If you are using the Blue Ox 7-Wire to 6-Wire, Coiled Electrical Cord part # BX88206 which it sounds like you are then you will need to attach the 12 volt power wire from the vehicle's battery to the terminal in the 1 o'clock position on the back of the vehicle side 6-way. In order to do this you will need the Roadmaster Battery Charge Line Kit for Towed Vehicles part # RM-156-25.
If the pin for the 12 volt circuit on the vehicle side 7-way which is in the 1 o'clock position is not active... view full answer...
That's awful nice of you to do for your son and I'm sure he'll be appreciative as you support his ski racing. We can help you and your son along the way because we have the exact parts you need to add a roof rack and rooftop box for his skis so he can easily transport them on his way to competitions or practice.
First, let's start with a roof rack, and there is one rack that will fit a 2008 Chevy Equinox with flush-mounted rails, and it is a square bar system from Inno. This rack is composed... view full answer...
Yes we do. We have some for all the common sizes. I will link a few for you.
Curt 3/8" Bolt Leader # C58390.
Curt Fish Wire Bolt Leader - 1/2" # C58400.
7/16" Bolt Leader # 80103-1.
Curt Fish Wire Bolt Leader - 5/8" # C58430. view full answer...
For a hitch to carry bikes on your 2022 Chevrolet Equinox I recommend the Curt Trailer Hitch Receiver # C77FR. This is a custom fit, Class III hitch with a 2" receiver. It has a maximum tongue weight of 675 lbs which will be more than enough to handle your bikes.
It features a gloss black powder coat finish and a concealed cross tube so only the receiver will be visible from the back. It uses a bolt-on installation and comes with a limited lifetime warranty.
I have attached an installation... view full answer...
We have three options for trailer wiring that I would recommend for your 2020 Chevy Equinox. If you have the tow package already you'd want the part # C94FR which easily installs to the vehicle's factory wiring (see install video). If you do not have the tow package you'd want then the # 118759 for if you have a Premier model or part # 118750 if you do not have a Premier model. view full answer...
As your 2016 Chevy Equinox can have a maximum of 350 pounds of tongue weight capacity, depending on how it came equipped, carrying a 280 dirt bike may be very doable. You will need to check your owner's manual for this capacity though, as again, it does depend on a few things.
You will also want to check the weight of the carrier. As an example, the Ultra-Fab Dirt Bike Carrier # UF48-979033 weighs right at 52 pounds, so the combined weight will be 332 pounds. If your Equinox is rate for... view full answer...
The Rhino Rack roof rack part numbers # RRVA118B-2, # RRRLKVA, and # DK226 that you referenced for your 2011 Chevy Equinox would not cause issues with rain or snow getting into the interior of your vehicle. The clamps of the rack attach to the door frame above where the weatherstripping meets the door frame so it does not affect the seals ability to prevent water from entering the vehicle.
I attached an install video for this rack on a similar Equinox for you to check out as well. view full answer...
For a 2019 Chevy Equinox Diesel the trailer hitch you need is the Draw-Tite Trailer Hitch # 76217, which is a Class III hitch with a 2" receiver, 4,500 lb towing capacity and 675 lb tongue weight capacity. The hitch you referenced, part # 76419, is not a fit for a Diesel because it would interfere with the urea tank. The instructions are linked for you to check out so you can see how Trailer Hitch # 76217 will install in your Diesel Equinox.
To add trailer wiring to your '19 Equinox,... view full answer...
I have a solution for you, but surprisingly we don't offer a coiled 7-way to 7-way extension for flat towing. What you would need is to start with the part # WG54006-046 and then wire it to the part # A7WCB so that you have a coiled 12 foot long 7-way to 7-way. This has all 7 wires that you needed. view full answer...
There are no replacement keys available for the Gorilla Guard coupler locks; the best we can offer is to remove it and replace the lock itself with one that has replacement keys available, the Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers # FA86-0015-316. view full answer...
The trailer wiring harness I recommend for a 2015 Chevrolet Equinox is the T-One Vehicle Wiring Harness, part # 118264 for models with the tow package or part # 118494 for models without the tow package. These are direct plug-in kits that provide a standard four way trailer connector which is the most common type and most widely used.
Please note, if you need a seven way then you'll have to use an adapter like the Adapter 4-Pole to 7-Pole and 4-Pole part # 37185. view full answer...
That is certainly understandable, and I did check with Kodiak for you and can confirm that the hub pilot bore is 4.88 inches for the following Kodiak disc brake kit for Rockwell 10k axles:
- Kodiak Disc Brake Kit - 11" Rotor - 8 on 6-1/2 - Dacromet - Leaf Spring - 10K Rockwell # K2HR958QD11
The hubs do have an 8 on 6-1/2" bolt pattern with 5/8" wheel bolts, which you'll also want to keep in mind to make sure your wheels will work with those specs. view full answer...
For your 2014 Chevrolet Equinox, I recommend the Thule SquareBars # TH712100 with the foot pack # TH710401. These crossbars attach to your vehicle's raised side rails with a rubber clamp. These square bars are an economic option from a well known and respected brand.
In order to carry two kayaks on your roof rack, I recommend Thule's The Stacker # TH830. This carrier provides a support for your kayaks to sit on their sides on top of your vehicle. The carrier comes with tie-down straps... view full answer...
The Demco SBS Stay-IN-Play DUO Supplemental Braking System - Proportional # SM99251 is a confirmed fit for your 2020 Chevy Equinox and I've attached an installation video of the braking system in a 2020 Chevy Equinox to help with your installation. I spoke with Demco about this same issue in a 2020 Buick Envision and they provided a picture of what they did to attach the actuator to the brake pedal (see attached picture). The technician recommended bending the bracket where it attaches... view full answer...
I found the installation video that we did on our 2019 Chevrolet Equinox but I have not been able to locate the video you mentioned with the 2018 Equinox. Our video we did was on a Equinox that came with the factory 7-way wiring and that may be why you do not see the same wiring.
I recommend installing a Roadmaster Stop Light Switch Kit # RM-751489 to give you your brake signal on your brake controller. This will ensure that you get enough power to the brake controller and do not risk... view full answer...
We do have a selection of roof racks that fit the raised rails on your 2017 Chevy Equinox. I recommend the Yakima JetStream because of the adjustability in the legs and the high quality of the crossbars. Here are the parts you'll need to complete this roof rack:
- 50 JetStream Crossbars # Y00425
- TimberLine Towers # Y33TR
- Lock Core Kit (optional) # Y07204
Attached is an installation video of this kit on a 2015 Equinox for you to check out. view full answer...
To convert the Curt 4-Way Harness # C56375 on your 2019 Chevy Equinox to a 7-Way connector you will just need the Universal Wiring Kit # ETBC7. This will plug right into the existing 4-Way and it includes all the extra wiring, circuit breakers, ring terminals, and connector bracket required for installation. This will give you a fully functional 7-Way connector that you can use with a brake controller to power the camper's brakes.
I have attached the written installation instructions... view full answer...
There is indeed a trailer hitch receiver that fits your 2024 Chevy Equinox, from Curt, and is the following part number:
- Curt Trailer Hitch Receiver # C77FR
I verified this fit directly with the manufacturer for you. view full answer...
The Roadmaster Brake-Lite Relay Kit for Towed Vehicles part # RM-88400 is not required for a 2017 Chevrolet Equinox so you will be good to go without it. That said, to answer your question, this is a universal component so specific installation instructions will not be provided for any one particular make and model. view full answer...
The Kuat NV 2.0 Bike Rack for 2 Bikes # NV22G is designed to fit 2" hitches so you would be good to go with the Curt Trailer Hitch Receiver # C77FR on your 2023 Chevy Equinox LT. I've attached a video below where Aiden will show you the NV on the back of a 2023 Chevy Equinox so you can get a better idea on clearances with your specific vehicle, as well as John's installation video of the trailer hitch. The installation is really easy so you could do this yourself if you have a torque wrench... view full answer...
Go To Results