Availability of Flat Ball Mount for Use in a 2-inch x 5/8-inch Shadow-Mount Hitch

Question

Question:

Hi, Im looking for a Hidden Hitch Class 1 Flat-Bar Ball Mount. Would you have that in stock by any chance? Thank you!

asked by: Alexandre M

0

Expert Reply:

Thank you for providing a photo of your 2-inch x 5/8-inch shadow-mount hitch. This type of hitch is now obsolete and we offer no ball mounts for it.

expert reply by: Adam R

0

click to enlarge

Answer 1

We have all the best parts to add a hitch, cargo carrier and cargo bag to your 2018 Infiniti QX60, and let's start with the hitch. The best hitch for your 2018 Infiniti QX60 is the Draw-Tite Trailer Hitch Receiver #76031 because it is has…

view full answer...

Answer 2

The only way to convert your hitch to a standard receiver would be to have one welded on. But the much safer option is to install a different hitch. I recommend Draw-Tite hitch #36296 for the 2000 Dodge Grand Caravan because with it the receiver…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Availability of Flat Ball Mount for Use in a 2-inch x 5/8-inch Shadow-Mount Hitch

Product Page this Question was Asked From

Continue Researching