T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

• 4-Way Flat Plug and Play Wiring Harness For a 2007 Dodge Dakota
  You will need a T-One Vehicle Wiring Harness # 118323 for your 2007 Dodge Dakota without the factory tow package. There is not an adapter which will allow you to go from the Tacoma connector to the Dakota so you will just need a new harness.
  view full answer...
• Parts Needed to Add a 4-Way Trailer Wiring Harness to a 2004 Dodge Dakota
  The 2004 Dodge Dakota came with 2 different wiring situations. It could have come with a tow package that included a 7-Way trailer connector, or it did not come with a connector at all. To add a 4-Way to a model that does not have tow package, you would need # 118323 that you have referenced. I have included a link to the installation details and a link to a video that shows a typical installation. The harness plugs in line with the tail light wiring behind each tail light.
  view full answer...
• Does Trailer Wiring for 2007 Mitsubishi Raider Sense Varying Voltage for Brake Light Activation
  The trailer wiring harness part # 118323 that you referenced is the correct harness for your 2007 Mitsubishi Raider. It does not have a converter on the harness though so that indicates that it picks up a stoplight circuit directly from the harness and the vehicle does not use variable voltage for stoplight activation. That style of taillight circuit is referred to as multi-plexed.
  view full answer...
• Is the Tow Ready Custom Fit Vehicle Wiring # 118323 Compatible with a 2007 Dodge Dakota
  The Tow Ready Custom Fit Vehicle Wiring, item # 118323, for your 2007 Dodge Dakota will not cause any problems with the vehicle circuitry or cause any fault codes to display on the vehicle computer system as long as the connectors are installed properly. Many of our customers have the same concern. All of the wiring harnesses we sell are tested by the manufacturer to work with the vehicles wiring and if we notice a problem with a harness we let them know immediately. We sell several of...
  view full answer...
• Can a T1 Trailer Wiring Harness be Installed on a 2005 Dodge Dakota with Factory Tow Package
  You can install the T1 connector, # 118323, on your 2005 Dodge Dakota without disconnecting the factory wiring harness. It might be easier and more cost effective to determine what the issue is with the factory wiring harness. Some common problems are corrosion in the vehicle and/or trailer side connectors. Corrosion can build up in the plugs and behind them where the wires connect where you cannot see it. This can cause a poor connection and can lead to any number of problems. If the...
  view full answer...
• Trailer Hitch Recommendation for 2011 Ram Dakota
  Our most popular trailer hitch for your 2011 Ram Dakota is the Curt Class III Receiver Hitch # 13229. This hitch offers a 2 inch hitch receiver with a 500 pound tongue weight capacity and 5,000 pound towing capacity. It is important to keep in mind that the vehicle's towing capacity should not be exceeded when choosing a trailer to tow. The # 13229 hitch is also compatible with weight distribution systems. Many of our customers have chosen this hitch for their Dakotas and have given great,...
  view full answer...
• Manufacturer of 3-Pole Connectors in 2008 Dodge Dakota
  The Curt trailer wiring harness # 55323 and the TowReady harness # 118323 that you referenced both use the same 3-pole connectors as those shown in your photo. These connectors fit the taillights on your Dakota. They also fit various other models of Dodge, Chrysler, Plymouth and Mitsubishi. With these connectors inserted the vehicle lighting signals will reach the 4-pole trailer connector to power trailer lights. According to my contacts at these companies the connectors are almost surely...
  view full answer...
  
• Recommended 2" Hitch for 2006 Dodge Dakota
  To add a 2" hitch receiver to your 2006 Dodge Dakota I recommend using the Curt # 13230 because of the durability of Curt hitches when it comes to the powder coating; this ultimately helps protect the hitch from dings and scratches that might lead to corrosion that can otherwise reduce the life of the hitch. This hitch is a Class III hitch that is a custom fit for your Dakota, so no drilling will be required during installation. There are some other parts you may not have to get a complete...
  view full answer...
• Does Curt Trailer Hitch for 2005 Dodge Dakota Come with Installation Hardware
  Yes, the Curt trailer hitch # 13229 does come with the necessary hardware for installation on your 2005 Dodge Dakota. I have included a link to a video showing an example installation for you. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball...
  view full answer...
  
• Trailer Hitch and Wiring to Tow a Rental Trailer with a 2007 Dodge Dakota
  The Curt trailer hitch # 13229 is a great value for your 2007 Dodge Dakota and is more than capable of towing a rental trailer. The hitch is rated for 500 pounds tongue weight and 5,000 pounds gross trailer weight. Compare that to the truck's towing capacity (in the owner's manual) and go by whichever rating is lower; the hitch or the truck. Uhaul requires a hitch on the vehicle as well as a functional trailer wiring harness. You can add a 4-Way flat trailer connector using # 118323. The...
  view full answer...
• 1994 Chrysler Town & Country Van Trailer Hitch and Wiring Option
  We only have the one hitch available for your 1994 Chrysler Town and Country and that's the Curt # C13037 which has a 2 inch opening and does not allow a full size spare to fit with it. So your best option is this hitch which most ball mounts and accessories are made for this size so in that regard it will work great. You'd want to track down a mini spare. Then for trailer wiring the # 118323 is a fit that will install easily and is very reliable. If you wanted to do some towing you...
  view full answer...
• Installation Instructions for the Draw-Tite Hitch 75251 on a 2011 Dodge Dakota
  I would be happy to help you. The Draw-Tite item # 75251 is a confirmed fit for your 2011 Dodge Dakota and does not require a lift to install it. I have linked an instruction video below that will help you understand the process involved with doing this installation. Our guys use a lift to better demonstrate how the hitch is installed. If you can slide underneath the truck you won't need to lift it off the ground. You can also use jacks to get some additional clearance as well. You will...
  view full answer...
• Parts Needed to Install 7-Pin Wiring Harness for a 2005 Dodge Dakota
  If you have the factory tow package, you can use part # 32145. If you do not have the factory tow package and do not have an existing 4-pole and you want to wire up your vehicle for a brake controller, you will need the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, item # 118323, for your vehicle, the, item # ETBC7, Brake Controller Installation kit, which includes the 7-Way and all of the wiring and hardware needed to complete the installation, and a brake controller of your...
  view full answer...
• Wiring a 4-Way connector on a 2006 Mitsubishi Raider
  The taillight wiring colors for your truck could be any color, manufacturers change wiring colors for many different reasons and often within the same model year. To determine the correct wires to use on your vehicle you will need to use a circuit tester, item # PTW2993 if needed, and test the wires behind the vehicle tail lights. On the driver's side you should be able to find a wire that carries the left turn/brake signal and a wire that carries the running light circuit. Connect the...
  view full answer...
• Recommended 7-Way Trailer Connection and Trailer Brake Controller for 2004 Dodge Dakota
  Since your 2004 Dodge Dakota does not have the factory 7-way option, you will want to start with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118323. This is a simple installation behind the tail lights of your Dakota. Once you have the 4-way, then you will use the Universal Brake Controller Wiring Kit # ETBC7. This kit will come with all the wire, circuit breakers, and connectors needed to add your 7-way connection. Then if your trailer has brakes, you will...
  view full answer...
• What Do I Need to Install the Prodigy P3 Brake Controller on My 2004 Dodge Dakota Sport 4WD?
  Great choice! The Tekonsha Prodigy P3, # 90195, is the most popular brake controller for your 2004 Dodge Dakota Sport 4WD. It comes will all the bells and whistles like the LCD digital display, automatic leveling and 360 vertical mounting range. Since you don't have a factory connector on your truck, you will need to install a 4-Way trailer connector like part # 118323. This is a custom harness designed to plug in behind your Dakota's tail lights. To power your electric brakes, you...
  view full answer...
• Brake Controller and 7-way Connector Wiring for 2007 Dodge Dakota Quad Cab Pickup
  You are on the right track. We have detailed instructions and wiring diagrams to help you complete the installation of a brake controller and trailer wiring on your 2007 Dodge Dakota Quad Cab Pickup. You will need to start with a 4-Way connector if you do not already have one. The correct harness for your vehicle is the T-One Vehicle Wiring Harness, item # 118323, which plugs inline with your vehicles tail lights (see instructions link). Once this harness is installed you will need a brake...
  view full answer...
• Parts Needed to Install 7-Way and Brake Controller on 2006 Dodge Dakota
  The first thing you need to install is a 4-way on your 2006 Dodge Dakota which for that you'd want the Tekonsha part # 118323 and you'd be set. Then to convert the 4-way to a 7-way you'd need the part # ETBC7 which also comes with everything needed to install a brake controller like our very popular P2 part # 90885. The # ETBC7 will also allow you to have a 4-way as well.
  view full answer...
• Parts Needed To Install Brake Controller In 2007 Dodge Dakota
  You can indeed install a brake controller on your Dakota. The installation is not terribly difficult, if you're fairly handy, you shouldn't have any trouble completing the installation. You'll need a brake controller, a functional 4-pole trailer connector and our Brake Controller Installation Kit, part # ETBC7. For a controller, I'd recommend a proportional controller like the Tekonsha Prodigy P2, part # 90885. A proportional controller can sense how quickly the tow vehicle is braking,...
  view full answer...
• Parts Needed to Install a Trailer Brake Controller on a 2006 Mitsubishi Raider
  I spoke with my contact at Tekonsha and he stated that they have not tested the brake controller wiring harness on a 2006 Mitsubishi Raider. So, while it is possible that it will fit if the truck has a factory tow package that includes a 7-Way trailer connector, since it has not been tested I cannot say for sure if it will or not. Instead, you can hardwire the controller. If the truck does not have a trailer connector, you will need to first install # 118323. I have included a link to...
  view full answer...
• Installing an Electric Brake Controller on a 2010 Dodge Dakota
  It sounds like you're looking to add an electric brake controller to your 2010 Dodge Dakota. The brake controller I suggest is the Prodigy P3 # 90195. It's one of the most reliable controllers on the market as well as the easiest to use because of the LCD. If your Dakota has a factory 7-way trailer connector already on it then you'll have a connector under the dash that the harness # 3020-P connects to. This is all you'll need to power your trailer's brakes. I've linked this install...
  view full answer...
• Recommended Trailer Brake Controller For 2004 Dodge Dakota Towing Small Travel Trailer
  For your '04 Dodge Dakota I highly recommend the Tekonsha BRAKE-EVN # TK63VR. This controller is one of the best bang for your buck options on the market as you get a very reliable proportional controller for quite a bit cheaper than the rest of the controllers like it on the market. Being proportional is a big deal as that's what allows the controller to match the braking to the trailer to the braking you're applying to your truck for a super smooth and safe stop each time. Since you...
  view full answer...
• How Does Brake Controller Install in 2004 Dodge Dakota
  If your 2004 Dodge Dakota has the factory 7-way trailer connector at the rear of it all you need to install the P2 brake controller part # 90885 that you referenced is the part # 3020-P. This plugs into the port under your dash which makes installing the controller very easy. If you don't have a factory 7-way way you will need to start with a 4-way (if you do not have one). For that you would want the # 118323. From there you would need to convert the 4-way to a 7-way so that you can...
  view full answer...
• 4-Way and 7-Way Wiring Recommendation for 2005 Dodge Dakota without Trailer Wiring
  You will need to start with a 4-way installed on your 2005 Dodge Dakota. For that you would want the # 118323 which is a plug and play, easy to install wiring kit. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. This also gives option for a 4-way as well. I attached installation instructions and an install video for this product as well. For a...
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?