Buyers Products Weld-On Receiver Tube with 2" Hitch Receiver - 8" Long - 20K
(20 reviews)
Price: $38.36
In Stock
Buyers Products Weld-On Receiver Tube with 2" Hitch Receiver - 8" Long - 20K
Item # 337RT25808B
Retail:$50.11
Our Price: $38.36
You Save: 23%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (20)
- Q & A (0)
- Videos (1)
- Photos
Buyers Products Hitch Fabrication Parts - 337RT25808B
- Receiver Tube
- Fits 2 Inch Hitch
- 8 Inch Long
- Painted
- Buyers Products
Powder coated, carbon steel tube welds to your cab and chassis truck to give you a 2" receiver for towing. Can be cut and customized to act as the center section of your fabricated hitch.
Features:
- Receiver tube welds onto your heavy-duty cab and chassis truck to add towing capabilities
- Tube can be trimmed to fit your application
- Heavy-duty carbon steel construction
- Black powder coat finish resists corrosion
- Made in the USA
Specs:
- Receiver opening: 2" x 2"
- Overall length: 8"
- Length from center of pin hole to collared end: 2-1/2"
- Length from center of pin hole to non-collared end: 5-3/4"
- Tube thickness: 1/4"
- Collar thickness: 1/2"
- Gross towing weight: 20,000 lbs
- Hitch pin hole diameter: 5/8"
RT25808B Buyers Products Black Combo Bar - 2 Inch Opening x 8 Inch Long
Video of Buyers Products Weld-On Receiver Tube with 2" Hitch Receiver - 8" Long - 20K
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Buyers Products Hitch Fabrication Parts - Receiver Tube - 337RT25808B Review
Speaker 1: Today we're going to take a look at the eight inch long, two inch by two inch black receiver tube. Now these well done receiver tubes are available in a variety of lengths, dimensions and finishes to match your towing needs. This part is the eight inch long version. This is a two inch by two inch receiver tube. Features a nice cast steel collar and a solid stress collar opening.This is eight inches long, it's a black finished tube contains a 5/8 inch diameter hitch pinhole and it can achieve a rating up to 20,000 pounds. This tube is a carbon steel construction, black powder coat finish.
And I just want to give you a measurement on this, the eight inches end to end is right at eight inches. And again, the maximum gross trailer weight capacity is 20,000 pounds.But that should do for the review on the eight inch long, two inch by two inch black receiver tube.
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Buyers Products Weld-On Receiver Tube with 2" Hitch Receiver - 8" Long - 20K - 337RT25808B
Average Customer Rating: 4.9 out of 5 stars (20 Customer Reviews)
Powder coated, carbon steel tube welds to your cab and chassis truck to give you a 2" receiver for towing. Can be cut and customized to act as the center section of your fabricated hitch.by: Jon07/28/2023
Built a custom front hitch for my Jeep Wrangler. It has an "all terrain" tow setup installed for towing behind our motorhome, so a bolt-on hitch receiver would not work. The bare receiver tube was just what I needed, and welded with a stout angle iron it'll be perfect for the snowplow I'll be using this winter.
by: Lee 01/02/2024
Ever thing arrived in good shape and was just what I wanted
by: Gary V06/06/2020
I purchased this product so I could attach a 2 5/16 coupler on a 2 inch bar into it. Then this connects to the 2 inch Hensley Hitch bar. With this, I am able to move my trailer around my yard very easily and make very tight turns using a stand 2 5/16 ball on my car or tractor. I know this sounds complicated but for those who own a Hensley Hitch, it is fantastic. Your 2 inch receiver “worked like a champ”.
by: Gary 08/15/2023
Exactly what I needed. Well made in the USA
by: Craig 01/05/2023
Good products, Great prompt service!
by: Scotty02/06/2019
Fabrication parts for me!!! I'm very happy that you offer these parts for the home fabricator! Great Quality...Fast Shipping!
by: Mike09/09/2019
Well built weld on unit.
My experience with Buyers products has always been great, this coming from a retired truck builder.
by: Vern w10/20/2019
Couldn't get a bolt on hitch for my vehicle so I bought this and my nephew welded it on. Works great.
by: Tim I08/16/2019
Exactly as advertised. Took good care of me. Even upgraded my shipping at no extra cost.
by: Kevin 04/21/2024
by: Charles10/04/2020
Great
by: Dale 10/14/2021
correct part and on time!!!!
by: Timothy 08/11/2022
by: Michael 10/11/2022
by: William 11/04/2021
Quality!
by: Darren12/29/2021
by: Ed09/23/2021
by: Ed07/08/2021
by: Glenn 07/25/2022
by: Ben 05/29/2021
20
20
See what our Experts say about this Buyers Products Hitch Fabrication Parts
- Recommended Spare Tire Carrier For Little Giant Let's Go Aero TrailerWith where you are wanting to mount your spare tire and not having it attach to the front panel, the Trailer Hitch Universal Spare Tire Carrier # 6715 is the only thing I can see working. You will need to attach a Receiver Tube # 337RT25808B to attach to the crossmember below the trailer to hold the carrier. This would be best welded onto the crossmember so that it is secured to the trailer. The Anti-Rattle Trailer Hitch Receiver Lock # 63232 will remove the play in the receiver and secure...
view full answer... - Spare Tire Mount And Hitch Mounted Cargo Carrier Options For A 1979 Airstream Motorhome Hi Eric, Airstreams typically have small tongues but if you have the space you could install the Demco Spare Tire Mount # DM15851-76. This clamps on to the trailer frame at the tongue giving you space for the hitch mounted carrier in the back. If not, you could also just get a weld-on receiver tube # 337RT25808B and weld it to the top of the bumper off to the side so that it doesn't interfere with the other carrier. If these won't work then send me some pictures of your motorhome and...
view full answer... - Is the Buyers Products Black Receiver Tube Made in the USAThe Buyers Products Black Receiver Tube part # 337RT25808B isn't made in the USA but the Gen-Y Weld-On 2" Receiver Tube part # 325-GH-003 is and you can cut it down to the exact length you need and paint it.
view full answer... - Does Curt Front Mount Hitch 31042 Fit A 1997 Chevrolet Tahoe 4x4?You are correct that the Curt Front Mount Trailer Hitch Receiver # 31042 you were looking at is confirmed to fit your 1997 Chevrolet Tahoe 4x4 and does have the receiver welded to the bottom of the crosstube. You could in theory weld two more receivers to the crosstube using the Buyers Products Black Receiver Tube 2" I.D. # 337RT25808B, but that would void the warranty of the hitch. You would also need to be careful to not overload the 500lb vertical load limit of the hitch it self. I...
view full answer...
Do you have a question about this Hitch Fabrication Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Updated by:
Wilson B
Updated by:
Justice A
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Gary V.
6/7/2021
Still works great