Is Thule Caprock Platform Roof Rack Compatible With Thule AeroBlade Edge Crossbars

Question

Question:

Is the Thule Caprock S compatible with Thule AeroBlade Edge crossbars?

asked by: Michael R

0

Expert Reply:

Yes, the Thule Caprock S # TH95YE is compatible with AeroBlade Edge bars like the # TH7601B. The bars measure 3-1/8" wide x 1-1/8" tall and the Caprock adapters work with bars between 3/4" and 1-7/8" tall and up to 3-1/4" wide. You will be limited by the 165 lb capacity of the bars or your roof capacity, whichever is lower.

expert reply by: Robin H

0

Answer 1

The Curt trailer wiring harness part #CU86FR that you referenced does come with a converter. It is mentioned in the description and pictured in product pictures as well. So the easiest to install brake controller that also works really well is the…

view full answer...

Answer 2

The two self tapping screws included with the Reese Multi-Plug Wiring Harness part #74682 will allow you to attach the trailer connector directly to your trailer hitch if needed but I don't really recommend this as you can weaked it and increase…

view full answer...

Answer 3

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, it is! Honda and other manufacture's like to leave the fuses out of new vehicles that do not come with a functional towing package to save on costs. You can verify if you're missing the fuses by checking your fuse box but I am pretty…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

To add a hitch to your 2024 Honda Pilot, I recommend the etrailer item #e27KR. This hitch is custom fit and bolts to your Honda with included hardware. I really like the etrailer hitch item #e27KR because it installs behind your rear bumper cover and…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...