The distance from the hitch pin hole of the Swagman bike rack part # S64650 to the nearest wheel hoop is 10-1/2 inches. The shank of this rack also has a rise of 4 inches built into it. The tires of your bikes would be far enough away from the exhaust that you wouldn't have any problems.
With this bike rack we have not had any issues with exhaust so I can confidently say you will be fine.
If you do not have a hitch already you would want the Draw-Tite part # 24914 which has been confirmed... view full answer...
My contact at TowReady confirmed that the 2006 Mazda 3 Grand Touring models have differently shaped connectors than the standard models, so the # 118420 wiring harness would not be able to be installed on your vehicle.
I recommend using taillight converter # C56175 to wire your vehicle for towing.
I have included a link to the installation instructions for the converter. view full answer...
Your Mazda 3, if equipped with the factory wheels and tires, you can use either the Thule CB12 Size 090 chains, part # TH01221090 or the Thule K-Summit Chains part # TH02230K23.
The K-Summit Chains are the easiest and quickest chains to install. The CS10 chains are self-tensioning so unlike basic sets, these chains will tighten themselves. They take more time to install, but they are less expensive when compared to the K-Summit chains. view full answer...
Yes, the Thule Caprock S # TH95YE is compatible with AeroBlade Edge bars like the # TH7601B. The bars measure 3-1/8" wide x 1-1/8" tall and the Caprock adapters work with bars between 3/4" and 1-7/8" tall and up to 3-1/4" wide. You will be limited by the 165 lb capacity of the bars or your roof capacity, whichever is lower. view full answer...
I went out to the warehouse and confirmed that the Flair-It Plumbing Cap Fitting # FL73VR does indeed have threads and would have to thread onto a fitting to be installed. view full answer...
The Draw-Tite Class I hitch, part # 24984 is a fit for all models of the 2021 Mazda 3 according to Draw-Tite. Usually, the on the more sporty models of small cars, the dual exhaust can present a fit problem, but as you can see in the linked installation instructions as well as the provided photo, the hitch fits perfectly with a dual-exhaust equipped vehicle. The receiver tube is hard to see, so I've circled it in red.
If you'll be using the hitch for light duty towing, you'll also need... view full answer...
To use a rooftop cargo bag on your Mazda5 minivan with sliding doors, you'll need an option from Rightline, which installs with clips to a naked roof. You will need to ensure your vehicle has weather molding which you can attach the clips underneath as well. You can see in the linked instructions how to attach the clips. Your options for a rooftop bag are:
- Rightline Gear Sport Jr. Rooftop Cargo Bag - Waterproof - 10 cu ft # RL100S50
- Rightline Gear Sport 3 Rooftop Cargo Bag - Waterproof... view full answer...
The Appearance Package would dress up the exterior of your 2011 Mazda MX-5 Miata by giving you a front air dam, side skirts, and a rear under skirt (which it looks like you have).
If you do not have the Appearance Package then the Curt Class I Receiver Hitch # C11028 is a confirmed fit for your Miata. There is some modification required which is reflected in our installation notes:
Drilling required for installation
Fascia trimming required for installation
Exhaust must be temporarily... view full answer...
There are three different style's of transmission coolers; remote mount, standard mount, and pan mount. The most common cooler we have is a standard mount cooler that will need to be positioned on the front of the vehicle where airflow is sufficient. A remote mounted transmission cooler can be located anywhere on the vehicle as the included fan will ensure the proper amount of airflow is received. The last type of transmission cooler we offer is a pan mounted cooler which replaces your... view full answer...
The Curt Trailer Hitch Receiver item # C13315 you were looking at is a great option for your 2021 Mazda CX-5 but I recommend going with the etrailer Trailer Hitch Receiver item # e98902. These hitches are identical with the exception that the etrailer hitch has a matte black finish that is not only more durable but also looks better once installed. This hitch is custom fit and bolts directly to your Mazda with included hardware. You will have no problems pulling your canoe trailer with... view full answer...
The Curt Trailer Hitch Receiver # C13284 is a confirmed fit for your 2022 Mazda CX-9. I verified this with Curt. When we installed this on a 2020 CX-9 we found the receiver height to be 13-1/2" from the ground. I recommend the etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit # EBMK4 as its 2-3/4" rise will put you at 16-1/4" and most trailers have a 16" coupler height.
You will also need the T-One Vehicle Wiring Harness # 118278 to operate the trailer lights on the U-Haul trailer. The Mounting... view full answer...
The etrailer Trailer Hitch Receiver part # e98902 is what I recommend for a 2016 Mazda CX-5. It offers a bolt-on fit with no cutting or drilling required. It fits both pre and mid-year models so you don't have to worry about checking this but if you want to know, the date of manufacturer will be on a white sticker in the door jamb. This hitch will then work great for towing or hitch mounted accessories. view full answer...
I checked with my contact int he engineering department at Curt Manufacturing. I was told that the # C11028 IS indeed compatible with the power retractable hard top models. It is also compatible with dual exhaust equipped models. However, if your MX5 Miata has the appearance package (ground effects package) the hitch will not fit.
If your vehicle has the appearance package, there is unfortunately no hitch application available.
If you will be using the hitch as an attachment point for... view full answer...
According to Curt the Item # C13284 hitch you were looking at stopped fitting the CX-9's after the 2022 model year. The correct hitch for your 2023 Mazda CX-9 is the Draw-Tite item # 76020. This hitch is custom fit and bolts to your Mazda with included hardware.
This is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity and a 675 lbs maximum tongue weight. This hitch can be used with weight distribution systems but that will not increase its capacity.
I have linked... view full answer...
The adapter # RM-032 is a match for the EZ4 base plate kit that fits your 2016 Jeep Wrangler Unlimited, part # RM-521448-4. There is no adjsutment to be made.
If you need other parts to setup the Jeep to be towed I recommend using the Hopkins wiring kit, part # HM56200, for lighting. It plugs in behind the Jeep's tail lights and provides a 4-way at the front to connect to the RV. You also need a Brake-Lite relay, part # RM-88400, to keep the Wrangler's lights from overriding the RV's.... view full answer...
Yes, the Tekonsha T-One Vehicle Wiring Harness # 118587 that you referenced is confirmed to fit and will work perfectly on your 2016 Mazda 6 GT with the LED tail lights. This custom harness will plug right into existing ports behind the tail light assemblies and receive power by running a hot lead up to the battery.
This will provide you with the needed 4-Way connector for powering a trailer's basic signal lights.
I have attached the full install manual below that you can also look through. view full answer...
The 20x47 Reese Cargo Carrier part # 63155 weighs 44 lbs. This carrier is rated class I and class II. The Draw-Tite Sportframe Trailer Hitch Receiver part # 24843 is a class I hitch so it will work. You should not exceed 156 pounds of cargo. view full answer...
The most affordable wheel mount bike rack option is Malone Pilot TC ST Roof Bike Rack part # MPG2103. The universal brackets fit round, square, aero, elliptical, and most factory crossbars including the aero bars of your Rola GTX 59767. The Malone's adjustable wheel holders accommodate 20" to 29" Wheels with up to 5" wide fat tires. The aluminum construction of the rack weighs 10 lbs compared to other roof mount bike racks that can weigh up to 20 lbs for vehicle's with lower roof capacities.... view full answer...
I recommend going with the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" # EH55VR. It has a 2 inch receiver that will be able to take any accessory and gives you the option to pull a trailer if the need ever comes up in the future. It also has a sleek look and almost appears to be a factory component. I like that because it doesn't stick out and isn't hard to miss.
My second choice would be the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C49CR.... view full answer...
Go To Results