Yes. You can get a replacement installation hardware kit for your etrailer # e98865 with part # RHK. You'll go to the part page for the # RHK and put the part number of the hitch- in this case e98865- in the field marked "Hitch Item Number". This will get you the appropriate replacement hardware kit for your hitch to reinstall it on another Chevy Equinox. view full answer...
To activate the electric brakes you will need the use an adapter like the one shown in the Universal Installation Kit # ETBC7. The existing 4 way harness only carries 4 signals: the right turn signal, the left turn signal, the tail light signal, and a ground. To use electric brakes, you need a 7 way adapter that provides power to the brake controller signal (blue wire).
This kit includes everything you need to convert your 4 way to a 7 way ion your Equinox.
If you need a 4 way trailer... view full answer...
If you only have the Roadmaster BrakeMaster Air Cylinder part # RM-9100-50 (With Brake Pedal Clamp) then you'd need the Replacement Cord part # RM-921004, Second Vehicle Kit with Breakaway part # RM-98160, and Second Vehicle Kit for Air Brakes part # RM-98200. This would end up being around the same cost as the Roadmaster BrakeMaster System part # RM-9160 so that's up to you.
Please note, in order to use the Roadmaster BrakeMaster System on a 2019 Chevrolet Equinox you'll need both the... view full answer...
You can use the Roadmaster Stowmaster 5000 tow bar, and by drawbar I assume you mean base plates for your 2020 Chevy Equinox. The Stowmaster 5000 is compatible, but you do need specific base plates for your Equinox, which are the Roadmaster Crossbar-Style Base Plate Kit # RM-523193-4.
Along with the base plates and your Stowmaster 5000 tow bar, there are a few other parts you will need in order to flat tow your 2020 Equinox:
- Safety Chains: Roadmaster 80" Coiled Safety Cables # RM-653
-... view full answer...
You'll need the # D13035 adapter. You can see the adapter being used to install a transmission cooler similar to the
# FLX400123 on a 2017 Equinox like yours by using the provided link. view full answer...
If you have the 2019 Chevrolet Equinox Premier you can use Roadmaster diode wiring kit # RM-15267 along with 6-pole plug # RM-910030-8 that you will install in place of the included 7-way. An article on wiring is linked to assist you with this process.
If you do not have the Premier you'll instead need one of the kits shown on the linked page, such as magnetic light kit # TL21RK or bulb and socket kit # RM-152-LED. view full answer...
It will depend on what state you are located in. In most states, trailer brakes aren't required unless the trailer weighs 3500 lbs or more. This being said, if your pop-up is already equipped with them, it's not a bad idea to use them.
If your popup is equipped with brakes, and you'd like to use them, the easiest way to make that happen if you have a smart phone would be by using the Curt Echo # C51180. If your Equinox has a 7-way trailer connector, the controller install would be plug... view full answer...
Thanks for reaching out, I'd be more than happy to help you get setup for flat towing your 2015 Chevy Equinox!
For a complete flat towing setup you will need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. Here are the parts I recommend:
Blue Ox Base Plate Kit - # BX1689
etrailer SD Non-Binding Tow Bar - # e47ZR (comes with safety cables)
Wiring Kit - # RM-15267
Charge Line Kit - # RM-156-25
Fuse Bypass... view full answer...
We have the perfect pair of towing mirrors that are confirmed for your 2022 Chevrolet Equinox!
The K-Source Universal Towing Mirrors # KS3891-2 will mount on your factory side mirrors and will extend your lines of sight. The mirrors have a ratcheting system that will securely tighten the heavy-duty rubber straps over your mirrors. The mirrors have a quick-release button on the ratchets for an easy snap adjustment and fast removal.
The mirrors have a black plastic housing that provides... view full answer...
You will need a few things for a complete set up to tow a trailer on your 2014 Chevrolet Equinox.
First, let's start with the trailer hitch:
For your 2014 Chevrolet Equinox I recommend the Class III, 2 inch etrailer # e98865. Be sure to check your owner's manual to verify the towing capacity of your vehicle before you tow. It has a 2 inch hitch receiver opening (as opposed to 1-1/4 inch) which offers many more hitch mounted accessories to choose from when you're not towing your trailer.... view full answer...
When it comes to flat towing your 2019 Equinox there are a few items that will be similar to the items you saw already. The main difference would be the RoadMaster Baseplate # RM-523193-5. This baseplate is a direct fit for you vehicle. It is the direct connect style. From the baseplate any RoadMaster tow bar would work for you. I recommend The Falcon 2 # RM-520. The Falcon 2 is rated for 6000 pounds and will connect directly to your baseplate.
For the wiring of the vehicle I recommend... view full answer...
I'd be happy to help you put together the rest of the parts needed for your 2015 Chevy Equinox, and you are most of the way there with what you have right now:
- Blue Ox Base Plate Kit # BX1689
- Blue Ox Alpha 2 Tow Bar # BX7380
- Demco SBS Stay-IN-Play DUO Supplemental Braking System # SM99251
Since this tow bar comes with safety chains, the only other parts you'll need are a wiring kit, fuse bypass, and likely a high-low adapter.
- Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil... view full answer...
Yes, our Curt hitch # C77FR is Curt's part # 13439. This hitch fits the gas models of the 2018 to 2020 Chevy Equinox and GMC Terrain. I've linked an install video as well. view full answer...
Roadmaster hasn't been able to get their hands on a 2022 Chevy Equinox to determine the base plate fits, so they cannot say whether or not the base plates for the 2021 model will carry over. However, Blue Ox lists the # BX1730 base plate as a fit, so that's what I'd recommend. Roadmaster offers the # RM-525 Falcon 2 tow bar that's compatible right out of the box with Blue Ox base plates, so it'll work great for you.
The Roadmaster Invisibrake, part # RM-8700 would work well for you. You'll... view full answer...
Yes, the same parts will apply to a FWD 2017 Chevy Equinox as well as a 2017 Equinox with AWD save maybe the fuse bypass that is used. The parts listed are as follows:
Base Plate Kit - # BX1689
Tow Bar/Safety Cables - # BX7380
Tow Bar Wiring - # RM-15267
Fuse Bypass - # RM-76517 (4-Cylinder) # RM76511 (V6)
Charge Line Kit - # RM-156-25
Braking System - # SM99251
Most flat towing setups require a high-low adapter for the tow bar to remain level while towing. I have linked our selection... view full answer...
I took a look at an online version of an owner's manual for a 2016 Chevy Equinox and it states that both front-wheel-drive and all-wheel-drive models can be flat towed with all four wheels on the ground. You will want to take a look at your owner's manual to verify this as well as follow the necessary procedure to flat tow.
There are a number of parts needed in order to flat tow your 2016 Chevy Equinox.
- Base Plate Kit: Demco Classic Base Plate Kit # DM9518315
- Tow Bar: Demco Excali-Bar... view full answer...
Thank you for the photo; I cannot confirm for you what rail is already on your 2019 R-Pod and its compatibility with the Solera 8' Slider (Slide-Topper) in Black w/ Black Hardware # LCV000168106, though chances are it won't be an issue. At worst you would need to remove your existing rail and install the awning rail that comes with the Solera # LCV000168106 so you will be covered either way.
Just keep in mind that this awning will fit your R-Pod so long as it has a box width range of 86"... view full answer...
The base plate kit that you want to install on your 2013 Chevrolet Equinox to use with the Nighthawk All Terrain # RM-676 is Roadmaster EZ5 # RM-523160-5. These will connect directly to each other without an adapter. This base plate kit will not fit your Equinox if it has a brush guard, but it does have a limited amount of trimming as you can see from figure T in the attached instructions.
To finish the wiring on your Equinox you need the Hy-Power Diode Wiring Kit # RM-152. Since a fuse... view full answer...
Equinox models equipped with the tow package will have blunt-ended tow package wiring located behind the side panel of the center console on the driver's side next to the gas pedal instead of a connector. You'll need the # C51515 universal harness that will plug into the Curt # C27JR Echo brake controller and wire directly to the tow package wiring.
The tow package wiring is a bundle of 4 blunt ended wires that are blue, black, white/blue striped and red/green stripe.
The pigtail wires... view full answer...
According to the owner's manual, 1.5L gas and 1.6L Diesel engine and 1.6L Diesel AWD models can be successfully flat towed.
I'd recommend beginning with a Blue Ox base plate, part # BX1730 which is compatible with your tow bar if the # BX88297 adapter is used. You'll also want safety cables like # RM-643 if you don't already have them.
To join the motorhome's taillight wiring to that of the Equinox, I'd recommend the Roadamaster Diode kit, part # RM-152-98146-7. For a supplemental braking... view full answer...
Go To Results