Recommended Transmission Coolers for a 2001 Ford F-250 Super Duty 7.3 Liter V-8
Question:
need to replace transmission cool and not sure if it has super cool or not? how can I tell if I need a different cooler? Thanks
asked by: matt
Expert Reply:
Transmission coolers are not vehicle specific, but there are some that are recommended for your 2001 Ford F-250. The Derale, # D13502 is one of them.
Basically, regardless of a super cool feature, you will need to choose a transmission cooler based on where you can mount it. The most efficient place is between the grille and AC condenser core(position A on the picture to the right). The second most efficient place is between the condenser and radiator(position B). In this position, it will be 25 percent less effective. The least efficient location is between the radiator and engine (position C). The cooler will be 40 percent less effective here and it is recommended that if you must mount the cooler here, you get a larger cooler to make up for the loss.
Other coolers recommended for your truck are:
Class IV Derale Dyno-Cool Transmission Cooler, # D12904
Class II Derale Transmission Cooler, # D13501
Class IV Derale Transmission Cooler, # D13504
I have included a link to an FAQ article on transmission coolers that has a lot of helpful information.
Products Referenced in This Question
Derale Dyno-Cool Tube-Fin Transmission Cooler Kit - Class IV - Economy
- Transmission Coolers
- Tube-Fin Cooler
- Full-Size Truck
- SUV
- Standard Mount
- 15-1/4W x 10T x 3/4D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class II - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Small SUV
- Standard Mount
- 11W x 5-3/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class IV - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Full-Size Truck
- SUV
- Standard Mount
- 11W x 12T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Product Page this Question was Asked From
Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient
- Transmission Coolers
- Plate-Fin Cooler
- Mid-Size Truck
- SUV
- Van
- Standard Mount
- 11W x 7-1/4T x 7/8D Inch
- With 11/32 Inch Hose Barb Inlets
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Transmission Cooler
- Article: Frequently Asked Questions About Transmission Coolers
- Article: Determining Trailer Tongue Weight
- Shop: Transmission Cooler
- Shop: Brake Controller
- Shop: Trailer Hitch
- Shop: Vehicle Engine Heaters
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Shop: Grille Guard
- Video: Rear View Safety Wireless Hitch Camera Review
- Video: Trailer Hitch Installation - 2005 Honda CR-V - Draw-Tite
- Video: Stability Plus Stabilizer Helper Springs Review
- Video: Best 2006 Honda CR-V Tow Bar Wiring Options
- Video: Trailer Wiring Harness Installation - 2006 Honda CR-V
- Video: Roadmaster 4-Diode Universal Wiring Kit Installation - 2012 Honda CR-V
- Video: Curt Hitch Mounted Cargo Carrier Waterproof Bag Review
- Shop: Derale Dyno-Cool Tube-Fin Transmission Cooler Kit - Class IV - Economy
- Shop: Rear View Safety Wireless Hitch Camera
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Pole Flat Connectors
- Shop: Curt Cargo Bag for Hitch Mounted Cargo Carrier - Waterproof - 15 Cu Ft
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: Edge Insight CS2 Comprehensive Gauge Display - Color Screen
- Shop: Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers
- Search Results: air bags
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Search Results: cargo carrier
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)