To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
15-1/4" Wide x 10" tall x 3/4" deep, reliable, all-aluminum tube-and-fin cooler extends the life and improves overall functioning of your Ford Bronco II's transmission.
Features:
Specs:
Note: The Derale Insta-dapt radiator adapter fits most vehicles with 5/16" transmission lines, but not all. In some cases, additional fittings or alteration of the OEM lines or hoses may be required for installation.
Perhaps the simplest type of heat exchanger, the tube-fin effectively cools a variety of automotive systems. The concept is simple: Fluid cools as it travels through the core by transferring heat out to the fins. The fins then provide the surface area necessary for sufficient heat exchange to take place, allowing the heat pulled from the fluid to dissipate into the surrounding air. Quick, easy and effective.
Replaces HH41014
Average Customer Rating: 4.6 out of 5 stars (128 Customer Reviews)
15-1/4" Wide x 10" tall x 3/4" deep, reliable, all-aluminum tube-and-fin cooler extends the life and improves overall functioning of your vehicle's transmission.I put the transmission cooler on a 2006 ram 2500 it keeps it 30° cooler than the OEM transmission cooler
Works solidly, much better than the optional stock tranny cooler. It doesn't get temps as low as another one I've had, but it doesn't leak like that one either! Always keeps temps within acceptable range, though at the higher end of acceptable when pulling 7-8k in 110*F outside temps and hills. Be prepared to fabricate a mount for it, not a one size fits all kit!
I was able to mount it but never able to actually install it and hook it up completely.
i put this unit in my 2008 NIssan Titan pickup. we are going to take a 9000 mile trip this summer pulling a 27 ft HI Lo camper. The instructions were very generic. specific unit instructions would be very helpful. the grill was difficult to get out until i found a Youtube video for that. the hose provided was to short, so I made a run to the parts store. the unit appears to be well made.
Jim K.
4/19/2018
we used the cooler in my 08 Titan. we pulled a 27 ft travel trailer thru 28 states and never had any issues
This is a customer service review not a product review.
Leeza J. was very helpful in helping me get everything needed for adding a secondary transmission cooler to my Chevy truck. I ordered 3 different items and the one item was not in stock and I was promised that I would be notified when it arrived. I was notified that the item was in stock 2 days later and I received the package a few days after that. Very good service that impressed me.
I used this cooler on a 2004 Chevy Silverado. The accessories were not needed because I needed longer hoses and fabricated my own mounting. I think the hose clamps and the hoses could be better quality. The cooler does work very well.
Super easy install. With the installation video on Youtube it took out any of the guess work. The hose could stand to be about 3" - 5" longer if you are going to center in the A frame of an older chevy grill (I have an 06 Avalanche. I had to offset to the passenger side to use the supplied hoses) But, you can get a longer hose easy enough. Just ran over the pass and back and no leaks. Looks good so far!
Worked good easy hook up
Exactly what I ordered. Quick shipping and all parts needed for installation included! Always easy to find what I need at E-Trailer!
Everthing as described. From ordering to the home delivery, I was informed every step of the way Good old fashion Americian business! The way it should be done.
You guys set the bar high when doing buisness!
Thanks a million!
Easy install. But hoses need to be longer. I had to go to napa to purchase an extra 3 ft. The hose clamps that were included were limited to the amount of tension that were put on them. They would tighten to x amount then just spin. I had to purchase extra hose clamps that actually tightened.
Impressed overall.
We're an independent auto and truck repair parts were delivered promptly. Seem to be good quality and fit great on our customers unit thanks..
Dropped transmission temperature buy 25-30 degrees. I would recommend for anyone trying to help out their tranny.
easy installation & works great, good v alue.
works well, wouldn't buy one any smaller than this one.
Doug
7/2/2019
No issues, good product, thanks etrailer.
Very fast shipping. Everything was there and in pretty decent condition. Would have been perfect, but some fins were bent, though it could have been the delivery company. Definitely recommend
Fast Shipping Customer Service is Great. They sent me a list of everything I needed.
WOW, My order came fast, I'll be shopping with them again!
Fast shipping, good price!!! Thank you
Great cooler upgrade for my 1997 GMC Yukon! Little delivery damage, but was so easy to bend those fins back to original shape so no worries!
Nice that you had proper dimension measurements online, so it was easy to figure out what kind I can fit in my truck. Complete kit had everything I needed to get it done!
Modified old cooler bracket little bit and that was it. Works great!
Removing the front bumper/grill on my Odyssey was a must! Installation was pretty much straight forward once you confirm the feed, and return connection points. Mounting the actual cooler to the front radiator was the easiest part of the job. My Odyssey made two 650 mile trips pulling 2050 lbs with no problems so I’m very happy with the cooler!
good product form a great company !
my only complaint is this was listed as for my specific truck, but the "insta-dapt" supplied doesn't fit the Dodge truck of my year. even doing my research ahead of time, it seems to be hit or miss whether it would fit as some of them come with 5/16 fittings and some (like mine) come with 9/16 fittings. it doesnt matter the engine size, even other 3.7L dodge trucks of the same year have 5/16 fittings... I think Dodge made a change middle year, but never let the consumer know as mine is a late year '04.
no dig deal as I was able to assemble it anyways and got it up and running great and both the radiator and trans are running much cooler now !
I attached the D12902 to the bumper as you will see in attached images.
2 attached images are just before finishing, bumper hasnt been attached yet, one of them is after everything was complete.
Do you have a question about this Transmission Cooler?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
4/3/2023
Is there anything we can do to help with installation?