Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replace a damaged or worn-out rear step pad on your Westin 4" wide, oval tube step with this non-slip polymer plastic pad. The UV-resistant material will not crack or fade. Includes clips for installation.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at Westin's Replacement Step Pads. These are going to be a direct replacement for your old worn out pads on your Westin tube steps. The pads come in varying shapes and sizes, so you'll want to use our website to determine the appropriate pad for your step. The pads are sold individually so you can replace just one, whichever is broken, or go ahead and replace all of them on your tube step. They're made of the same durable UV-resistant polymer plastic as your originals were. And while our old ones crunched and cracked below our feet, our new ones work great.This vehicle here is nine years old, so the tube steps on it are likely eight years and 11 months old.
But, as you can see, there's really nothing wrong with our tube step. Just with the pad that's on top of it here. It's all cracked and coming apart. You can just kind of flake it off like that. Well, with an easy, quick pushpin replacement, we could have brand new looking tube steps making our '09 looks like a '19.To remove your old step head, you're going to need a few things.
You're going to need a prying tool. We're going to be using a flat bladed screwdriver, a rubber mallet or soft face mallet, and having a pair of needle nose pliers can come in handy for a few tricky spots.So we'll start by prying or old step off, which if yours is anything like ours, it comes off pretty easy. But there are still barrel clips inside of our tube step that we need to remove. There's a couple of ways to remove the barrel clips. It's going to depend on your particular tube steps.
Ours here do not go all the way around, being completely enclosed. There's an opening at the bottom so we can just knock ours straight down and they'll fall out to the ground. If yours is completely enclosed, you want to have these needle nose here to pull them out.Before we can replace these, we'll need to crush them so we can get them out. And we'll just continue that all the way down the rest of them. Now, if yours was completely enclosed where you can't just drive them out like we did, you can pull them out the top.
You are still going to need your screwdriver and mallet to crush them, pushing in all the pins inward by crushing it, and then pull it out with your needle nose pliers.We've gone ahead and finished removing this pad, and our back pad also needed to be replaced. We removed it as well. Before we install our new pads, it's a good idea to get all the dirt and debris cleaned off of your step there. We've got some Speed Shine from Griot's here. We're going to just clean it all up till it looks new again. Glass cleaner will work fine for chrome steps like this, but you can pick up some Speed Shine here, which is great for all surfaces, including your vehicle, right here at etrailer.com.Now we're all clean. We're ready to install our new pad. We'll start by placing the new barrel nuts that come in your kit down in the holes. So you just want to get that started and use your rubber mallet to just tap it in place. We'll repeat that for all the remaining holes. And a little tip, if you have them offset like when you here, the ones that are closer to the door can be easier to install if you actually open that door there, giving you a little more room to get your swing straight down on the nut.We'll now take our new step, and you want to line up all the pegs on the bottom of your step with your barrel nuts. Now you can't just press them in there. We're going to actually tap it in there with our mallet, but we need to make sure that they're all lined up before we begin doing that so we don't break any of them off.Once you've got them all lined up, you'll take your rubber mallet, and you just want to tap it down. Double checking if you're having anything that's not quite going all the way to make sure it's still lined up. And there you have it. With this side looking like new, we can go ahead and repeat the same process on the other side. And that completes our look at Westin's Replacement Step Pads.
Average Customer Rating: 4.7 out of 5 stars (14 Customer Reviews)
Replace a damaged or worn-out rear step pad on your Westin 4" wide, oval tube step with this non-slip polymer plastic pad. The UV-resistant material will not crack or fade. Includes clips for installation.Easy installation. Perfect fit for rear step pad. Customer service is awesome.
Product was exactly what I wanted, came with all the hardware to install properly. I will definitely order from etrailer corporation again!
Thanks!
Barrel clips were a little difficult.. But after a while it worked great! Great product! Great customer service!
Everything fit exact. Fast delivery.
actually not the right part i needed. But it worked. I glued it on. looks ok
Only place that had the pads,came without the clips but I contacted them and they sent a set to me. Awes9me!
Item installed easily and still looks great after one year.
Troy was very helpful in finding the right step I needed after I ordered the wrong set thanks Troy!
Product precisely as advertised and delivery prompt without excessive charges.
Perfect fit and easy to install
Product worked great and the customer service is beyond exceptional!!! Will be doing business with them in the future.
Fast delivery and replaced 10 year old step
Product was delivered in a timely manor. Great condition.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Don M.
9/28/2017
Just great, thank you