THIS ITEM IS NOT A FIT FOR
2001 Toyota Sienna
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # 24795
Retail:$323.24
Our Price: $208.03
You Save: $115.21
2001 Toyota Sienna
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (113)
- Q & A (0)
- Photos
Draw-Tite Trailer Hitch - 24795
- Class I
- 1-1/4 Inch Hitch
- 2000 lbs GTW
- Concealed Cross Tube
- Draw-Tite
- 200 lbs TW
- Custom Fit Hitch
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Computer-aided, fully welded steel construction ensures strength and durability
- Tested Tough - safety and reliability criteria exceed industry standards
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Drawbar and pin and clip sold separately
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
24795 Draw-Tite Class 1 Trailer Hitch Receiver - Sportframe
60872 Hidden Hitch Class 1 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2007 - 2011 Hyundai Accent 3-Door Hatchback
- 2007 - 2010 Hyundai Elantra Sedan
- 2006 - 2011 Kia Rio 5
California residents: click here
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Defective
- Arrived Damaged
Customer Reviews
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - 24795
Average Customer Rating: 4.7 out of 5 stars (113 Customer Reviews)
This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.by: Lorance03/08/2024
I installed myself. Good product. Has worked fine for me in the last year. I recommend.
by: Connor 08/30/2023
Great product! Easy to install and fits perfectly to my vehicle. Works great with my bike rack.
by: Michael03/14/2020
I installed this hitch on an 08 Hyundai Accent in 40 minutes with only moderate
mechanical skills. It fit perfectly using the included spacers and had no problem
threading the bolts in. I did the job aone but a helper would be great. The hitch is
nearly invisible and will be used to carry a bike rack. So far I am very happy with the set up.
by: John B10/06/2019
Second hitch purchased from etrailer, quality same as the first ,excellent. Installation proceeded without any big issues. A floor jack helped make a one man installation simple. Wireing revealed a faulty brake light switch.
by: Devere03/19/2023
I looked at this hitch on several websites, including Draw-Tite and etrailer. I looked at the install videos, however, it does not fit without modifying the trunk pan and cutting off the tow loop on the bottom of it as well. The holes on the mounting plates match and the bolts are the correct size, but the corners of the trunk pan do not allow the bar to be lifted into place. I will either have to cut out the corners of the pan or deform them enough so the receiver bar can be lifted into place. After several hours of struggle, I have yet to figure how to properly install this piece on my daughters 2008 Hyundai Elantra, which, according to you and Draw-Tite, neglect to mention. The product looks fine but there is simply not enough bend to clear the trunk pan.
by: Tom09/08/2018
2019 Hyundai Accent
The Draw-Tight hitch from etrailer was excellent quality. It was sized for several models of cars, with included both 12 mm and 10 mm frame bolts, plus spacers for slightly narrower frames like on my Hyundai Accent. I installed it unassisted in 70 minutes on the second try after the threads in the car's frame were clear. The only tool needed (when using 12 mm bolts) would be a 19 mm box or combination wrench. A flat-blade screwdriver to pry the rubber hanger off the muffler pins, and large channel lock pliers to squeeze it back on afterwards are both very helpful.
My car's frame width needed the spacers. Most of the time was spent trying to line up the bolts, spacers, and hitch with the holes in the car's frame. You can only get one hand in up over the muffler. I worked the bolt heads with thumb and fore-finger, the spacers with pinkie and ring finger, and manipulated the middle of the hitch with the other hand. If I had to do it again, I would epoxy the spacers to the hitch before starting.
Clearing the threads in the car frame was another story. Step one of the instructions was to remove the plastic plugs protecting the threads in the frame. There were no plugs in my 8-year old used car. On my first try at installation, using the 10 mm bolts to clear the crud out of the 12 mm holes, I was able to pre-thread the two bolts into the driver's side holes. But the crud was baked in on the passenger's side holes up over the muffler. I had to order a 12 x 1.5 mm tap, dribble it with PB Blaster, and thread it in with an 8 mm open-end wrench before the bolts would go in. This was not the fault of the hitch kit.
Working alone with all the threads clear, I installed the front bolt loosely on the driver's side to help hold the hitch. I positioned the hitch up behind the bumper cover, and then installed the right rear and then right front spacers and bolts loosely. I removed the left front bolt, and installed the left rear and left front spacers and bolts. When all the parts were in place, I tightened everything and then re-attached the muffler hanger. Again, this took 70 minutes, but I had seen how it needed to go together on the first attempt.
by: Midwest Fred08/13/2013
Hyundai
Excellent product at a great price! The hitch fit my car perfectly and was relatively easy to install. I would recommend that this be a two man job; I really could have used an extra pair of hands to help me hold it while I bolted it in place. Otherwise perfect! I have towed a very heavy trailer with my Hyundai hatchback and it went off without a hitch (ha ha!)
Midwest F.
8/14/2014
Thanks for the follow up. Still love the hitch! I use it all the time.
by: Chris09/18/2022
The first two units I ordered had grossly-misaligned welds, making them fully unusable. Idk who Draw Tite has doing their welding but they'd be much more successful as a surrealist painter or as one of those mathematicians who argues that a coffee mug is essentially a donut.
Fortunately Nathan R at etrailer was super helpful and responsive in finding me a unit that was put together decently, and once that was installed the product has performed as expected.
by: Lito10/08/2017
2010 Hyundai Elantra
Mach perfect the hard time is clean the treat holes on the frame. Whach the pictures
by: Dustin B.05/05/2016
2009 Hyundai Accent
This hitch mount works perfect and holds up to its value. Ideally, this item was purchased for a 2009 Hyundai Accent and works wonders with my car. I use it along with a Thule bike carrier to hold my Fat bikes and Mtn Bikes and never had a problem. Great purchase!
by: Rodger 05/25/2021
I have The #24975 Trailer Hitch on our car so that I may at any moments notice use it for a Bicycle Rack or our Starlite "Pop Up" RV Trailer. Nay an issue with it.
It was an 1-2-3 moment to install it vs taking a Mechanical Engineering Course.
by: Richard M12/05/2016
Order came in a week & was packed good. Online video & instructions made it easy to follow instillation. Hitch was installed in about 40 mins with no problems. Purchased the wiring harness (118433) also & install went well too. Love the way harness plugs in & you can route the wires out of sight! Simple/clean looking set up, would recommend to anybody this etrailer hitch for this car! Thanks etrailer
by: Joshua Hosier04/21/2011
2009 Hyundai Accent
Product was easy to install on my 09 accent. It is indeed hidden pretty well.
as for hooking up the wiring with the optional wiring kit. I had to extend the wires and mount the box to the hitch under my car; with the wires coming up behind my bumper and tail light. Since i have the hatchback version i couldn't get to the wires from inside the car. everything is nice and tucked away and i am happy
by: Albert05/29/2016
2007 Hyundai Elantra
Fabulous hitch and receiver. Easy to put on, even for a novice. We tend to stick to small to medium sized vehicles and will continue to order new hitches and receivers from etrailer as we change out our vehicles over time. Service is fantastic and they are very very helpful. The video was a life saver. Thank you for your great service and great products.
by: Jason T04/19/2014
My order arrived it just a few day and the hitch packaging was undamaged. A 2nd set of hands would have made it much quicker but I was able to install by myself. So far, I'm very happy with the hitch. The wiring kit was not too difficult to install but wished I would have purchased the kit with the T-connectors.
Jason
by: LMM04/06/2017
2011 Hyundai Accent
The hitch it self was excellent and the service was real good. The wiring kit came with no directions. The stuff online for it was not that good. It all did work out well but it took time and the weather was not nice. It should have said universal wiring and I would not cared. Next time I'll be more careful. This is a good company to deal with. This is the first complaint I've ever had.
by: John Groom11/24/2011
Instructions were very clear, except perhaps for the center support on the rear bumper trim - instructions said to trim the tab, but I found that the braket support had to be pushed to the side and up so the hitch could slide up. Otherwise things went as planned and installation was a snap. Also, the hitch fit perfectly. I had to put a bottle jack in the area of the hitch to align the hitch horizontally while I tightened the bolts.
Yes, I would order it again.
by: AJH06/13/2011
Fit up perfectly....after moving/twisting the three plastic fascia support brackets so as to be able to snake the hitch crossmember in front of the car's tow loop (they rotate right back into place after the hitch is bolted down to the frame). Install was done alone, while lying down.... not using a lift. Still only took an hour.
by: Justin S.08/19/2011
Hyundai Elantra
This hitch installed easily on my '09 Elantra. I ordered it along with a 4" rise hitch and the wiring harness (which was also a breeze to install). The most difficult step was getting the hitch to line up for the bolts, but seeing as I installed it by myself with nobody to help hold one side in place, that's to be expected.
Hitch & harness total install time was about 1 hour. Everything is working great.
Hitch & harness total install time was about 1 hour. Everything is working great." />
by: Dan H08/11/2012
2008 Hyundai Elantra
Super easy to install. Product came in 3 days from the time I ordered. I saved over $130 doing this project myself + was able to have it done before I could have even gotten an appointment at the shop. It took me about 40 minutes to install the hitch. Had hard time cleaning dirt out of the bolt holes otherwise I would have had it done in less than a half hour. The electrical was also easy. Took about 10 minutes.
by: Mark. M.03/15/2012
I had no idea installation a hitch could be so easy. The instructions provide were very clear and easy to follow. It took at about 15mins to install.
While it can be done by yourself it does help to have an extra set of hands to hold the hitch in place while you install the bolts.
Once installed it is hard to tell the hitch is there.
by: Pat C05/15/2012
2007 Hyundai Elantra
Fit like a charm looks great videos on installatio were a big help fast shipping only one thing i would add to the installation video is that you have to push the tab connector in the center so the hitch willl go up easier thats the one that you have to trim off from the bumper cover it is in the way when you lift up the hitch other than that would have no problem buying from you again and have told many people about your site thank you
by: Burton09/05/2019
2010 Hyundai Elantra
Bought this for a 2010 Hyundai Elantra to haul a bike rack that fit up to 4 bikes.
I installed this by myself and it worked as expected; no complaints!
by: Tom S.05/28/2013
Received the trailer hitch in excellent condition. Packing the hitch in the cardboard box was excellent. Installation of the hitch took about 1 hr. with the enclosed directions. Wiring is to follow soon.
25
114
Show More Reviews
See what our Experts say about this Draw-Tite Trailer Hitch
- Hitch Pin Hole to Bumper Edge Distance of Draw-Tite 24795 Hitch Installed on 2010 Hyundai ElantraWhen we installed the Draw-Tite Class I hitch, part # 24795 on a 2010 Hyundai Elantra, we found that the hitch pin hole in the receiver was recessed by 6 inches, as shown in the provided photo. This means that the hitch mounted accessory like a bike rack you choose such as the Hollywood Racks Trail Rider, part # HR200Z would need to have a shank that has a hitch pin hole to closest portion of the rack distance longer than 6 inches. Since the closest upright portion of the # HR200Z is 12-1/8...
view full answer...
- Recommended Trailer Hitch for a 2011 Hyundai AccentWe actually have a ton of feedback on the Draw Tite Hitch part # 24795 being installed and used on a 2011 Hyundai Accent. This hitch has nearly a perfect rating from our customers who have it. If you go to the product page for the hitch and then click the reviews tab that is right above the product description you will see all of the feedback we have for this hitch. You may also be interested in purchasing the following products: Hitch Ball with 1-7/8 inch Diameter and Short Shank, part...
view full answer... - Preparing Weld Nuts for Trailer Hitch Installation on a 2007 Hyundai ElantraInstead of starting with a tap, I recommend instead a good thorough cleaning using a penetrate like WD-40 and a wire brush like # DW00254. You can spray down the holes, let it set for about 10 minutes, and then run the wire brush vigorously in the holes. You may have to do this several times to thoroughly clean the holes. It just takes a little time and some elbow grease, but cleaning the holes will not run the risk of damaging the threads like a tap would. The installation of the Draw-Tite...
view full answer... - Will Yakima HangOut 3 Bike Rack Fit 2012 Hyundai Accent Hatchback With SpoilerThe Yakima HangOut 3 Bike Rack, part # Y02638, is listed as a fit for the 2012 Hyundai Accent Hatchback, but Yakima does not test the bike rack to fit a vehicle with a spoiler. The top hooks on the bike rack need to hook on to the top of the vehicle's hatch lid. The straps on the bike rack should not be against the spoiler, otherwise, the spoiler could be damaged when the straps are tightened down. If the spoiler has openings that the straps can go through and allow the bike rack to be...
view full answer... - Does the Bumper Have to be Removed or Replaced to Install a Trailer Hitch on a 2010 Hyundai ElantraTo install the Draw-Tite Trailer Hitch, # 24795, on your 2010 Hyundai Elantra, you will not have to remove or replace the bumper. There is some minor fascia trimming required. A tab on the bottom center of the fascia will need to be trimmed in order for the hitch to fit properly. I have included a link to the installation instructions that include an illustration of where this trimming will occur. I have also included an installation video on a similar vehicle. If you plan on towing with...
view full answer... - Hitch and Cargo Carrier Recommendation for 2007 Hyundai ElantraTrunk bike racks cannot be used to carry a wheel chair as they are only designed for bikes. Only option we have would be a hitch cargo carrier like the # C18145 which would fit your 2007 Hyundai Elantra after you install a hitch like the part # 24795 which is a confirmed fit. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name their favorite, most easy-to-use bike racks and this...
view full answer... - Can a 2009 Hyundai Elantra Sedan Carry a 2 Bike Hitch Mounted Bike RackYes, your 2009 Hyundai Elantra will be able to support a 2-bike hitch mounted rack. But, you will be limited to a bike rack that is compatible with a 1-1/4 Class I hitch since all of the hitches available for your vehicle are Class I 1-1/4. If you do not already have a hitch for your vehicle, I would recommend the Draw-Tite Trailer Hitch, part # 24795. The item you selected Swagman Trailhead 2 Bike Carrier, part # S63360 would be a good option for a bike rack as it is compatible with...
view full answer... - How to Transport Hobi TI Kayak with 2008 Hyundai AccentThat's a lot of weight to put on the roof of a vehicle. Your best option will be to tow a small trailer like the CE Smith Boat Trailer part # CE48810 since the weight of your kayak is more than what your roof and kayak carriers are designed to accomodate. For a hitch you'd need the part # C11094 with ball mount # 3594 for if you have a hatchback or part # 24760 with ball mount # 3590 for if you have a sedan. For a hitch ball you'd then want the # 19258 which matches the coupler size of...
view full answer... - Will Muffler Need To Be Lowered to Install Draw Tite Hitch On 2011 Hyundai Accent 3 DoorThe Draw-Tite Trailer Hitch # 24795 is a fit for your Hyundai Accent 3 Door Hatchback. In order to install this trailer hitch on your Accent, you will need to lower the muffler to gain access to the weldnuts to install the hitch. I have attached the installation instructions for this hitch for you. We recommend cleaning the weldnuts before installing the trailer hitch. This will help ease your hitch installation. First you will want to spray the weldnut with a spray lubricant, then clean...
view full answer... - Class I Hitch Reducer for Use with the Draw-Tite Sportframe Trailer Hitch Receiver Yes, the Hitch Adapter part # HTAD is Class I compatible and can be used with the Draw-Tite Sportframe Trailer Hitch Receiver part # 24795 to provide you with a 2" receiver tube opening. However, the tongue weight capacity of hitch will be reduced by 50% with the use of an adapter. I have attached a review video of the adapter for you as well.
view full answer... - Will Tow Loop on 2010 Hyundai Elantra Interfere w/ Trailer Hitch InstallationThe hitch will fit perfectly, no worries. When we installed the Draw-Tite Class I hitch, # 24795 on a 2010 Hyundai Elantra, we found that the receiver tube will sit just aft of the tow loop you mentioned, as you can see in the photo I've provided. If you plan on using the hitch for light duty towing, you'll need a few other items to complete your towing system: Trailer wiring harness, part # 118433 Ball mount, part # 3594 1-7/8 inch trailer ball, part # 19256 or 2 inch ball # 19258 Pin...
view full answer...
- Recommended Trailer Hitch and Wiring for 2010 Hyundai AccentStarting with the trailer hitch for your 2010 Hyundai Accent, I do recommend the Draw-Tite Class I Sport Frame Receiver Hitch # 24795 referenced in your question. This is a Class I hitch that will provide a towing weight capacity of 2,000 pounds. I like this model over the Curt alternative also confirmed to fit your vehicle because unlike Curt, Draw-Tite does not require the use of stabilizing straps like # 18050 with non-trailer loads such as bike racks and cargo carriers. After your move...
view full answer... - Trailer Wiring, Drawbar, Ball Mount, and Ball Recommendations for a 3 Door 2011 Hyundai AccentAside from the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 inch, part # 24795, you would need the following items to complete your towing setup: Sportframe Drawbar 4 inch Rise 2000# Kit, part # 3594 Hitch Ball with 1-7/8 inch Diameter and Short Shank, 2000 lbs GTW - Chrome, part # 19256 Draw-Tite Wiring for the Hyundai Accent, 2011, part # 119178KIT I have included installation instructions for the # 24795 as well as an installation instructional video....
view full answer... - Can a 2 Inch Trailer Hitch be Installed on a 2009 Hyundai Elantra SedanThere is only one Class I, 1-1/4 inch trailer hitch available for your 2009 Hyundai Elantra, the Draw-Tite hitch # 24795. If your bike rack only fits a 2 inch hitch then you would have to use an adapter, # HTAD, to be able to use that specific rack. The use of an adapter will reduce the tongue weight capacity of the trailer hitch by 50 percent. All of the hitches for the Elantra have a tongue weight capacity of 200 pounds so when using the adapter the capacity is reduced to 100 pounds....
view full answer... - Trailer Hitch and Related Parts for Towing Small Boat Trailer with 2011 Hyundai AccentThe trailer hitches that fit your 2011 Hyundai Accent 3-door hatchback are the 1-1/4-inch Class I type like # 24795 from Draw-Tite. All hitches for your car include the required hardware, install without drilling and share a 2000-lb maximum towing capacity. According to my research the Accent is not formally rated to tow any trailer weight (see page 2-20 in your manual). However, I did also find owner comments indicating that small trailers have been successfully towed with the car. Its...
view full answer... - Do you Have to Trim Fascia to Install Hitch on a 2007 Hyundai ElantraI checked with the installation instructions for the Draw-Tite Hitch # 24795 and the installation instructions for this hitch requires you to trim the fascia. I attach a video of this being installed on a 2008 Elantra for you.
view full answer... - Will Draw-Tite # 24795 Fit my 2010 Hyundai Elantra with a Recovery Tow LoopThe Draw-Tite hitch #24795 will fit your 2010 Hyundai Elantra as long as it is the Sedan model. We have test fitted the product on a Hyundai Elantra with a tow loop and I attached photos of the hitch on the vehicle. The hitch sits right in front of the tow loop and it does not interfere with the use or installation of the hitch. If your Elantra is a Touring Hatchback, this hitch will not fit and you will need Draw-Tite Hitch Receiver #24844. This hitch has a powder coat finish to ensure...
view full answer...
- Difference Between Hidden Hitch # 60872 and Draw-Tite # 24795 for 2008 Hyundai ElantraWhen it comes to the difference between the Hidden Hitch, # 60872 (no longer available), and the Draw-Tite, # 24795, trailer hitches for a 2008 Hyundai Elantra, part # 60872 includes a ball mount, hitch pin, and clip. If you do not plan to do any towing with your Elantra, these extra components would be unnecessary. Other than that, the hitches are nearly identical since the two manufacturers are sister companies. If you are still in the market for a hitch mounted bike rack, one of my...
view full answer... - Best Wheel and Frame Mount Hitch Bike Rack for 2008 Hyundai Accent HatchbackLets begin with the hitch. I would recommend the Draw-Tite Class I receiver, part # 24795. We have several platform-type bike racks available that are compatible with a Class I hitch (see link). The Swagman XTC-2, part # S64670 is one of our most popular and highest-rated bike racks. The angled shank raises the rack 3 inches above the receiver, providing exceptional ground clearance. The bikes are held by the wheel hoops, as well as ratcheting hooks that will securely hold the bikes in...
view full answer... - Hitch Recommendation for a 2007 Hyundai Elantra SedanI have a hitch that is confirmed to fit your 2007 Hyundai Elantra sedan, but the part # C11493 that you referenced will not fit. Instead, you would want the Draw-Tite part # 24795 as it has been confirmed to fit your vehicle. I attached an install video for this hitch for you to check out as well. This hitch does not come with a ball mount but does have a pin and clip. To complete your towing setup you may also want the part # 118433 for wiring, # 19256 for a 1-7/8 inch hitch ball, and...
view full answer... - Will Draw-Tite Trailer hitch # 24844 Fit the 4 Door Sedan Model of a 2009 Hyundai ElantraWe have several hitches that are specifically designed to fit the 2009 Hyundai Elantra sedan. The trailer hitch that you have referenced, # 24844, is designed to fit the 2009 - 2011 Hyundai Elantra Touring Hatchback, so it will not fit the sedan. The difference is that # 24844 has a longer receiver tube so it is not too far under the vehicle. The Sedan rear end has a different shape so the receiver tube is shorter. The comparable trailer hitch for a sedan model is # 24795. I have included...
view full answer... - Is There a 2 Trailer Hitch for a 2007 Hyundai ElantraThe only trailer hitch options available for a 2007 Hyundai Elantra are class I, 1-1/4" like the Draw-Tite Sportframe Trailer Hitch Receiver part # 24795 which is what I recommend. The reason for this is because the vehicle is small and cannot support the capacities of a class III hitch therefore one is not avavailbe. That said, there are still carrier options for the smaller hitch size like the 19x47 Curt Cargo Carrier part # C18110. There are also adapters like the Trailer Hitch Receiver...
view full answer... - Comparing Draw-Tite Trailer Hitches #24844 and #24795 for a Hyundai ElantraThe Draw-Tite trailer hitch # 24844, is designed for the 2009 to 2012 Hyundai Elantra touring Hatchback. The hitch is designed specifically to attach to the mounting locations on the hatchback which are different than those on the sedan; and it only goes back to 2009. The correct Draw-Tite hitch for a 2008 sedan is # 24795. As you can see in the video I have linked showing a typical installation, the receiver is not too far recessed from the rear of the vehicle. Another issue to look...
view full answer... - Which Vehicles Does Draw-Tite Sportframe Trailer Hitch Receiver 24795 FitThe Draw-Tite Sportframe Trailer Hitch Receiver part # 24795 fits the following vehicles: 2007 - 2011 Hyundai Accent 3 Door Hatchback 2006 - 2011 Kia Rio 5 Hatchback 2007 - 2010 Hyundai Elantra Sedan Please let me know your year make and model if it's not on the list and I can recommend a hitch that fits. I have added an installation video on a 2010 Hyundai Elantra.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Video Edited:
Zack K
Video Edited:
Dustin K
Video by:
Andrew K
Video by:
Joshua S
Written by:
Lindsey S
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Amanda M
Updated by:
Jenny M
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Tom
9/8/2019
UPDATE: I have had no problems with the hitch on my 2010 Accent. I built a 3.3 x 4 trailer kit with a removable car top carrier for extra luggage space, or moving my snowblower on the deck without the carrier. I probably drive more miles with the trailer attached than without it.