Expert Answers about Mazda CX-30
- Best 1-1/4 Inch Trailer Hitch For 2021 Mazda CX-30 For Bike Rack
- There is a 1-1/4" trailer hitch receiver that fits your 2021 Mazda CX-30, and the best option is one from Curt:
- Curt Trailer Hitch Receiver # C49CR
The reason to go with the Curt # C49CR on your '21 CX-30 is because it has the best ground clearance, and since the rear of your Mazda sits fairly low to the ground, this allows the most room from the ground to the bottom of your bike rack, helping avoid any contact.
This is a Class I, 1-1/4" hitch, so if you don't have one you'll also...
view full answer... - Fitment of Inno Roof Deck Platform Rack # INA510 on 2020 Mazda CX-30 with OEM Crossbars
- There is a way you can definitively determine if the Inno Roof Deck Platform Rack # INA510 fits your crossbars that are elliptical in the front and cut-of square shaped in the back. Since the # INA510 fits both elliptical and square crossbars, the shape of the bars do not make a difference. However, you need to be sure your bars do not exceed 3-1/2" wide x 1-3/8" tall. In order to make sure your crossbars fall within these parameters, I recommend measuring the width and height of your bars....
view full answer... - Does Curt C49CR Fit 2021 Mazda CX-30
- Yes the Curt 1-1/4 inch hitch part # C49CR is a confirmed fit for your 2021 Mazda CX-30 Premium. It actually fits all models.
view full answer... - Which Saris Trunk Rack Fits 2020 Mazda CX-30
- The only Saris trunk rack that fits your 2020 Mazda CX-30 is the Bones EX 3 part # SA803 which has an arm design that works around the spoiler. If you have a standard Bones carrier or any other Saris trunk rack it's not going to fit your vehicle.
view full answer... - Trailer Hitch Receiver for 2021 Mazda CX-30 Turbo
- The Curt Trailer Hitch Receiver # C49CR has been confirmed to fit all models of your 2021 Mazda CX-30. This Class I hitch is designed for light duty towing and is rated for a maximum of 2,000lbs trailer towing and 200lbs of tongue weight, which far exceeds the 959lbs that Mazda gave the CX-30 as a maximum towing capacity.
There is the EcoHitch Hidden Trailer Hitch Receiver # EH55VR for your Mazda. This does have a 2" receiver opening.
I recommend the Tekonsha T-One Vehicle Wiring Harness...
view full answer... - Highway Speed Compatibility of Saris Bones EX3 on 2020 Mazda CX-30
- The Saris Bones EX 3 Bike Rack - Trunk Mount - Adjustable Arms # SA803 is not rated for a maximum speed. It is designed to hold tightly to your vehicle and carry bikes up to 35 lb max each. Your traveling speed won't be restricted at all.
You may also want a bike adapter bar like # SA3040 for any step-thru style frames and Saris Protect-O-Pads for Bike Racks - Qty 4 # SA2060 for the best ride.
If you want to secure your bikes and rack to your vehicle, I recommend the Thule Passive...
view full answer... - Trailer Hitch Receiver Options for 2021 Mazda CX-30
- While there are trailer hitches that fit your 2021 Mazda CX-30, I checked with the hitch manufacturers, and there are no 2 inch hitch options for the vehicle. You do have an option for a trailer hitch that fits your '21 CX-30, but it is a Class I hitch with a 1-1/4 inch receiver:
- Curt Trailer Hitch Receiver # C49CR
view full answer... - Will the Saris Bones Ex2 Fit My 2020 Mazda CX30?
- Yes, The Saris Bones Ex2 will fit on your 2020 Mazda CX-30. Another option you have is using the Saris Bones Ex3. There are color options for the Ex3! Choose between black # SA803 or Red # SAR55FR.
Check out the review video to learn more!
view full answer... - How to Correct Rattling Hitch on 2021 Mazda CX-30
- We've actually seen this before on other trailer hitches, but it's likely going to fall into one of the same fixes for the # DT64MR on your 2021 Mzda CX30. I've linked a helpful article we've put together on fixes like this but you can either re-position the exhaust hanger by unbolting and repositioning to adjust the exhaust so that it is not coming into contact with the hitch. This can be achieved by unbolting the hanger, flipping it and bolting it back to the frame; you can also do this...
view full answer... - 4-Way Flat Vehicle Wiring Harness For a 2021 Mazda CX-30
- We do have the T-One Vehicle Wiring Harness # TK67FR from Tekonsha which is designed to fit your 2021 Mazda CX-30. I have linked an installation video below for this on a 2022 CX-30 which shows it working with a Tester # I26.
view full answer... - Does EcoHitch X7413 2 Inch Receiver Hitch Fit 2021 Mazda CX-30
- According to EcoHitch, their X7413 hitch which we offer as part # EH55VR does indeed carry over to the 2021 Mazda CX-30.
If you'll be doing some towing with the hitch, you'll also need a ball mount like # D-28, a hitch pin like # PC3 and for a trailer ball, use # 19260 for a 1-7/8 inch ball or # 63845 for a 2 inch.
view full answer... - Is 2021 Mazda CX-30 Compatible With Hollywood Destination Bike Rack
- Yes, your 2021 Mazda CX-30 is compatible with the 2-bike version of the Hollywood Destination, the Hollywood Racks Destination Bike Rack for 2 Bikes # HLY94FR.
Then for a trailer hitch on your '21 CX-30 you would need the Curt Trailer Hitch Receiver # C49CR.
view full answer... - Trailer Hitch Receiver and 4-Way Vehicle Wiring Harness For a 2024 Mazda CX-30
- Yes, we have the Curt Trailer Hitch Receiver # C49CR which is custom fit for your 2024 Mazda CX-30. This will give you a 1-1/4" receiver for your ball mount and hitch mounted accessories.
I recommend installing the Curt T-Connector Vehicle Wiring Harness # C86CR when you install the receiver. This will give you a 4-way flat connector which is the most common connector used on small trailers. It will also allow you to use Auxiliary Lights # C53201 should your hitch mounted accessory impair...
view full answer... - Will the Inno Wedge 660 Fit a 2021 Mazda CX-30 With OEM Rack
- The Inno Wedge 660 Rooftop Cargo Box part # INBRM660BK will fit a 2021 Mazda CX-30. That said, it will require that the distance from the center of the front crossbar to the rear hatch line is at least 49" in order to open the hatch fully with the box installed. If this does not work for your rack setup and it's a feature that is important to you, simply provide me with your hatch clearance measurement and I will see if there is a better option.
view full answer... - Recommended Trailer Hitch Receiver For 2021 Mazda CX-30
- For your 2020-2021 Mazda CX-30 you will need the Curt Trailer Hitch # C49CR.
view full answer... - Will Thule Hullavator Pro Kayak Carrier Fit Aero Bars on 2020 Mazda CX-30.
- The Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading # TH898 will fit your existing aero bars on your 2020 Mazda CX-30. You do not need to purchase Thule square rails since this works with square, aero/elliptical/factory, and round bar styles. What you will need to do is make sure your roof rack has a capacity of at least 130 lbs to use the Hullavator. Your existing crossbars also need to stick out 4" - 8" beyond the feet.
I have attached a review video...
view full answer... - What Is The Best Hitch For Mazda CX-30 2021
- I recommend going with the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" # EH55VR. It has a 2 inch receiver that will be able to take any accessory and gives you the option to pull a trailer if the need ever comes up in the future. It also has a sleek look and almost appears to be a factory component. I like that because it doesn't stick out and isn't hard to miss.
My second choice would be the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C49CR....
view full answer... - Will Curt Wiring Harness Operate Correctly When Installed on a 2023 Mazda CX-30
- When we spoke with our contact at Curt they said the only time they've heard of the Curt T-Connector # C86CR having issues is when one of the pins was loose on one of the connectors. They replaced the kit for the 2023 Mazda CX-30 and everything started working correctly.
Once you purchase the wiring kit I recommend making sure all of the wires are properly secured in the connectors and then installing it. If you see that this issue happens to your setup then you can take advantage of the...
view full answer... - Hitch Hits Exhaust with EcoHitch Trailer Hitch on 2021 Mazda CX-30 Turbo
- I do show the EcoHitch Hidden Trailer Hitch Receiver part # EH55VR as a fit for a 2021 Mazda CX-30 Turbo. It is the only 2" option available for this vehicle. I was not able to find any reference to an exhaust issue but the exhaust and hitch making contact can be sort of common with some vehicles. The fix in most cases is easy, simply bend the metal exhaust hanger slightly in a direction opposite of the hitch and you should be good. This won't cause any issues since you're only bending...
view full answer... - Correct T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector for a 2022 Mazda CX-30
- The correct T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector for a 2022 Mazda CX-30 is part # TK67FR which offers a plug-in-play fit. In order to complete your towing setup you'll also need a trailer hitch and ball mount/hitch ball, I recommend the Curt Trailer Hitch Receiver part # C49CR which is bolt-on and the Curt Towing Starter Kit part # C45147 which is a complete kit that has everything else you need to hit the road with your trailer.
view full answer...
Go To Results