Dimensions of the Gen-Y Weld-On 2 Inch Receiver Tube

Question:

If you do actually provide receiver tubes with 7/16" wall thicknesses, you should be bragging about having the strongest and heaviest receiver tubes anywhere!

asked by: David S

Helpful Expert Reply:

The Gen-Y Weld-On 2" Receiver Tube - 12" Long - Steel # 325-GH-003 has a tube thickness of 7/16 inch. The collar thickness is 1/2 inch and the collar length is 3/4 inch not including the weld bead on the back.

expert reply by: Jason S

click to enlarge

David

5/1/2020

If you do actually provide receiver tubes with 7/16" wall thicknesses, you should be bragging about having the strongest and heaviest receiver tubes anywhere!

Jason S.

5/1/2020

My apologies. I wanted to make sure you got the correct measurements so I had the part pulled from the warehouse and have attached the caliper measurements. There are some factory tolerances so each may be slightly different, but the thickness you are seeking is indeed closer to 9/32 inch which is quite a bit smaller than the 7/16 inch I previously answered. I've also given you the measurements of the other components to assist. I hope this is helpful.