommend getting a torx racquet set. I bought one at a hardware store for about $20 (Kobalt 24-Piece Standard (SAE) and Metric Mechanic's Tool Set with Hard Case). This makes the removal of those screws straight-forward.
Product was as described, but, more importantly, there was a very small issue and it was promptly handled very professionally.
etrailer is very refreshing in an old style sort of way and only old guys can truly appreciate them. They do business as if I was the only customer they have! Very prompt, professional, and first class in all things!
Joints are soldiered and have to wonder when under load, that is within specs if the pressure of pulling a small trailer( 3x5) loaded with about 500 lbs. over todays poorly maintained roads will hold up under the stress? There is a bit of a wobble when that mount is inserted into the sleeve of the hitch and I am a bit concerned that the loose fitting may also impacted on this mount to function properly!
Service was outstanding, everything fit exact, and delivery on time. Most outstanding were the videos on how to install, spot on. Hitch took thirty minutes, wire harness forty-five This was on a Prius V. This will be used to pull a small boat , boat and trailer 600lb. Thanks for your outstanding help.
The trailer hitch for my 2001 CRV was a perfect fit.
In my case, the product arrived the next day.
In my dealings with etrailer, I found them to be courteous, knowledgeable and very helpful.
Heavy duty should work great towing my small utility trailer. Installs on my receiver hitch in seconds.
The Draw bar and Ball arrived today with no problems. The sales rep, John, was very helpful when I called to order these products. I am very happy with the hitch that I ordered previously and the Draw Bar and Ball that I ordered this time. Thanks
Everything was as described and the team at etrailer did a fantastic job of keeping me up to date on my order. I recieved updates while the product was in route and a follow up email to confirm everything was OK. Job well done!
Well-built, but it's not obvious which end is up! My mechanic installed the hitch ball on the wrong side.
I am Extremily Happy with the Trailor Sport Hitch Package that I recived in 5 days in very good condition from ETRAILER CORPORATION, Thank You. I will be back
Quality product; very sturdy. Included pin has a groove on one end rather than a hole to hold the cotter pin. Seems secure but I haven't really tested it on a long trip.
The product was as described and shipped quickly. It is of high quality and strength and fits perfectly for our utility trailer.
Product was as indicated. Fit was good. Everything went well with installation.
Looks like it will work. Seems solid and well built. Ball was installed easily enough and the holes seems to line correctly.
Great drawbar and extra heavy duty bar.should work fine
Excellent transaction, fast shipping, product works with the hitch , very satisfied customer :)
works with my Passat
Stevein228
1/5/2015
Great! Ive used it a bunch of times and it is always a perfect solution. I would purchase it again in a minute.
It's a heavy welder metal bar with holes in the right places. :) Had a paint ding on mine, but I can't imagine that could stop this from working fine for decades.
worked great, no problems
Good solid product. Performs as expected. I would recommend to others.
Was a match for the hitch I purchased and worked great
VERY PLEASED WITH THE ITEM I PURCHASED. EXACTLY AS IT WAS INTENDED AND EVERYTHING FITS GREAT,
THOMAS F.
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Matthew
9/17/2020
Glad I bought with hitch. Works well and perfect for my needs.