The Yakima landing pads that are recommended for your 2011 Mazda 2 would be the LandingPad 11 for Yakima Control Towers # Y00233.
If you want the rest of the rack components you would also need the following:
Round 48 Inch Cross Bars Pair # Y00408
Yakima SkyLine Towers Roof Rack Feet # Y53TR
RoundBar SL Adapter, part # Y03536 view full answer...
According to Thule, the Archway 2 Bike Rack, # TH910XT, will fit your 2012 Mazda 2. To install this bike rack on your vehicle, you will want to place the lower arm of the bike rack on the upper tier of the bumper.
You will see 6 straps. The upper straps will hook to the top edge of the rear hatch. The side straps will hook to the side and the bottom straps will hook to the bottom of the rear hatch.
Keep in mind, it is not recommended to open the rear hatch with the bike rack installed.... view full answer...
The Thule Passage 2 Bike Carrier Part # TH910XT will fit your 2011 Mazda 2 Hatchback. I have attached the installation instructions and a video link demonstrating the features (of the 2-bike version).
If you will be transporting bikes for women or children, or bikes that have alternative style frame construction (with no main horizontal top frame tube) you might benefit from using an adapter bar, such as the Yakima Tube Top, part # Y02531. This device installs between the seat and handlebar... view full answer...
The SportRack Semi-Custom Roof Rack # SR1010 will work straight-up without any adapters on your 2012 Mazda 2 hatchback and allow you to carry a canoe, so long as you remain under its 130 lb weight capacity.
There are canoe carriers you can use that work as loadstops; foam blocks are an option as well but do not offer the same type of security which is why I strongly recommend the Malone BigFoot Pro Canoe Carrier with Tie-Downs # MPG112MD.
The Malone carrier uses brackets which are loadstops... view full answer...
I can help you figure out what which ball mount you will need for your Mazda and Coleman popup camper.
There's some specific measurements to take to determine the rise/drop of ball mount you need. Measure from the inside top of the receiver tube to the ground. Then, with the trailer jacked so that it's level, measure the distance from the underside of the coupler to the ground. The difference between the two measurements is the rise/drop needed. If the coupler height is taller than that... view full answer...
Technically speaking, the Swagman # S64720 will fit the Rola Crossbars. The U-bolts have an inside dimension of 3-1/8 inches which is exactly the same as the width of the crossbars. The U-bolts will be very tight against the edges of the crossbars and could possibly damage them.
The Swagman Race Ready # S64705 might be a better choice. The rack will fit your 3-1/8 inch wide Rola Crossbars with a bit of room to spare. This rack is also a bit more substantial and would do a better job holding... view full answer...
Yes, the Swagman XC 2-Bike Rack part # S64650 will work with the Curt Trailer Hitch Receiver part # C11073 you have on your 2012 Mazda 2. However, in order to maintain Curt's warranty claim you will also need to use the support strap part # 18050 when attaching a bike rack or cargo carrier to this hitch.
The Swagman XC is an excellent rack that will work well for most types of bikes. It has padded uprights to secure the bikes without damaging the frame and adjustable wheel hoops for use... view full answer...
I don't know the model year of your Mazda 2 hatchback, but I can confirm that the Hollywood Racks Express 3 Bike Rack - Trunk Mount # HRE3 will fit model years 2011 - 2014 Mazda 2 Hatchback, 5-Door. With this rack, I recommend using the Thule passive security strap # TH533 to secure the rack to your locked hatch. I also recommend using a cable lock like # e98891 and an adapter bar like # 64005 for any step-thru frame bikes. view full answer...
Yes, I confirmed with Yakima that there is a roof rack available for your 2012 Mazda 2 that uses Yakima Round 48 inch Crossbars part # Y00408.
To complete the roof rack you would need the following parts:
LandingPad 11 part # Y00233
Yakima SkyLine Towers # Y53TR
Yakima RoundBar SL Adapter # Y03536
I confirmed this with Yakima. view full answer...
Go To Results