Is There an Extension For a 7-Way Trailer Wiring Harness

Question

Question:

7 pin female to 7 pin male extension? do you have this?

asked by: Matthew A

0

Expert Reply:

We absolutely have an extension for a 7-way trailer wiring harness with a male and female end. You can choose from a number of different lengths in order to get the size you need. I'll go ahead and list out the extensions by overall length so you can get the correct one for your needs.

- 24" Long: TorkLift Wiring Harness Extension # TLW6021

- 28" Long: TorkLift Wiring Harness Extension # TLW6024

- 32" Long: TorkLift Wiring Harness Extension # TLW6028

- 38" Long: TorkLift Wiring Harness Extension # TLW6032

- 42" Long: TorkLift Wiring Harness Extension # TLW6036

- 48" Long: TorkLift Wiring Harness Extension # TLW6042

- 57" Long: TorkLift Wiring Harness Extension # TLW6048

- 68" Long: TorkLift Wiring Harness Extension # TLW6060

The only other thing you may need if you don't have one is a bracket for the 7-way, which you can get with the Hopkins Universal Mounting Bracket for 7-Way and 6-Way Trailer Connectors # HM48625.

expert reply by: Kyle S

0

Answer 1

To extend a 7-way 48 inches you'd want the part #TLW6048 which comes with a 7-way male on one side and female on the other. If instead you were looking for 10 feet the part #TLW6510 would be what you'd need. These are the best…

view full answer...

Answer 2

Thanks for the pictures! My main concern in recommending a shorter extension, like the 36" TorkLift SuperTruss item #TLE1536, is clearance when making turns. The 36" would clear your camper and allow you to install your tow bar without…

view full answer...

Answer 3

There is a trailer hitch receiver that fits your 2024 Mercedes-Benz Sprinter 2500, made by Curt. The correct part number is the following: - Curt Trailer Hitch Receiver #C13388

view full answer...

Answer 4

Just a single difference exists between the Curt and etrailer trailer hitches for your 2024 Mercedes Sprinter 2500 with a factory step bumper, which is the finish. The etrailer hitch has a matte black finish, while the Curt hitch has a glossy black…

view full answer...

Answer 5

The Curt trailer wiring harness part #CU86FR that you referenced does come with a converter. It is mentioned in the description and pictured in product pictures as well. So the easiest to install brake controller that also works really well is the…

view full answer...

Answer 6

While we don't currently have an installation video for the Curt T-Connector Vehicle Wiring Harness with 7-Way Trailer Connector #CU86FR on a 2022 Honda Pilot, we do have an installation video for the Tekonsha #118286 on a 2020 Honda Pilot. The…

view full answer...

Answer 7

I would be happy to help you find a hitch receiver for your 2021 Mercedes-Benz Sprinter 2500 van with a factory step. In order to haul a trailer you are going to need a wiring harness as well. The Curt item #13358 you were looking at is the best…

view full answer...

Answer 8

If you connect the trailer brake light circuit to the trailer brake circuit your brakes would lock up immediately since 12 volts is max braking voltage for trailer brakes. You'd need a brake controller that can vary voltage so that you can apply…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

If you're going to use a winch to raise and lower your popup you will want a winch that power loads both in and out. With a winch that will only power load in you will only be able to raise the popup and not lower with the winch. We have the…

view full answer...

Is There an Extension For a 7-Way Trailer Wiring Harness

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching