Expert Answers about Honda Accord

• Transmission Cooler for 2005 Honda Accord V6.
• The Derale # D13611 transmission cooler isn't designed to replace the factory transmission cooler, it's designed to supplement it. The cooler installs inline on the return line from the factory cooler back to the transmission. The heat exchanger portion would ideally be installed directly behind the grillwork, in front of the radiator. If you use the provided link, my buddy David will run through how the cooler works. I'll also link to some help articles about transmission coolers.
  view full answer...


• Parts Needed to Tow a Trailer with a 2005 Honda Accord and Draw-Tite Hitch 24787
• The 2005 Honda Accord would not come standard with a trailer wiring harness. In addition to the 24787 hitch, you will need a few more items to complete the towing setup. First, you will need a ball mount. Ball mounts are inserted and pinned into the hitch and provide the platform for the hitch ball. The proper ball mount for your 2005 Honda Accord with the hitch you were looking at is part # 3592. Check the trailer you will be towing and find out what ball size you need. Make sure the...
  view full answer...


• Hitch Ball Shank Diameter and Recommendations for CURT Class I Trailer Hitch # C11205
• The CURT Class I Trailer Hitch, # C11205, comes with the CURT Mfg. recommended ball mount, # C45521, which uses a hitch ball with a 3/4 inch diameter shank. For a trailer with a 1-7/8 inch coupler, you can use the CURT hitch Ball, # C40001, and for a trailer coupler that uses a 2 inch ball you can use the CURT Hitch Ball, # C40018.
  view full answer...


• Are Rubber Adjusters Needed for Tire Chains on a 2003 Honda Accord
• There were several different tire size options available for the 2003, including tire size 195/65-15. Check the side wall of your tires to make sure that is the size they are. If you have a different size, let me know and I can recommend a different set of chains. If you indeed have 15 inch wheels then the Rubber Adjuster # PW100 is easy to fit and tighten the chains and keep them in place. I have included a link to our tire chain FAQ article for you.
  view full answer...


• Recommended Fairing for Rola Roof rack on a 2009 Honda Accord Sedan
• Yes! Out of the variety of fairings that we have to offer I recommend the 40" long Inno Fairing # INA261 because it will fit perfectly with the 38" long Rola Sport Series Roof Rack # 59757 for your 2009 Honda Accord. If you let me know what you are wanting to use the roof rack for I can make additional recommendations for you. I have also attached an installation video and a picture of this roof rack on a 2009 Accord Sedan that you can reference.
  view full answer...


• Base Plates, Tow Bar, and Accessories Needed to Flat Tow a 2001 Honda Accord
• the first thing you will want to do is consult the vehicle owners manual to determine the proper towing procedure for your 2001 Honda Accord. From what I could find, the vehicle can be flat towed but has not been formally tested. To flat tow a vehicle you will need base plates, a tow bars, safety cables, a lighting solution, and supplemental braking. First, you can use base plates # 1545-1. The base plates provide a safe and secure attachment point for the tow bar. For a compatible tow...
  view full answer...


• Parts Needed to Tow with a 2015 Honda Accord EX V6
• Out of the available trailer hitches for your 2015 Honda Accord I recommend going with the Curt Trailer Hitch Receiver # C11681 over the Curt item # C11496. They are both identical in Class and weight ratings and come with a 1-1/4" receiver. Please note that Class I trailer hitches are only rated to carry up to 2 bikes. The Curt warranty requires a Stabilizer Strap # 18050 for all non-supported loads, like the Yakima HoldUp # Y02443, but it doesn't have the weld stop inside the receiver...
  view full answer...


• Recommended Replacement Feet for Thule Crossbars on 2014 Honda Accord Sedan
• If you've got Thule WingBar Evo crossbars like the # TH711400 then you'll need the Replacement Foot for Thule Evo Roof Racks - Naked Roofs - Qty 1 # TH69FQ, which require a fit kit- the Fit Kit for Thule Evo Clamp Roof Rack Feet - 5208 # TH145208. If you've got a different crossbar that are not Thule, then let me know and I can see if we can locate a solution for your crossbars.
  view full answer...


• 2 Inch Hitch Needed to Carry 2 65-lb E-Bikes on 2015 Honda Accord
• Unfortunately, our manufacturers don't offer a 2 inch hitch for your 2015 Honda Accord. If you can remove the battery packs and somehow get the weight of the bikes down to 65lbs each or less, we have a solution that would work for you. You'd first need a Class I hitch like the # C11681 which has a 200 lb tongue weight capacity. For a rack, the Thule EasyFold, part # TH903202 can accommodate 2 bikes weighing up to 65 lbs each with tires up to 3 inches wide. For tires up to 4-11/16 inches...
  view full answer...


• What Parts are Needed to Flat Tow a 1996 Honda Accord
• I checked with the flat towing authority REMCO and they have the following statement on the 1996 Honda Accord, front wheel drive, manual and automatic: Towable as is. No formal testing. No known problems. Follow Honda procedures found under emergency towing section in the owners manual. Hybrids/CVT transmissions are dolly only. Be sure to consult your vehicle owners manual to determine if this is correct. If you determine you can flat tow the vehicle as is you will need base plates. Use...
  view full answer...


• Roof Rack Systems Thatll Work On a 2006 Honda Accord W/ A Naked Roof
• We do have a couple of options that'll work great with your naked roof on your 2002 Honda Accord Sedan. You can choose from either the SportRack Semi-Custom Roof Rack for Naked Roofs # SR1002 which measure 50" long, 1-1/4" wide, and 7/8" tall or the Inno Square Crossbars # INB127 with the Inno Feet for Square Crossbars # INSUT and the Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet # INK249; which boast the same measurements. The only difference between the is going...
  view full answer...


• Replacement Exhaust System for 2004 Accord Sedan with 3.0L V6 Engine
• Exhaust tips are really just cosmetic trim items that provide visual appeal. It sounds more like your entire exhaust/muffler has an issue since the tip alone would not really change how loud the car is. The MagnaFlow exhaust system # MF15800 you referenced is a complete stainless steel exhaust that does fit the 2004 Accord sedan with 3.0L V6 engine and this would replace your factory exhaust from the outlet of the catalytic converter to the tailpipe. This includes dual mufflers and it...
  view full answer...


• Parts Needed to Install a Rhino-Rack Roof Rack on a 2003 Honda Accord
• The only parts that you need to install the Rhino-Rack Vortex Aero crossbars, # RRVA118B-2, on your 2003 Honda Accord are the 2500 Series Leg Kit, # RRRLKVA, and the Custom DK Clamps and Pads, # DK030, that you referenced. You will not need any additional parts other than a bike rack, ski/snowboard carrier or cargo carrier depending on what you plan on carrying. When choosing roof mounted accessories, there are a few things to keep in mind. First, the Rhino-Rack roof rack will have a crossbar...
  view full answer...


• What Base Plates and Tow Bars are Needed for a 1993 Honda Accord
• We carry RoadMaster base plates as they are one of the oldest and most respected in Tow Bars and Base Plates. Assuming your Accord is not a station wagon, you would use part # 1506-1 for base plates. They are the standard style base plates and are the least expensive for your vehicle. I would suggest the RoadMaster Tracker Tow Bar, part # RM-020 it is a basic, but strong tow bar that should serve your purposes well. It will handle vehicles up to 5,000 pounds which should be plenty for...
  view full answer...


• How to Tell LED From Incandescent Taillights to Choose Trailer Wiring Harness on 2015 Honda Accord
• There a few different ways to determine this. You can have a helper activate the turn signals, running lights and brakes. If a single bulb lights for each function (on each side of the car) then you have incandescent lamps. If you have LED's each function will be illuminated by many, smaller lamps. I'll provide you with a photo showing an incandescent lamp next to an LED version of the same lamp. The lamps shown are on a trailer, not a car but you'll get the idea. Or, you could open the...
  view full answer...


• Does the SportRack Roof Rack part # SR1010 Come with Everything to Attach to a 2013 Honda Accord
• The SportRack roof rack part # SR1010 that you referenced comes with everything needed to install on your customers 2013 Honda Accord. This rack has a capacity of 130 lbs which would be enough for the dingy your customer is planning on carrying, but they will need to consult the owners manual of the vehicle to determine what Honda recommends for the roof capacity and be sure not to exceed that figure as well. I attached an install video for this rack for you to check out also.
  view full answer...


• Replacement Heated Mirror for 2007 Honda Accord Sedan
• We have the exact mirror you need, though you didn't mention which side so I'll list both options for you. The K-Source Replacement Side Mirror - Electric/Heated - Black - Driver Side # KS63576H and K-Source Replacement Side Mirror - Electric/Heated - Black - Passenger Side # KS63575H are OEM replacements that are confirmed to fit your 2007 Honda Accord sedan and will work perfectly for you.
  view full answer...


• Parts Needed to Flat Tow 2015 Honda Accord Sedan
• The Blue Ox Base Plate Kit # BX2260 referenced in your question is confirmed to fit your 2015 Honda Accord Sedan. Installation of this base plate kit does require some trimming of the bumper fascia along with some minor drilling. I have attached the complete written installation instructions for you to check out so you can see exactly what the process will entail. These custom-fit base plates will provide attachment points for the tow bar and feature hidden reinforcements for a nice, sleek...
  view full answer...


• Parts Needed to Flat Tow a 1988 Honda Accord
• As long as your copy of the owner's manual for your 1988 Honda Accord says it's okay to flat tow your vehicle then we have the parts you'll need to do so. I don't have access to that old of a manual to check on my end. For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. For your motorhome you need to make sure it has a hitch rated for the curb weight of your Accord...
  view full answer...


• Recommended Drawbar For A 2015 Honda Accord Towing A 550 Pound Boat Trailer
• With The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 inch # C11681 installed on your 2015 Honda Accord The Curt Class I Drawbar - 5 inch Rise - 11-9/16 inch Long - 2,000 pounds # C45025 would work for you. The drawbar has a tongue weight up to 200 pounds which will work perfect with your 550 pound boat trailer. The drawbar has a corrosion-resistant, black gloss powder coating. You also need either The 1-7/8 inch ball # C40001 or The 2 inch ball # C40018 for the draw bar....
  view full answer...