We actually have made specifically for situations just like this. You're just going to need the Replacement Hardware Kit for Trailer Hitches # RHK.
In the "Hitch Item Number" box, you will enter your 76419 part number and we will send you a complete replacement hardware kit. view full answer...
Your memory does serve you right and both arms on your Roadmaster Falcon 2 # RM-520 are designed to "lock up" as this is not a non-binding tow bar; whether or not they've been able to get the arms to lock without performing the two sharp turns I don't know to be true. With that said, since you're going through the setup procedure that would normally cause the arms to lock, it would appear your bar might be damaged.
I recommend using the Complete Repair Kit for Roadmaster Falcon 2 and... view full answer...
Yes, we do offer replacement mounting hardware for trailer hitches, using the Replacement Hardware Kit for Trailer Hitches part # RHK. Just enter the hitch manufacturer and model number into boxes and you'll be sure to get the exact same hardware the hitch would have come with originally. view full answer...
According to my research your Master Tow 77T tow dolly has 205/75-14 size tires with a 5-bolt pattern so I recommend this combo from Kenda:
- Kenda Karrier ST205/75R14 Radial Trailer Tire with 14" Black Mod Wheel # AM32131
This kit has a load range of C (1,925 lbs at 60 psi) and a max speed rating of 81 mph so it will be a great replacement for your tow dolly! view full answer...
There are a couple of ways to get the correct hardware to install a trailer hitch on your 2012 Chevy Equinox. First, you could order replacement hardware kit # RHK. Enter the hitch part number and choose the manufacturer to get the proper kit for that hitch.
The other way is to try to find the individual parts that match the OEM bolts in size, material, and grade locally. But not all of the hitch hardware is common enough to be obtained locally. I can tell you what hardware is used if... view full answer...
The etrailer Trailer Hitch Receiver # e98865 is a fit for your 2014 Chevy Equinox. I recommend using hardware kit # RHK to get the hardware you need for that installation. You will simply go to that product page and enter e98865 in the hitch number box and add it to the cart. We will ship you the exact parts you need for that hitch. view full answer...
Your BT-150 hub will use the Bearing Kit # BK1-150. Since you have a snowmobile trailer which likely comes in contact with a lot of road salt and chemicals you might consider upgrading to a Galvanized Hub # CE13315. This hub will come pre-greased and ready to slide onto your spindle. view full answer...
We do have a large selection of coupler repair kits available that are designed for specific brand trailer couplers. I recommend looking on the coupler to see if you can find a brand and model number printed somewhere. I have attached a link that will take you to our available selection of repair kits. You can choose from the different available brands by clicking them on the left side of the page.
If you find that you need to replace the coupler on your trailer completely, and cannot... view full answer...
The hitch installation hardware you need for your 2018 Chevrolet Equinox with Curt 13307 hitch is the Replacement Hardware Kit for Trailer Hitches # RHK. There is a box for "Hitch Item Number" which is where you will put the 13307 and a drop down box where you will select "Curt". view full answer...
Unfortunately, Lippert does not offer a clear or blue lens or a replacement lamp with a clear lens.
However, I do have a solution that would work for you. I'd recommend using the Optronics # UCL60CB. It's about the same diameter, and is an LED lamp so it would be brighter, draw less power and last much longer. It's also comparably priced. It's also submersible, so water getting on the lamp won't be a problem. The mounting holes are at 2-1/4 inches on center, as opposed to the 1-1/2 inch... view full answer...
For your Fulton F2 Swing-Up Trailer Jack, Dual 7" Wheels, Sidewind, Bolt-On - 1,600 lbs # F1413020134 part number 9 you referenced is not a replacement option. The outer tube components are not replaceable according to my contact at Fulton. That part only comes with the complete assembly so you will need a new jack if that is a damaged part.
We have the following replacement parts:
Fulton Wheel Wedge Kit for F2 Swing-Up Jacks with Dual Wheels # F500132
Replacement Pull Pin Kit for... view full answer...
If you are looking for replacement hardware for the Draw-Tite Max-Frame Trailer Hitch Receiver part # 76217 which is a fit for a 2020 Chevrolet Equinox then this can be obtained with the Replacement Hardware Kit for Trailer Hitches part # RHK which comes with everything that the hitch would have when new. view full answer...
We do offer replacement hitch installation hardware kits for all hitches we sell. The kit is part # RHK and you can order the hardware by selecting that item, and entering the hitch item number # 13591 in the field provided and selecting the maker from the drop-down menu tool. view full answer...
If you want to stay with a bias tire we have the Kenda ST205/75D14 # AM1ST52 in a load range C. You will need to check your specific tow dolly to ensure this is the correct load rating for the trailer. I do see most tow dolly's will use a load range C tire.
Since radial tires perform better on road than bias tires you will benefit from making the change. We have the Karrier ST205/75R14 in a load range C # AM10234 or D # AM10235. view full answer...
RVS offers a 49 foot replacement 5 pin female cable with the threaded retaining rings on both ends as part
# RVS-885. This is longer than what you actually need, but is the only replacement cable of this type offered.
If you click the provided link, you can see a product description video featuring this replacement cable. view full answer...
Yes, we have the Replacement Hardware Kit # RHK which will give you new hardware for installing a trailer hitch receiver. Be sure to input the manufacturers hitch number in the box so you get the correct hardware for that particular receiver. view full answer...
It sounds like you need an adapter like the Mighty Cord 7-Way RV Style to 5-Way Flat Trailer Connector Adapter # A10-7275VP. This will plug into the 7-way on your 2011 Equinox and allow you to connect the 5-way on your trailer. view full answer...
We do have replacement arms available for Roadmaster base plate kits like # RM-523193-5 which fits the 2019 Chevy Equinox. The part is # RM-ARMS.
When the original base plate brackets and arms are manufactured, they are made as one single part. So to be sure that the replacement arms fit perfectly, Roadmaster just needs a bit more information regarding your original base plate brackets. Prior to ordering, you will just click on the Installation Details at the bottom of the product page... view full answer...
The correct hardware will depend specifically on the hitch you have for your 2013 Chevy Equinox. For any hitch we do have replacement hardware, the Replacement Hardware Kit for Trailer Hitches # RHK.
All you need to do is go to this product page, enter the model number of your hitch in the box that says "Hitch Item Number" and then select the correct manufacturer from the drop-down box.
Simply enter the hitch number in the "Hitch Item Number" box and select the manufacturer from the drop-down... view full answer...
We have a way to install a brake controller in your 2012 Chevy Equinox, but it would not be pre-wired for a brake controller like some vehicles are.
You will need to start with a 4-way (if you do not have one). For that you would want the # 56094.
From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install... view full answer...
Go To Results