Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
2" x 2" Receiver tube is designed for fabricating a custom hitch when a receiver isn't available. Weld-on installation. Tube is 12" long. Raw steel construction is durable.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Gen Y weld on receiver tube. Now this receiver tube allows you to fabricate your own receiver hitch. The opening, right here, is designed for two inch hitch accessories, so that opening measures two inches by two inches. And that features a reinforced 3/4 inch steel collar for added strength and durability.A few measurements I just want to take for you here. I want to go outer edge to outer edge, that's a square design, so whatever we get side to side will be the same up and down. So, edge to edge, this direction, you can see there's about three inches.
And then inside edge to inside edge is about two inches. Now, we're looking at a raw steel construction, so it's ready for welding.Product is made in the USA, and it has a capacity of 16,000 pounds. So that's the rated capacity for this unit. Now, please keep in mind that your capacity depends a lot on how it's installed, and what it's installed on, or what it's attached to. But this unit, itself, does feature a 16,000 pound rated capacity.
Then, when it comes to the overall length, measuring edge to edge, you can see here, that that measures about 12 inches long.The pin hole right here, will accept a standard 5/8 inch diameter hitch pin or hitch lock. That item is not included. Again, overall length about 12 inches. Now, I took a measurement from the center of the hitch pin hole to the front of the unit, and that was 2-1/2 inches. From the center of the hitch pin hole to the very back of the unit, was 9-1/2 inches.
That's going to do it for today's look at the Gen Y weld on receiver tube.
Average Customer Rating: 4.9 out of 5 stars (47 Customer Reviews)
2" x 2" Receiver tube is designed for fabricating a custom hitch when a receiver isn't available. Weld-on installation. Tube is 12" long. Raw steel construction is durable.quality construction. Wil work well for a trailer winch mount.
End of tube that shows was heavily ground down and not square, but still usable after I ran it through my own belt sander
Item was received as described on website. This is exactly what I needed to weld onto my trailer so I can use my winch on my trailer. Excellent communication and customer service!
Looks like very good quality
As described, shipped really fast, Nice looking welds, excellent material, really good price.
You did exactly what I needed for my project
Well made product. As a metalworker, I especially appreciate the fact the tube seam is not haphazard. Thoughtfully placed top or bottom. Holes for the pin are de-burred. The front is a wee sharp, but crisp. I filled in the extra bit of seam leftover so I have a nice clean part for my job.
Should work just fine for my custom bum per.
Troy
2/18/2023
Great, I used it to fabricate a snow plow on my 85 Jeeo CJ
Ordered a few weld on trailer hitch receiver tubes among other trailer parts. Parts were delivered in a timely manner and the quality of the receiver tubes is excellent. I will buy from this group in the future when I need trailer parts.
Part as described
Very heavy strong parts. A few sharp burs on inside of receiver tube opening needed to be removed. Ball holder and ball both arrived in good shape. Shipping was very fast and free. etrailer came through again with good parts and service.
Well made 2” receiver.
Well built, extra length for fabricating.
Arrived in a timely fashion.
E trailer delivers quickly.
I quickly received my competitively priced order! Thank you.
Michael
8/29/2023
Great! Holding up well
Works as advertised. Made for the job at hand. Timely delivery..knowledgable staff. Thanks
Very well made.
Excellent service quick shipping very p rofessional!!
Thanks
excellent product, very fast delivery
received the part quickly. just what what I was looking for. Thanks
Bill l
Appears to be perfect part to replace part that broke on my 1991 Bluebird Wanderlodge.
Great product and excellent service.
It seems to be well made.
WE ARE HAPPY WITH THE PART
Do you have a question about this Hitch Fabrication Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sfab
1/10/2022
still stellar.