I have attached for you below the full list of replacement parts we offer for the Reese 5th Wheel Trailer Hitch part # RP30047. That said, not all components are replaceable so if it's not on this list odds are it is not offered separately.
Replacement Fifth Wheel Bumper part # 58089
Replacement Handle Kit part # 58055
Replacement Crossmember Head Support part # RP58147
Replacement Head part # RP58146
Replacement Base Legs part # RP30727
Replacement Pivot Pin part # 58484 view full answer...
The Reese Hitch 44680 is the same as the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75751 which is a fit for a 2012 Ford Escape. We can offer you replacement hardware using the Replacement Hardware Kit part # RHK which you will need to enter info from the Draw-Tite hitch for to receive the correct parts. view full answer...
We have exactly what you are needing on the linked page.
If you are needing a hub and drum assembly then we have part # 8-257-5UC3-EZ from Dexter which fits the description you mentioned and is compatible with a 7" brake assembly. It comes with the EZ Lube grease cap, but that can be used for a standard spindle as well.
For just a standard idler hub we have part # 8-259-5UC1-EZ from Dexter which, again, fits the description you gave and comes with the EZ Lube grease cap.
Both hub assemblies... view full answer...
We do carry replacement hardware for the Draw-Tite Trailer Hitch Receiver # 75758, though just two bolts by themselves are not available, as you'll need the entire hardware kit with the Replacement Hardware Kit for Trailer Hitches # RHK.
To order it, just click # RHK, enter "75758" in the "Hitch Item Number" box, select "Draw-Tite" from the drop-down menu, and hit “Add to Cart” to place your order. This will get you all of the hardware from the hitch. view full answer...
The Hidden Hitch part # 87626 has replaced the 87585 that you currently have. I checked to confirm this with Hidden Hitch.
In order to get the correct install hardware you would need part # RHK. On the product page you would need to enter the part number of 87585 and we will ship you out the correct hardware. Even though we no longer carry the hitch you have we still have access to the hardware list for it so we know what you would need. view full answer...
We can help you with replacement hitch installation hardware for your Draw-Tite # 75758 Class III hitch. All you need to do is enter the part # RHK into our search box and then enter the part number 75758 and select Draw-Tite from the drop-down menu.
It is important to use new hardware when you re-install a hitch on a different vehicle as this type of hardware is intended for a single use.
For reference I have linked two helpful articles and a video to assist you with your installation.
Note... view full answer...
Yes, there is a replacement bolt kit for the Curt Front Mount Trailer Hitch Receiver part # 31650 which is a fit for your 2008 Ford Escape. In order to obtain this you can use the Replacement Hardware Kit for Trailer Hitches part # RHK which will come with the exact same hardware that would have been included when the hitch was new. Once you arrive at the product page for the Replacement Hardware Kit for Trailer Hitches you will need to enter "31650" into the item number box and then select... view full answer...
It sounds like you have a Swagman Original bike rack. We have the replacement cradle padding # P0023 which fits 1999 models and newer. This is the only gray cradle padding available that fits bike racks like what you have described so even if it is not exactly the same you may be able to still use it by modifying it somehow so you won't have to purchase a new rack just yet! view full answer...
I'd be happy to help with that. I'd recommend the # A10-7072VP along with the # PK12711U mounting bracket.
You'd simply unplug the existing 7-way from the harness that plugs into it, and replace with the # A10-7072VP. view full answer...
The hardware pictured on the Replacement Hardware Kit for Trailer Hitches # RHK is for a specific hitch. When you go to that product page, you need to type in your hitch number and select the manufacturer from the drop down menu. We will make the kit for your specific hitch and send it to you, so you will have all the hardware for your unique trailer hitch receiver. view full answer...
If you can determine what hitch model and brand you have we can set you up with everything you would need.
With that info you could go to the product page for part # RHK, select your hitch manufacturer, and then enter the part number for the hitch and we will send you out the correct hardware. view full answer...
It is always recommended to replace all of the mounting hardware when re-installing a trailer hitch.
The Draw-Tite # 75758 is confirmed as a fit for the 2017 Escape.
To order new hardware for the hitch you just need to go to # RHK. Then enter the hitch number in the appropriate box and choose Draw-Tite from the drop down menu. Add that to your cart and the kit will be assembled for you. view full answer...
The brackets you will need for your CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Gray Plastic - 12" Wheels - Qty 2 # CE19502-2 will be the CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3" Wide - Qty 1 # CE26212G. You will need U-Bolts, like the # CE15284GA, to attach the brackets to the frame, but you should be able to reuse the rest of the hardware you currently have. view full answer...
We can provide emplacement hardware to install a Curt # 13650 Class III hitch on your 2008 Escape. You would use part # RHK. On the product pate, type the hitch part number into the provided field, choose Curt from the drop-down menu and choose a quantity of 1.
I've linked you to an install video showing the hitch being installed on a 2009 Escape. The procedure on your 2008 would be identical. view full answer...
If you have the Ford Escape equipped with a tow package you will want the Plug-N-Tow Wiring harness, part # C55255.
For the Escape without the tow package, the T-1 Vehicle Wiring Harness, part # 118343 would be the correct fit.
The T-1 Harness would install inline using the existing connections between the factory wiring harness and the taillight assemblies. We have a video of this part being installed on a 2002 Escape that I have linked below. view full answer...
We don't have replacement lock cylinders with the number 2818 but you can replace your cylinder with any of the Thule cylinders on our site. You will need the cylinder # THLOCKN168, the matching key # THKEYN168 (I recommend getting at least 2 of these), and the Universal Change Key # 853-1251 to install the cylinder.
If your box has 2 cylinders then you can either get 2 of the lock cylinders or simply order part # TH450200 which comes with 2 cylinders, 2 keys, and the change key. view full answer...
Yes, you can use u-bolt # TH02943 with your Sears Sport 20 SV cargo box. Or, if you wanted to, you can use replacement hardware kit # TH05603 to replace all of the hardware or to have some extra parts on hand should you need them. view full answer...
My research indicates that grease seal part 125255UC has an outer diameter of 1.980-inches and this correlates with the hubs that use bearing # L44649. The seal part most often used with inner/outer bearing L44649 is seal part # 10-9 which has an inner diameter of 1.50-inches and an outer diameter of 1.987-inches so bearing kit # BK1-150 that you referenced should do it.
You can confirm the seal size by measuring a spindle at the point where the seal rides (point B in the linked image)... view full answer...
Go To Results