Is There a Thule Bike Rack That Locks for My 2022 Ford Escape With Flush Rails

Question

Question:

Do you carry a Thule roof rack that locks for a 2020 Ford Escape that has flush rails?

asked by: Brian J

0

Expert Reply:

Yes, we do have a Thule Roof Rack that can lock for your 2022 Ford Escape with Flush Rails. The roof rack consists of 3 different parts, they are:

Thule WingBar Evo Crossbars - Aluminum - Black - 53" Long - Qty 2 # TH711420
Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails - Qty 4 # TH710601
Fit Kit for Thule Evo Clamp Roof Rack Feet - 6049 # TH96RV

The locking capability will be added with the Thule One-Key System Lock Cylinders - Qty 4 # TH450400.

expert reply by: Thomas M

0

Answer 1

We sure do! I really like the US made Thule WingBar Evo roof rack, which would consist of the following parts: • Thule WingBar Evo 53 inch crossbars in black as part #TH711420 or silver as part #TH711400 • Thule Evo Clamp roof rack feet, part…

view full answer...

Answer 2

For a roof rack to carry all the things on your 2023 Ford Escape I recommend the Rhino-Rack Vortex Aero roof rack system. For the complete roof rack you will need the following: -Rhino-Rack Vortex Aero Crossbars #RRVA137B-2 -Rhino-Rack 2500 Series…

view full answer...

Answer 3

The roof rack that I recommend for your 2022 Ford Escape with Factory rails is the 2022 Ford Escape Roof Rack by Yakima which consists of: - Yakima JetStream Crossbars #Y00425 - SightLine Towers for Yakima Crossbars #Y64AR - SightClip Fit Kit for…

view full answer...

Answer 4

The Thule WingBar Evo Crossbar System for a 2022 Ford Escape consists of part #TH711520, part #TH710501, and part #TH36RV. Therefore, you'll need a new fit kit and crossbars because the ones you have now are too short for the new vehicle you need…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 8

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 9

Slipper Springs like #e33SR do not use a bolt and bushing for the open eye end of the spring. It connects directly to the hanger using a slipper spring hanger kit.

view full answer...

Answer 10

Your 2008 Chevy HHR should have a set of rails on the roof that run from front to back. Which means we have the Rhino Rack part numbers #RRVA106B-2 and #RRSX100 as a confirmed fit, but the kit you mentioned is not a fit.

view full answer...

Answer 11

Since your 2023 Subaru Crosstrek does not have raised rails you are going to need a whole new roof rack since the Thule Rapid 450R Feet #753-3399-02 are only going to fit vehicles with raised rails. I recommend sticking with the Thule roof rack…

view full answer...