Yes, the RoadMaster Black Receiver Inserts for MX and XL Brackets part # RM-200-5 will work with the Roadmaster Crossbar-Style Base Plate Kit. view full answer...
The Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 711-4 are compatible with quick disconnects and almost all Roadmaster tow bars, including the Roadmaster Tracker Tow Bar - 2" Ball - 5,000 lbs # RM-020. view full answer...
The adapter # RM-032 is a match for the EZ4 base plate kit that fits your 2016 Jeep Wrangler Unlimited, part # RM-521448-4. There is no adjsutment to be made.
If you need other parts to setup the Jeep to be towed I recommend using the Hopkins wiring kit, part # HM56200, for lighting. It plugs in behind the Jeep's tail lights and provides a 4-way at the front to connect to the RV. You also need a Brake-Lite relay, part # RM-88400, to keep the Wrangler's lights from overriding the RV's.... view full answer...
The Saris SuperClamp EX Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Wheel Mount, part # SA4025F, you attached to your question is an excellent choice. It has a rise of 5" from the shank. The 5" in shank rise should be enough for your bike tires to avoid being heated by the exhaust. You will not find a more significant rise without adding a hitch extender, but keep in mind when you add a hitch extender you reduce the maximum tongue weight of your bike rack by 50%.
I have included a... view full answer...
Roadmaster replacement crossbar/adapter # RM-025 will fit the XL base plates you have, # 711-4. But in order to make the XL arms easily removable with this bar you will also need Quick-Disconnects # RM-201.
I took some measurements of the bar and have included a picture showing them. The distance from the center between 1 set of tabs and the center of the other set is 30-5/8 inches. view full answer...
According to Magnaflow, the Stainless Steel Direct-Fit Catalytic Converter, # MF23684, will fit your 1990 Mazda Miata, but it is not CARB (California Air Resource Bureau) compliant. At this time we do not have a catalytic converter for your Miata that is CARB approved.
I have linked you to our series of FAQ articles about Catalytic Converters. view full answer...
The Roadmaster Crossbar-Style Base Plate Kit part # 711-2 or part # 711-4 which are fits for a 1991 Mazda Miata will work with a Blue Ox tow bar if you use adapters, the RoadMaster Base Plate to Blue Ox and Demco Tow Bars Adapter part # RM-033 with Roadmaster Tow Bar Quick Disconnect Kit part # RM-201. view full answer...
There are a number of parts needed in order to flat tow your 1990 Mazda Miata, which I'll list for you:
- Base Plate Kit: Roadmaster Crossbar-Style Base Plate Kit # 711-4
- Tow Bar: etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates # e44ZR
- Wiring Kit: Roadmaster Wiring Kit # RM-152-1676-7
- Supplemental Braking System: Brake Buddy Select 3 Portable Supplemental Braking System # HM39524
The base plates will be installed on your '90 Miata to give it an attachment... view full answer...
The Kuat Beta 2 Bike Rack, # B202-114, will fit on your 2001 Mazda Miata. The trailer hitch on your Miata is likely a Class I trailer hitch with a 1-1/4 inch receiver, which is compatible with this bike rack. The Kuat Beta is an excellent choice because the tongue weight capacity of a Miata is very low. At 13 lbs, you will not have to worry about the bike rack taking up too much weight.
I have attached a demonstration video of this bike rack for you to check out.
If you plan on carrying... view full answer...
We do! For your application you first need to install the Curt Trailer Hitch Receiver # C11749 on your 2003 Mazda Miata Convertible. Once installed this allows us to use a hitch mounted bike rack.
If you don't already have a bike rack then I recommend the following for different styles:
- Hanging Style - Kuat Beta # B202-114
- Platform Style - Hollywood Racks Destination # HLY94FR
Both racks are lightweight for their style and they are rated for use with a Class I hitch receiver like... view full answer...
Yes, the Roadmaster Crossbar-Style Base Plate Kit # 711-4 for your 2001 Mazda Miata is compatible with both the 2" Hitch Ball # RM-501 and 2-5/16" Hitch Ball # RM-504 versions of the StowMaster tow bar. I reached out to my contact at Roadmaster who did say that it will fit but he is afraid that you will be putting too much weight at the front of your Miata since the tow bar stows there. He recommended going with a motorhome mounted tow bar like the Falcon 2 # RM-520 instead since it stores... view full answer...
The design of the Curt Vertical Trailer Hitch Receiver w/ Drawbar part # C11746V was designed specifically to promote the best ground clearance possible. I apologize but I was unable to come up with any pictures of it installed. I checked on our site, checked with Curt, and checked the web but came up dry.
One thing to keep in mind is that this hitch is really not the one to use for a bike rack because of the receiver design. There would be no way to connect the rack to the hitch.
For... view full answer...
One of the nice features about the Rightline Jr. Cargo Bag # RL100S50 is the multiple options for securing it to your car. Due to the limited interior space of your Miata I recommend using the car clips (included). Please measure the roof of your Miata to make sure that this bag will fit; it is listed as 36 inches long by 30 inches wide.
This rooftop cargo bag can hold up to 9 cubic feet of additional gear or baggage when attached to your car. I would advise checking your owners manual... view full answer...
In order to determine if the Replacement Steps, Motor, and Switch for Kwikee RV Electric Steps # LC3722617 will fit your 2014 Winnebago View or not you're going to first need to make sure that you have a mounting space of at least 25-1/2" wide and 11-3/8" deep.
Then once that is determined, you'll need to measure the entry height by measuring from the mounting point to the ground. This number should roughly match the height of the steps when they're fully extended plus 6-8" for the drop... view full answer...
There are a number of kits that are confirmed to fit your 1990 Mazda Miata that contain all the necessary diodes. I recommend the Roadmaster # RM-154, which has four Hy-Power diodes and a 4-way flat connector for both your Miata and RV.
I've included a link to a video review of this kit, as well as a link to a video showing an example of an installation. view full answer...
If you don't have trailer wiring, I recommend the Upgraded Circuit Protected Tail Light Converter Hardwire Kit with 4-Pole Connector (Includes Tester) # 119178KIT. This kit will give you the adaptation needed to make the 3 wire system with separate turn and stop lights in your Miata work with a 2 wire system that is standard tail light wiring on a trailer. This has a short circuit protection safeguard against electrical shorts and mis-wire situations. The circuit tester will help you... view full answer...
Legally this will depend on where you are going to be operating your motorhome but the short answer is yes you will need a supplemental braking system for your 2000 Mazda Miata. I recommend going with a portable system like the Blue Ox Patriot # BLU37TR as you will be able to use it in different vehicles you may tow. Since different states and providences can have different laws regarding either the amount of weight or the required braking distance the safest bet is to just get the system.... view full answer...
The correct base plates to flat tow your 1990 Mazda Miata are the Roadmaster XL # 711-4. These base plates will work with your Roadmaster Falcon All Terrain tow bar # RM-522 using the included quick-disconnects and crossbar. You will also need safety chains, Roadmaster # RM-643 for 68" chains or # RM-645-76 for 76" chains.
For lighting, you can either use magnetic tow lights # TL21RK if you do not plan on towing your Miata often, or Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154... view full answer...
Yes, the Thule Passage 2 Bike Carrier, part # TH910XT, is a confirmed fit for your 1990 Mazda Miata. It has a total weight capacity of 70 lbs for 2 bikes. I am including links to a video review and the installation instructions on the Thule bike carrier.
If you are going to be carrying womens or childrens bikes that do not have the horizontal bar at the top of the frame, you will want to use the Thule Bike Adapter Bar, part # TH982XT. It attaches to the center seat post and to the handlebar... view full answer...
Go To Results