Yes we have everything you need to flat tow your 2021 Ford Escape Hybrid. To begin with you will need a base plate kit, I recommend the Roadmaster Direct-Connect Base Plate Kit with Removable Arms, # RM39FR. This will mate to the Roadmaster Falcon All Terrain, Non-Binding Tow Bar, # RM-522; this is a non-binding type allowing you to unhook your tow vehicle easily and quickly even if you are parked on un-even ground.
For safety cables and wiring I suggest staying with the Roadmaster brand... view full answer...
We do offer a Replacement Hardware Kit # RHK. Its a great option for Curt, Da'Lan, Draw-Tite, etrailer, Hidden Hitch or Reese trailer hitch receivers. Please specify your manufacturer and hitch number when placing the order. view full answer...
The issue you are having with your trailer lights sounds like the converter box is bad and will then need to be replaced as these cannot be repaired. The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118551 is what I recommend using as it is the most reliable option we have for a 2012 Ford Escape.
If you wanted to be sure the converter box was the issue then all you need to do is take a circuit tester and test the wires leading into the box and then leaving the... view full answer...
The first place to look when you're wanting to tow your vehicle is always the owner's manual. It takes all the guess work out and will give you step by step instructions to get your vehicle ready to tow if applicable. As for a Jeep Cherokee you will need the "ActiveDrive II" transfer case to be able to flat tow.
If your Jeep Cherokee can be flat towed you'll need a tow bar, tow bar wiring kit, base plate, braking system, and safety cables. If you can reply back with the year of your Jeep... view full answer...
It sounds like you have done all the testing that you can do. You have proven that you have power going to the converter from the battery and power coming from the taillights into the converter. With having power going into all the correct circuits and only the running lights coming out on the 4-way it has to be a bad converter. It is an electrical component and may have become overheated or damaged internally for a number of reasons.
I recommend replacing the entire T-One Vehicle Wiring... view full answer...
We do offer an all inclusive kit for wiring in a trailer brake controller like the popular Prodigy P2 # 90885. Kit # ETBC7 contains a 7-way vehicle socket, and all of the wiring, connectors and other parts needed to install the P2 in your 2008 Ford Escape that does not have a factory trailer connector.
All you need to add is a 4-pole harness, which is the starting point for the install. If you have the factory tow package use part # 118251 along with three of relay part # TR38665. If... view full answer...
For a trailer wiring harness confirmed as a fit for your 2008 Ford Escape we have the Tow Ready part # 118551. If the taillights on your vehicle aren't currently working I cannot guarantee this kit will work since they will need to be functional.
Have you tried checking the bulbs in the housings of your vehicle? You can also try checking the fuses for the lights on your vehicle as well. view full answer...
Yes, we do have a Thule Roof Rack that can lock for your 2022 Ford Escape with Flush Rails. The roof rack consists of 3 different parts, they are:
Thule WingBar Evo Crossbars - Aluminum - Black - 53" Long - Qty 2 # TH711420
Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails - Qty 4 # TH710601
Fit Kit for Thule Evo Clamp Roof Rack Feet - 6049 # TH96RV
The locking capability will be added with the Thule One-Key System Lock Cylinders - Qty 4 # TH450400. view full answer...
For your 2022 Ford Escape Hybrid we have the etrailer hitch part # e89YR as a confirmed fit which is a really great option. It's mostly hidden and has great towing capacities as well. Only the hitch opening hangs below the rear bumper which allows it to be mostly hidden and this also helps with ground clearance.
If you need trailer wiring too the Tekonsha kit part # TE54FR is an easy fit and has a very reliable converter box. view full answer...
The Draw-Tite hitch # 75751 that you referenced will fit underneath the factory hitch of your 2009 Ford Escape. To see how it attaches to the frame of your vehicle check out the picture and installation instructions I attached for you.
This hitch will work with your factory spare as well. view full answer...
The trailer wiring harness I recommend for a 2012 Ford Escape without tow package is the T-One Vehicle Wiring Harness with 4-Pole Flat part # 118551 which plugs in behind the tail lights so you won't have to do any splicing. It will also work on models with the tow package if you aren't sure. Unfortunately, you'd need to reach out to the dealer to ask if you have the tow package if you don't know. The plug may be present for the connector but that does not mean the circuits for the tow... view full answer...
If your 2012 Ford Escape had the factory tow package the correct trailer wiring harness would be the # 118251. The connection point is behind the rear bumper on the driver's side of the vehicle. I attached a picture I took from the install instructions for this kit for you to check out as well. view full answer...
It sounds like you're looking for base plates for your 2022 Ford Escape Hybrid. If you have a Roadmaster tow bar we have the following:
-Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM39FR
-Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # RM59FR
Then for Blue Ox:
-Blue Ox Base Plate Kit - Removable Arms # BLU55XR
If you have a 2023 Ford Escape Hybrid there are still no base plates available as of February 2023. Both Roadmaster and Blue Ox are looking for a... view full answer...
The Curt 2 Bike Platform Rack, # C18085, and other similar style racks that clamp to the bike we prefer to provide a cautionary warning to when it comes to carbon frame or custom painted bikes. There are many folks that use these racks regularly with carbon fiber framed bikes without issue, there are others that state it is not best. We prefer to error on side of caution. Yes, this will work for a bike with fenders.
I prefer the Transfer V2 # KU84FR for carbon fiber bike frames, it holds... view full answer...
The now obsolete Reese hitch 37042 that you referenced was confirmed to fit a lot of vehicle, but the newest Ford Escape it was confirmed to fit was the 2004 model so it would not work for you.
Instead, you would want the etrailer part # e56AR. This is a Class III hitch with plenty of capacity that would work well for you. Check out the install video I attached.
For trailer wiring you would need the part # 118426.
If you plan on doing some towing you might be interested in etrailer ball... view full answer...
According to Roadmaster, only one fuse needs to be pulled in order to flat tow your Escape. According to Roadmaster, the fuse is located in the power distribution box under the hood. You would remove the 20 AMP Main Ignition Fuse in position # 28.
Roadmaster highly recommends you confirm the fuse location with your Ford dealer.
For more info about flat towing, you can check out the Flat Towing articles I have linked to. view full answer...
Since your trailer does not have trailer brakes you will just need the Adapter 4-Pole to 7-Pole and 4-Pole # 37185 which will plug into the 4-way connector already installed on your 2020 Ford Escape, and will give you a 7-way and 4-way connector for towing your trailer.
If your trailer hitch receiver does not have the mounting tab for the connector to bolt to, you will also need the no drill mounting bracket # 18140.
I included videos for both of the products mentioned for you to take... view full answer...
I would be glad to recommend everything you will need to flat tow your 2021 Ford Escape Hybrid.
Starting with the base plate kit I recommend the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM39FR which will pair up perfectly with the Roadmaster Falcon All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,000 lbs # RM-522 . The # RM-522 is one of our most popular tow bars due to the non-binding arms that allow you to unhook your tow vehicle easily and quickly... view full answer...
I'm happy to hear that you are pleased with your Roadmaster Crossbar-Style Base Plate Kit # 4414-1 on your 2010 Ford Escape!
The driver and passenger arms that you mentioned are what you mount the crossbar of the tow bar like the Roadmaster Sterling All Terrain Tow Bar # RM-576 to as seen at the 3:25 minute mark in the included video.
This allows you to mount the crossbar to your vehicle, but still be able to remove it when you are not flat towing by simply pulling the pins on the two... view full answer...
The Draw-Tite Max-E-Loader Trailer Hitch Receiver part # 75758 is the easiest to install trailer hitch for a 2019 Ford Escape and has a class III rating with 2" opening. It does not require that you lower the exhaust or remove any panels. There is no trimming or drilling required either; simply feed the hardware into the frame, lift the hitch in position, and then secure but that's it. It should take you no more than 1:00 and you only need common hands tools for the job. If you need help,... view full answer...
Go To Results