Torklift Camper Tie Downs for 2021 Ford Super Duty with 8 foot Bed

Question

Question:

I have a camper that I want to put on my long bed 2021 Super Duty Ford truck. What do you recommend ? I would like to get the brackets for front and rear and also a rubber matt to lay down in the bed. I already have the tie downs. In the bed the truck has a factory installed plug in. I assume I can get an extension to plug in to it from the camper ? Thank you

asked by: Patrick B

1

Helpful Expert Reply:

For a set of Torklift tie downs that fit your 2021 Ford F-350 long bed you'd want the part numbers # TLF2021 and # TLF3008 which are custom fit.

For a rubber mat that fits your bed you'd then want the Westin part number # 50-6415.

For a 7-way extension we have a few options like the part # TLW6024 which is 24 inches long, part # TLW6036 which is 36 inches long, and part # TLW6042 which is 42 inches long.

expert reply by: Jameson C

1

Answer 1

Of the two part numbers you mentioned only the #TLF2022A is a fit for your 2022 Ford F-350 short bed without factory board and with the factory installed hitch. You might have meant to type #TLF2022 which is the non-aluminum/stainless steel option…

view full answer...

Answer 2

You'd need new Torklift camper tie downs for your 2017 Ford F-350 as the fit from a 1996 F-350 is not the same. You'd need the part numbers #TLF2021 and #TLF3008 for your new truck since you do not have step bars and do have a factory…

view full answer...

Answer 3

You're actually on the right track, here. The TorkLift Custom Frame Mounted Tie Downs #TLF2021 and #TLF2021A (aluminum) are a confirmed fit through TorkLift for the 2020 F-350 with the running boards that extend past the cab of the truck. Since…

view full answer...

Answer 4

We do have the parts you're seeking for your 2021 Ford F-350. If you wanted a stake pocket tie down, the Brophy Stake Pocket Mounted Camper Tie Downs - Bed Mount - Black Powder Coated Steel - Qty 4 #TDSF are a universal solution that would work…

view full answer...

Answer 5

I spoke with my contact at TorkLift regarding the Custom Frame-Mounted Camper Tie-Downs for your 2018 Ford F-450. He stated that while they have not been able to physically test the fit on your 2018 model F-450, it is very likely that the #TLF2021…

view full answer...

Answer 6

The TorkLift Talon Custom Frame-Mounted Camper Tie-Downs #TLF2021A are confirmed to fit your 2017 Ford F-350 with factory running boards, as well as a factory trailer hitch and will not interfere with your running boards or with use of the tie down…

view full answer...

Answer 7

There are a few different tie-down fits for your 2017 Ford F-350 Super Duty with an 8' bed, but it all depends on if you have a board or step underneath the truck bed, and if you have a factory hitch or not. When aluminum is available it is a…

view full answer...

Answer 8

Using a hitch extender is safe as long as you stay within the limits specified of 50 percent of the hitch and vehicle load capacity, and 350 lb tongue weight capacity of part #HE06. The other option to provide additional clearance from your spare…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...