The Curt Trailer Hitch, item # C11308, will fit the 2007 Mazda 6 Sport Wagon models only.
For the 2007 Mazda 6 five door hatch back, and the 4 door sedan, you would need to use the Curt Trailer Hitch, item # C11329.
Some items you may need to complete your Class I towing setup are listed below.
Wiring, item # C59496, for the 2007 Mazda 6 Sport Wagon
Wiring, item # 118405, for the Mazda 6 4 Door Sedan and 5 Door Hatchback
Drawbar, item # 3593, for the 2007 Mazda 6 Sport Wagon
Drawbar,... view full answer...
Yes, the Curt # C11356 that is currently on your 2015 Mazda 6 will fit a 2017 Mazda 6.
I recommend replacing the hardware to install the hitch on the 2017. Use # RHK and enter the hitch information for the exact replacement.
If you're going to be towing a trailer and need the wiring harness use # C56280. It installs by plugging in to a connector behind paneling in the trunk. Then the hot lead will be connected to the positive battery post through the included fuse holder. view full answer...
Yes, we do have a class III hitch with a 2" receiver that will fit the wagon model of the 2017 Mazda 6 it is the EcoHitch Hidden Trailer Hitch Receiver item # 306-X7301. This hitch is custom fit and bolts directly to your Mazda 6 with included hardware.
If you need a wiring harness to control your trailer or accessories lighting functions I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118587. This custom-fit T-One connector plugs into your... view full answer...
Yes, the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" item # C11356 does fit the wagon model of the 2017 Mazda 6. This hitch is custom fit and bolts directly to your Mazda with included hardware. I have linked an installation video below. view full answer...
Yes, the SportRack semi-custom roof rack, # SR1010, is listed as a fit for your 2010 Mazda 6 sedan. It does not fit a 5-door model. I have included a link to a video review of this series of roof racks for you.
If you have a 5-door model then there is one roof rack option from Rhino-Rack using the following parts:
Euro Square Crossbars # RRVA126B-2
Feet # RRRLKVA
Custom DK Pads # DK289 view full answer...
The bars will work with your vehicle as part of an aftermarket roof rack consisting of
Rhino-Rack Vortex Aero Crossbars - Aluminum - Silver - 49" Long - Qty 2, part # RRVA126B-2,
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4, part # RRRLKVA, and the
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof, part # DK387.
This rack has a weight limit of 165lbs. It has crossbars with a t-channel for any channel mounted... view full answer...
The items you have listed for your 2017 Mazda 6 are compatible, the Curt # C11356 hitch, and the Swagman XTC-2 2-Bike Platform Rack # S64670.
The only other thing I recommend is protecting your investments with the Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks # S64029 which will lock the rack to your hitch.
If you wanted to secure your bikes as well, I recommend the Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks # S64031; this gives you the locking anti-rattle... view full answer...
The only option for a hitch on your 2018 Mazda 6 is a Class I hitch # C11356. This has a 1-1/4" receiver so a bike rack for a 2" hitch would not be an option. Also, a Class I hitch is going to be limited to 2 bikes, even if you use a 3-bike rack like the # S63365. Instead, you can use a trunk bike rack like the Yakima FullBack 3 Bike Rack # Y02633. This is confirmed to fit your Mazda 6 Sport and has a capacity of 35 lbs per bike or 90 lbs total when carrying 3 bikes. view full answer...
Yes, according to Thule the OutWay 3, # TH56BV, will fit your 2011 Mazda 6 sedan. Thule has several 3 bike trunk mount bike racks that will fit your car.
Gateway 3, # TH78VR
Passage 3, # TH910XT
Out of all of these bike racks, I think the Raceway 3 is the best choice. It is very light weight, under 19 pounds, and the retractable cables make it quick and easy to install. Out of all of the trunk mounted bike racks I have used, the OutWay has been the easiest to install. I have included... view full answer...
Great news, the Drawtite Hitch # 24832 will fit your 2011 Mazda 6S. I was able to find a video of the hitch on a split dual exhaust and have attached that for your convenience.
Because this hitch has a 1-1/4 inch by 1-1/4 inch receiver it will only have a 2,000lbs. towing rating. You will want to confirm with your owners manual how much your car is rated for because you will be limited to your lowest rated weight.
If you wanted to complete your towing setup you may also be interested... view full answer...
The Hollywood Racks Express 3 Bike Carrier, # HRE3, would not accommodate the spoiler on your 2008 Mazda 6 Grand Touring Hatchback but I do have a solution. Take a look at the Hollywood Racks Over-the-Top 3 Bike Rack, # HRF2-3, which is specifically designed for hatchbacks with spoilers. This carrier provides hatch anchors and the longer top straps that are need to secure the upper portion of the rack to your Mazda 6.
If you plan on carrying women's, children's or alternative framed bikes,... view full answer...
I do have a way to carry bikes on your 2005 Mazda 6 Hatchback, but it is not with a trunk mounted bike rack. A trunk bike rack will not be able to be used on a 2005 Mazda 6 Hatchback model because the hatchback will not be able to carry the weight of a trunk bike rack.
I recommend to use a hitch like the Curt Class I 1-1/4 Inch Hitch, part # C11308, along with the Thule Camber 2 Bike Carrier, part # TH9058. I am including links to the installation instructions of the hitch.
If you are... view full answer...
The Curt Trailer Hitch Receiver # C11356 is a confirmed fit for your 2019 Mazda 6.
This hitch is a Class I with a 1-1/4" receiver, 2,000 lb towing capacity and 200 lb tongue weight capacity. It offers a very simple installation by bolting onto the frame, as you can see by the linked install video I added for you. view full answer...
Yes. The Draw-Tite Trailer Hitch, # 24832, will fit your 2009 Mazda 6 with single exhaust. I have included a link to the instructions below.
I also recommend the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # HM11140245. This harness plugs in line with your Mazdas wiring and provide a 4 pole connector at the rear of the vehicle and requires a direct connection to the battery in order to protect your vehicles sensitive wiring. I have included a link to... view full answer...
If you have a 4-door 2009 Mazda 6 with no existing rails or crossbars, you can use SportRack Roof Rack, # SR1010, that you have referenced. I have also included a link to the roof rack main page for your vehicle for you. view full answer...
We can get your 2020 Mazda 6 set up for towing, and the hitch will indeed fit your Signature model, which I verified with the manufacturer for you. I'll go ahead and list out all of the parts you will need for this:
- Curt Trailer Hitch Receiver # C11356
- Curt T-Connector Vehicle Wiring Harness # C56300
- Curt Drawbar # C45016
- Pin and Clip # F-4
- 1-7/8" Hitch Ball # C40001 or 2" Hitch Ball # C40018
The hitch is a simple bolt-on installation with no drilling required so it is super... view full answer...
MagnaFlow Stainless Steel Cat-Back Exhaust System # MF15802 fits all 3.0L V6 gas engine versions of the 2003 through 2006 Mazda 6, including the Sport Wagon. I did double-check with my tech contact at MagnaFlow to make 100% sure for you.
This 100% stainless steel cat-back exhaust kit will give your 6 a deep and throaty sound on the throttle and all of the kit's components are shown in the linked image. view full answer...
For your high-performance vehicle my contact at Derale recommended replacing the leaking power steering cooler with their part # D13200. He indicated that cooler # D13213 is a bit small for your application. view full answer...
Yes, the Thule Passage 3 Bike Carrier # TH911XT that you referenced will work on your 2006 Mazda 6 as long as it is not the hatch model.
As long as you keep the contact points of the rack and your car paint clean and you do remove the rack when not in use you should not have a problem with the paint of your vehicle getting scratched.
If you will be carrying womens, childrens, or alternative frame bikes, I recommend using the bike adapter bar, # TH982XT, for greater ground clearance and... view full answer...
We currently have two no-drill trailer hitch receivers for your 2017 Mazda 6 Grand Touring which are the Draw-Tite Sportframe Trailer Hitch Receiver part # 24908 and the Curt Trailer Hitch Receiver part # C11356. They both have a Class I rating with a 1-1/4" receiver tube opening and will be limited to a max of two bikes. I recommend going with the Draw-Tite Sportframe trailer hitch receiver as this option will not require you to purchase an additional support strap part # 18050 like the... view full answer...
Go To Results