Will Draw-Tite # 24795 Fit my 2010 Hyundai Elantra with a Recovery Tow Loop

Question

Question:

I have a 2010 Hyundai Elantra and want to confirm 60872 will fit the vehicle. It has a recovery tow loop that is welded to the bottom on the unibody and I am concerned it will interfere with the hitch installation see attached photos. Thanks.

asked by: Marc T

0

Expert Reply:

The Draw-Tite hitch #24795 will fit your 2010 Hyundai Elantra as long as it is the Sedan model. We have test fitted the product on a Hyundai Elantra with a tow loop and I attached photos of the hitch on the vehicle. The hitch sits right in front of the tow loop and it does not interfere with the use or installation of the hitch. If your Elantra is a Touring Hatchback, this hitch will not fit and you will need Draw-Tite Hitch Receiver #24844.

This hitch has a powder coat finish to ensure superior corrosion resistance. A pin and clip are included with the hitch. It is designed for light-duty applications and lets you tow a trailer or carry a bike rack on the back of your Hyundai Elantra. If you are planning on using the hitch for towing you will need a wiring harness. If you have a sedan model I recommend T-One Vehicle Wiring Harness with a 4-Pole Connector # 118433. If you have a Touring model, I recommend T-One Wiring Harness # 118473. You will also need a hitch ball to tow a trailer. I recommend the 1-7/8 Inch Ball # 19256. I have linked our help article on tips for trailer hitch installation.

I have attached a video installation for the Draw-Tite hitch on a 2010 Hyundai Elantra you may want to check out. The installation for the Hidden Hitch you are looking at is the same for the Draw-Tite hitch I attached the video for. I have also linked our help article on tips for trailer hitch installation you may want to check out.

expert reply by: Sarah H

0

click to enlarge

Answer 1

Thanks for the info on your bikes! I did not find any pictures of a 20" Frog 52 with a fender, but I was able to find a picture of your Giant Quick E+1 and as long as both bikes have fenders that go the same distance forward you shouldn't…

view full answer...

Answer 2

I do have some information for you but unfortunately we haven't had the chance to install the Draw-Tite Sportframe Trailer Hitch Receiver #24844 on a 2009 Hyundai Elantra so we don't have a video for you that shows the where the receiver sits…

view full answer...

Answer 3

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 4

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Will Draw-Tite # 24795 Fit my 2010 Hyundai Elantra with a Recovery Tow Loop

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching